TS4062 After syncing my nano the synced content, TV shows, do not show up on the nano.
After syncing my nano the synced content, purchased TV shows, do not show up on the nano.
Duplicate thread see
http://discussions.apple.com/thread.jspa?threadID=1703551&tstart=15
Similar Messages
-
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
After syncing my iphone I found that all of my notes were erased from the phone. Is there any way to retrieve the notes now that they have been erased? I had some very important notes that I have to be able to find. Anyone know how?
I think those contacts still in iphone database. So you can back up you iphone with itunes to get iphone database off your iphone. Then access the SQLite batabse.
http://support.apple.com/kb/HT1766
All data included with the backup is stored in a SQLite database format with the data within various folders not easily accessible.There are some 3rd party utilities that provide for extracting select data from an iPhone's backup and iphone database such as this one.
http://www.datarecoveryforiphone.com/ -
I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)
Of course it always works, what are you talking about.
I appreciate that re-downloading is only available in the US and then only with certain content. However content that cannot be re-downloaded is not offered for purchase on the Apple TV. -
I thought I would restore my iphone so I backed it up and everything it backed up fine.
It will put the firmware on the phone fine it also syncs but it come up and says warring it didn’t sync the number of apps. Then I press ok then I get this.
iTunes could not sync information to the iphone because a connection could not be established to the iphone
When I re plug in the I phone in it shows it the data synced but it’s all other
It’s just a 8 gig I phone
I up dated to windows 7 so I thought that was it so I tried it with windows xp the same thing happened
And the newest I tunes would a older I tunes workI thought some screen shots may help
The first one is at it syncs you can see at the bottom the apps are green and the other is yellow like it should be.
this one is after it syncs and the frist Warning notice the other now
warn #2
warn #3
and the i phone -
My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks
Click here: https://supportprofile.apple.com/MySupportProfile.do
SIgn in with your Apple ID, the same one you used to access this support forum.
Hopefully, you will see a list of all the devices you registered with your Apple ID, including their serial numbers. Let me know how this works out.
Edit to add: If you enabled "find my imac" on your Pro, you ought to be able to remotely lock it, or even wipe its memory. Click http://www.icloud.com/ sign in with your Apple ID and click the big green "find my iPhone" icon (nevermind the name, it will find all your devices provided they're running Lion or iOS 5).
Then file a police report and nail the b*****d. -
Hi I recently purchased a new mac computer and would like to sync the music off my iPhone to my new mac.However, my phone and my new mac have different apple Ids.The PC which my phone is synced and has the same apple ID but does not let me transfer the music. Home sharing is not working. How do I successfully transfer and sync the music off my ipone 4 to my mac book pro if they have different Apple IDs? Thanks!
What do you mean the PC won't let you transfer the music? Save your entire iTunes folder (this is assuming that you have all your music stored in your iTunes folder) to an external hard drive. Connect that hard drive to your Mac. Copy the iTunes folder to your computer. Hold down the option key while launching iTunes on your Mac. Select the library you just copied when it ask you to select which library you want to open.
-
When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I'm trying to sync my ipod with my computer, but when you're supposed to click on "my ipod" in the devices section on the left collum, my ipod is not showing.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
I restored my iPhone and when sync with iTunes is in progress I receive the error message "iTunes could not back up the iPhone because a session could not be started with the iPhone." Any suggestions on what to do?
Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray -
Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?
I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?
-
I cannot sync my iPod. I keep getting the following messagei: AppleSyncNotifier.exe. entry point not fond. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll Help!
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck
Maybe you are looking for
-
Does Adobe Reader Disable window.close()?
Help! I open a window using onclick='javascript:MyWindow=window.open("Meeting.pdf")' But the following fails when trying to automatically close that window <body onunload="MyWindow.close()"> This same code works fine when MyWindow does not have a P
-
4Gear and the iphone4: docking problem
iPhone 4 fits perfectly into original iPhone dock. as long as you don't use a 4Gear case... I bought the apple universal dock this week, after reading the fitting perfectly theory... I gave away my existing universal dock with the 3G I sold, darn it.
-
Getting EQP-80407 & ORA-00918 error in SES query
Hi, We are using SES to implement Third party search and created a new data source of type "Database" to crawl the external db. when we start the scheduler to crawl the db, getting the following error: EQP-80407: Exception while processing document:
-
Hi, I need to load the xml data into the relational tables. I was trying to use a DOM parser, but the thing is that i had to hard code the element node values to match the columns in the tables, and in later stage if there is change to the xml i have
-
Deleted email with attachments
How do I recover my attachments from a deleted iCloud email?