TS4062 after my software installing,my iPad is not starting..it shows an icon of my usb cable pointing towards iTunes..please guide me

after installing software update ,my ipad is not working just showing my usb cable pointing towards iTunes.kindly help me

That is a message telling you to connect your iPad to your computer and launch iTunes. Do it and see what happens. You may need to restore your iPad but first just connect the iPad to the computer and see if iTunes instructs you to finish the update.

Similar Messages

  • TS3694 I tried to update my ipad, now its stuck on a screen with a cable pointing towards itunes and asking me to restore, then it tells me that it wasnt able to restore because of a currupted file.  dont know what to do

    How do I fix my Ipad, tried to update it, now its stuck on a screen with a cable pointing towards itunes and asking me to restore, but i cant, it tells me that restore was interrupted because of a corrupted file. 

    If you want to manually download the update go here.
    http://osxdaily.com/2013/01/28/ios-6-1-released-download/
    If you want to try recovery mode which is what Apple recommends if you are unable to update or restore your iPd, go here.
    http://support.apple.com/kb/ht4097

  • My ipad is not charging while connected to any device via usb cable

    my ipad is not charging while connected to any device via usb cable

    If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

  • After stalled software update, my iBook will not start up all the way.

    Here's my problem:
    I was almost done with software update when the process seemed to stall for no apparent reason. The software update status screen said my iBook was 67% done with hard drive optimization, and stayed in this state for 15-20 minutes. The computer itself was not frozen, however, so I forced quit and tried to restart the machine.
    On the restart, however, I couldn't get out of the gray screen with a status circle made up of small rectangles. I tried to force restart, but the situation did not improve.
    Can anyone help me?
    Thanks.
    -Aaron

    Welcome to Apple Discussions Aaron
    Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
    Post back

  • TS3274 iPad does not start after the latest software update

    After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

    If the reset doesn't work, force iPad into recovery mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • TS1702 After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    After I updated my new Ipad  with IOS 6, now Map& Dictation icon are not working. please help me

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

    I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?

    You know that you have to connect the iPad to your PC with the cable that came with it -  and then iTunes should start automatically and it will guide you through the set up process?
    If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again.

  • After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

    After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

    Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • HT201413 i just get sync cable pointing at itunes on ipad after downloading update

    i just get sync cable pointing at itunes on ipad after dowloading update

    I have this also, and nothing happens from here. Whast did you do next to complete the download?

  • TS4006 After hitting update , find my iPad will not update on my iPad 1

    After hitting update , find my iPad will not update on my iPad 1
    Suggestions?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • TS1702 iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. Have tried to reset it (not responsive), link to iTunes (not recognized), etc.

    iPad is not responding. It ONLY shows an iTunes icon and a USB cable in the middle of an all black screen. I have tried to reset it manually and via iTunes (not responsive), linked it to iTunes (not recognized), etc. Nothing works. This happened after an iTunes updated, after I was asked to "restore" my iPad to factory settings.

    Thanks, King_Penguin. Yes, I tryied putting the iPad into recovery mode. It freezes in the black screen with the iTunes and USB cable. When I followed the instructions and then started iTunes, I received the following message: "A required iTunes component is not installed. Please repair or reinstall iTunes (-424040)".
    I have unistalled iTunes three times already and donloaded and installed three new versions. No luck.
    Thanks a billion once again!

  • After update 7.1.2 Iphoto does not start

    After installing the 7.1.2 update, Iphoto does not start anymore. only the Icon bounce in the dock a few times.
    Restoring the previous Iphoto.app in the applications folder resolves it and iphoto works O.K.
    when i install the 7.1.2 update it again does not start.
    Can someone help me with this??
    Roland

    You should probably post in the iPhoto discussions:
    http://discussions.apple.com/category.jspa?categoryID=143

  • My iPad does not start. What can be the problem

    My iPad does not start. What can be the problem

    Does anything happens when you try to switch it on ? If not, then assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT201274 My ipad will not start

    My ipad will not start. 
    I have to do a hard reboot inorder for it to turn off.
    It just get the start white apple and then it restarts after a few minutes. 
    I also cannot access the ipad via itunes and therefore I cannot do a restore.  I could access it before the problem happened.
    This occured after I updated an app and did a reboot.   The update never completed itself (Flipboard)
    The itunes is the lastest version.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for

  • New ALV field is not displaying

    Hi I have added the currency field in the existing ALV report. The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help Below is my ALV code for currency. PERFORM FILL_FIELDCAT USING 'WA

  • How do put my music on my PC from My Library on Itures

      How do put my music on my pc from my Library on Itunes?  Are you there

  • Pre-populate CS4 installer serial number

    Ive used the Adobe Create Suite 4 Deployment Toolkit to create a silent installer for Photoshop. While this will be useful for unattended installations, I am also looking for a way to control a manual installation, filling in the serial number for th

  • Asset substitution rules for mass changes

    Dear all, I create worklist in order to use substitution rule for mass change. But when running transaction AR31 I have following error message: No administrator found for the task Message no. 5W141 I found transaction OAWF but what must I do with th

  • Where do i find my iphone backup

    My iphone 5s screen is smashed so although I am getting a new phone from the insurers, I went to Timpsons first to get it fixed so I could access the screen and photos (only part screen previously possible).  They fixed it, but the home button didn't