TS4062 Error code -50 on iPhone

I am getting error code -50 when trying to sync my iPhone 5c with my MacBook Pro. Any suggestions re: cause and remedy?
Thanks for any help/suggestions.
Nycco

Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
1. Turn off and restart the mobile device.
2. If the device is connected via USB, connect it to a built-in port on the computer, not to a hub. If it's already connected to a built-in port, try a different one. Also try a different cable, if you have one. You can also try to sync over Wi-Fi.
3. Delete the iPod Photo Cache. Quit and relaunch iTunes.
4. Check the names of all albums and slideshows in iPhoto. The names should contain only plain letters and digits, not any punctuation marks or other characters. Rename them if necessary.
5. Remove the soundtrack from any iPhoto slideshows that have one. If sync now works, you may be able to restore the soundtracks.
6. Repair or rebuild the iPhoto library. Be sure to back it up first.

Similar Messages

  • Error code when syncing iPhone

    Elements 7 used to work just fine with my iPhone until about a week ago.  iPhone upgraded it's software during this time.
    Now when I try syncing iPhone, Adobe Photo Downloader opens, finds the iPhone, starts loading pics, then a window pops up with the following code:
    Error Code c0000005
    Address 7c910a19
    Then Adobe shuts down without moving any of the pics.
    It used to work fine, now nothing.
    Apple insists that the problem is from Adobe's side as they have no record of that error code.
    Anyone have an idea?

    I followed the advice to remove email attachments, and tried some additional steps.  Here's what I did:
    First, I deleted any photos from the iPhone that were saved from email attachments.  I then tried to download via APD.  The same error came up as before and APD terminated itself.
    Second, I deleted any photos saved from any other source (web pages, etc), as well as any photos that had been created by iPhone photo editing apps.  The only photos left on my iPhone were those taken specifically with the iPhone camera and not altered by any other app.  I then tried to download via APD again.  Again, I got an error and APD terminated itself.
    Third, I tried removing all vidoes from the iPhone.  Again, I got an error in APD and it terminated itself.
    Fourth, I deleted all remaining photos from my iPhone, leaving the Camera Roll on the iPhone completely empty.  I then took a new photo with the iPhone and tried to use APD to download it into PSE Organizer. It worked fine.  No error.
    Fifth, I attached a photo from another source to an email and sent it to my iPhone.  I received the email on my iPhone and saved the attached photo to my iPhone's Camera Roll.  I then used APD and was able to download both photos (the one taken with the iPhone and the emailed attachment) into PSE.  Apparently, being a saved email attachment is not, on its own, enough to cause an error in APD.
    Conclusion:  I can, for the time being, use APD to get photos from my iPhone into Elements.  It seems APD didn't like something about one or more of the photos previously on my iPhone.  Only time will tell if this issue could come up again.
    I hope this helps some of you who have the same problem, since official PSE support is so lacking.

  • Error code while downloading iPhone update

    I've tried at least 10 times to download 1.1.3 Each time I'm told the download failed and the reason is error code 3256. Anyone else have this problem? Any ideas?

    Has anyone figured out the 3256 error? I've tried getting the Jan 08 iphone update about 10+ times and can't get past this. The link in the prior string didn't address a fix. My firewall says "allow all incoming connections" so I'm still confused as to why I can't get this update.

  • TS3694 error code 1015 for iphone 3g

    I am trying to restore my iphone 3g, but every time I try I get the error code 1015, help!

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Tried to restore and update but got error code after download, iphone 4 on verizon...ios 4.2.1 tried to restore and update but got error code after download

    iphone 4 on verizon(16 gb) ios 4.2.1 tried to restore and update but got error code after download.... all the iphone does is sit there with the picture to connect to itunes. This is very important, please help!!!!!! updated itunes and restarted and have tried everything... this iphone has never been synced or backed up with itunes. please help!

    error 1015 usually means you have a jailbroken  devices, which per the term of use of the forum, you can't get any help here.

  • HT201412 What is error code 1015 for iPhone 3G

    What is error code 1015 in iTunes for iPhone 3G

    It means the iOS has been tampered with and the phone is jailbroken

  • Error code 17 on iPhone 6

    Experiencing error code 17 when I connect my iPhone 6 to my mac. It is stuck in restore mode...Is there any way that I can restore my phone back to factory settings. My Mac is fully updated.

    Resolve iOS update and restore errors - Apple Support

  • Error Code while Restoring iPhone in iTunes

    Hello everyone i have a problem of my iPhone 5 and iTunes i downloaded the newest iTunes Version and when i downgrade my iPhone 5 iTunes says Error code (3194) i want to downgrade my iPhone 5 to ios 8.1.3 because i updated it to iOS 8.3 and also when i try it again it keeps saying the same error.

    Sorry, but downgrading is not supported, that's what the error is about.
    The only thing to make sure that the software is installed correctly on your phone would be setting it back to factory settings, without using any backup data afterward and setting up the personal data manually.
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • HT201263 Error code 2001 on iPhone 4s

    My wifes phone got wet in my pocket. tried to reset and i keep getting an error code 2001 from iTunes.  apple store won't touch it because they think i have submersed it in water. Can anyone help before i do throw it in a river

    First make sure the iPhone is dry, dry n a sealed container with uncooked rice for a week and periodically change the rice.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Apple will exchange your Phone for a refurbished one for $199
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    $269
    iPhone 4s
    $199

  • HT4061 I can't download an application from Apple store. A message comes' your request cannot be processed'. Error code 1009

    Hello,
    I cannot download an application from Apple store. A message appeares  "your request cannot be processed. Error code 1009 "

    hi
    i have a messege ( your request cannot be processed error code 1009) my iphone is 4s with ios 7.0.4 .
    so cannot download in itunes
    if i creat a new apple id problem is solved
    thanks

  • TS3694 have error code 3194. how can i get ride of it

    have error code 3194 on iphone 4..phone dose not turn on

    look to the right in the MORE LIKE THIS box

  • HT201412 Error code 1015 everytime

    I have tried to restore the phone to its original status but it gives me an error code 1015 everytime - iphone 3G

    Do a Google search for "os x error 1015" which should give you helpful links to solve the problem.

  • HT1414 what does error 1015 mean during iPhone restore?

    What does it mean with error code 1015 during iphone restore process

    Error 1015 is most often given as a downgrade Error. This is most often due to the iPhone having the iPad baseband 6.15.00 installed. This 6 series baseband is higher than the current 5 series basebands. So when iTunes tries to install the current 5 series baseband, it is superceded by the installed iPad 6 series baseband, thus iTunes is attempting to downgrade the baseband to the 5 series, which Apple will not allow. This not allowed try at a downgrade stops the Restore process and results in the Error 1015. This error is now completely fixable, you must search the Web for the fix. The fix will allow future normal Restores with iTunes and will fix the GPS chipset which is compromised by the iPad baseband.

  • TS3694 how do i fix error code 1015

    how do i fix error code 1015 my iphone 3g will not start up it come up with connect to itunes sign and when i try to restore it it comes up with error code 1015

    Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

  • I just bought my iPod Touch 4g earlier today and it wont connect to iTunes, the iPod icon is there and when I try to restore I always end up with an error code. (1611)

    I just bought my iPod Touch 4g earlier today and it wont connect to iTunes, the iPod icon is there and when I try to restore I always end up with an error code. (1611)

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Maybe you are looking for

  • In the installation process lion will not install as message  reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

    After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked . Any body got any idea what to

  • QM certificates vs. DMS

    Hi SAP recommends to use the Archivelink functionality to store In-coming QM certificates. However, these business documents cannot be linked to other SAP objects, like for instance an Equipment (tools). An alternative solution could be to use the Do

  • Workflow Mailer Service not starting

    Hi Friends, My Environment OS : OEL4U5 Application Vers : R12.1.3 Db Version : 11.1.0.7 Hostname : erptest01 Here we configuring the Workflow Notification Mailer Service in our R12 instance. When we trying to start services in the workflow service co

  • 2.4GHZ clients very slow speeds with AP3600

    5508 WLC (7.5.102) AP36021 We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption. For some reason we seem to be getting very slow speed

  • How to add string to sendbuffer in visual basic?

    1.if buffer type=FML,then ' Fchg(sendBuf, Fldid("ACCOUNT_ID"), 0, accountNumber&, 0)' can add the accountnumber into sendbuffer. 2.if buffer type=STRING ,then how can i add a simple string into sendbuffer before the tpcall()? Eager for the reply.