TS4062 How long should it take to set up my ipad using itunes?
How long should it take to set up my ipad using itunes? Everything went blank on my iPad and I am attempting set it up using itunes. It has been connected for 45 min and gives me a set up incomplete message if I attempt to exit.
I did some check on available sources on the topic and it seems that the app data is often causing a slow backup:
What causes the slow backup?
It’s the Apps! Apps on the iPad might store data to work properly. Some do store a lot, some don’t. For instance a game saves some highscore data (not very much), where a newspaper App or a rss reader might save updated data (can be very much). I believe lots of iPhone users, that experiencing slow backups, have problems with one or many Apps that are leaking in terms of saving tons of tiny files to the iPhone, especially when they have a lot of Apps and when they did backups cross devices (i.e. iPhone 2G to iPhone 3GS).
The article on this website http://apdevblog.com/slow-itunes-sync-backup/ should provide more information and hopefully a fix for your issue!
Similar Messages
-
How long should it take to set up maverick
Been "setting up" for three hours - beginning to worry.
Installing Mavericks on a broadband connection should take about 45 minutes to an hour. If you are using a DSL connection, you may not be able to download and install Mavericks as it's an 8GB file as noted here > OS X Mavericks: System Requirements
The download may time out before it can finish.
Keep in mind, with Mavericks installed, at some point you may need to restore OS X or repair the startup disk. That requires a broadband connection as noted > OS X Recovery -
How long should it take to set up AppleTV to iTunes Match
It has been running for hours. I have about 6500 songs, 29 GB, probably not the fast internet connection speed. Is there anything I can do?
Never mind, I got it. Nothing that a reset won't fix!
-
How long should it take to charge the newest iPad?
My battery was completely drained when I went to bed last night. I plugged it into a wall outlet and 9 hours later it is only charged to 89%. Is this normal? I have a WIFI only 64GB iPad.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explainedhttp://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8 -
I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?
Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot. -
Ripping DVD's - How long should it take?
How long should it take to rip a whole DVD? PQDVD seems the easiest, but it rips at 1x speed (or close to it). Are there programs out there that do it faster? Are there programs that are cheaper? $35 is a lot of money.
I use DVD Decryptor (free) to rip the VCD files from the DVD.
I then use Videora for iPod to encode them to MP4.
Time for DVD Decrypt is about 15 minutes for a 2 hour movie.
Time for Videora is about an hour and a half for a 2 hour movie (give or take a half hour).
DVD Decryptor needs to be set to Not split the files based on size, and there is another tab that asks if you want to split the VCD files at all. Both set to none, find in the options screen.
Good luck! -
Yesterday we were forced to perform a non-authoritative sync of the SYSVOL folder as replication had stopped because one of the DCs had been disconnected from it's replication partner for more than 60 days (caused by a unexpected shutdown and we did not
pick up on the fact replication had stopped until now).
I performed the non-authoritative sync of the SYSVOL folder and now the folder is in state 2
ReplicatedFolderName ReplicationGroupName State
SYSVOL Share Domain System Volume 2
and has been for more than 12 hours. The DFS replication health report, reports "This member is waiting for initial replication for replicated folder SYSVOL Share".
How long should it take and is there anyway to force it so that replication can resume?I'm fairly sure it's not tombstoned. Here is the DCDIAG output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = RC-CURDC-02
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Connectivity
......................... RC-CURDC-02 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\RC-CURDC-02
Starting test: Advertising
......................... RC-CURDC-02 passed test Advertising
Starting test: FrsEvent
......................... RC-CURDC-02 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... RC-CURDC-02 passed test DFSREvent
Starting test: SysVolCheck
......................... RC-CURDC-02 passed test SysVolCheck
Starting test: KccEvent
......................... RC-CURDC-02 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... RC-CURDC-02 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... RC-CURDC-02 passed test MachineAccount
Starting test: NCSecDesc
......................... RC-CURDC-02 passed test NCSecDesc
Starting test: NetLogons
......................... RC-CURDC-02 passed test NetLogons
Starting test: ObjectsReplicated
......................... RC-CURDC-02 passed test ObjectsReplicated
Starting test: Replications
......................... RC-CURDC-02 passed test Replications
Starting test: RidManager
......................... RC-CURDC-02 passed test RidManager
Starting test: Services
......................... RC-CURDC-02 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.96.64, is 83 percent full with only 7 IP addresses remaining.
A warning event occurred. EventID: 0x000003FC
Time Generated: 06/12/2014 18:26:05
Event String:
Scope, 10.59.98.0, is 95 percent full with only 5 IP addresses remaining.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.96.64 is 83 percent full with only 7 IP addresses available.
A warning event occurred. EventID: 0x00000560
Time Generated: 06/12/2014 18:26:05
Event String:
IP address range of scope 10.59.98.0 is 95 percent full with only 5 IP addresses available.
A warning event occurred. EventID: 0x000016AF
Time Generated: 06/12/2014 18:39:43
Event String:
During the past 4.23 hours there have been 95 connections to this Domain Controller from client machines whose IP addresses don't map to any of the existing sites in the enterprise. Those clients, therefore, have undefined
sites and may connect to any Domain Controller including those that are in far distant locations from the clients. A client's site is determined by the mapping of its subnet to one of the existing sites. To move the above clients to one of the sites, please
consider creating subnet object(s) covering the above IP addresses with mapping to one of the existing sites. The names and IP addresses of the clients in question have been logged on this computer in the following log file '%SystemRoot%\debug\netlogon.log'
and, potentially, in the log file '%SystemRoot%\debug\netlogon.bak' created if the former log becomes full. The log(s) may contain additional unrelated debugging information. To filter out the needed information, please search for lines which contain text
'NO_CLIENT_SITE:'. The first word after this string is the client name and the second word is the client IP address. The maximum size of the log(s) is controlled by the following registry DWORD value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize';
the default is 20000000 bytes. The current maximum size is 20000000 bytes. To set a different maximum size, create the above registry value and set the desired maximum size in bytes.
......................... RC-CURDC-02 passed test SystemLog
Starting test: VerifyReferences
......................... RC-CURDC-02 passed test VerifyReferences
Running partition tests on : curriculum
Starting test: CheckSDRefDom
......................... curriculum passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... curriculum passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running enterprise tests on : riddlesdown.local
Starting test: LocatorCheck
......................... riddlesdown.local passed test LocatorCheck
Starting test: Intersite
......................... riddlesdown.local passed test Intersite
Eveything is passing, except for the bits about the SystemLog and DFRS, all seems good to me.
Event 2213 is in the logs. I will look and changing the MaxOfflineTimeInDays and see if that gets it going. -
About how long should it take to process a 1:40m movie in iMovie 11?
about how long should it take to process a 1:40m movie in iMovie 11?
Hi
And the free space avail. on the Start-Up (Macintosh HD) also play an important role.
For interlaced SD-Video Quality (as on old fat TVs) - I never go less than 25Gb free space (per hour Video)
For HD - about 4 - 5 times more
If strange Video-Codecs - that might need lot's of conversions to be used - then multiply with 2 - 3 times more and Hope.
I make the conversion of raw material first outside iMovie to make things easier.
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W -
How long should it take for an icloud backup of about 6.4GB? I selected a manual backup and it has been running all night? Thanks
That's going to depend alot on your internet connection speed. 6.4 GB is alot of data, especially if your connection speed is slow (DSL) or low-end cable speeds of ~1.5 Mbps.
-
How long should it take it to back up icloud to iphone 5c?
The answer depends on the amount of data to be restored, the speed of your Internet connection, and wireless network conditions. It could take the better part of a day.
-
How long should it take to download Mountain Lion?
How long should it take to download and install Mountain Lion? I have been downloading it for about 5 hours and it still has 1 gig to go. My current OS X is 10.7.4
It depends on what bottlenecks you have interposed.
If you have a fast Ethernet connection, not cable Internet, that is not throttled by your ISP, and are using fast Ethernet on your local network, you should be able to download in about an hour.
If you are transmitting it over your wireless connection, it may take substantially longer. -
I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?
About all you can do is wait until it finishes or you get an error message.
-
Can anyone help please?
Lion download to iMac has been running for about 2 hours and is still not halfway yet. How long should it take? should I cancel and start again?1500Kbs is 1.5Mbs. That is Kilo bits per second. There are 8 bits to a byte so if you divide 1500 (or 1,500,000) by 8 you get 187500 bytes a second. Divide 3.5GBs (3,500,000,000), that capitol B is for Bytes, by that 187500 you get 18666.666 seconds. Which needs to be divided by 60 to get the minutes and then again by 60 to get the hours.
5.1851xxx hours.
I use to have a 3Mbs DSL connection and it took me over 3 hours to download Lion. Now that I have a 19Mbs Cable connection it take about an hour to download and install.
So wait it will happen eventually. If you cancel and start again your are still going to wait 5+ hours. -
I have tried downloading the update for Firefox 3 times, but had to go to bed before it was finiahed....seemed to be more than 45 minutes is this normal? How long should it take?
Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591 -
MAc book pro. I have downloaded and installed os x yosemite now mac book pro will not start? How long should it take? Is there something wrong?
The 2 computers here took about 45 minutes to an hour each.
The best thing to do is give it more time. If it gets too ridiculous, shutdown using the power button and then restart. Check menu/About This Mac to see if it is installed.
Maybe you are looking for
-
How can I "archive" mails in Mail App to another internal drive/partition to save space but still have it searchable in spotlight (and preferably visible, searchable, draggable in Mail App)? Background: I am using Mountain Lion and Mail App and runni
-
I have an iPhone 3G, and cannot update my iOS. In the General tab, "Upadate Software" is not even there. It just goes from "About" to "Usage". When I try to update on iTunes, it always remains the same. iOS 4.2.1. Any suggestions? (My PC uses W
-
I was importing images from my camera and the battery went dead on the camera and now Aperture will not stop processing and i have to force quit to get out of it. Is there a fix -it guide out there?
-
Indesign CS4 Problem with weird characters HELP!!!
I am rather new to Indesign, but have been using it for several months with no problems. I design our church bulletins and my youth group bulletins using it every week. I don't know what happened but I opened previous documents tonight and when I t
-
Flashing amber light, Airport wants to update, but I don't
The Airport works fine without the update. We have the flashing yellow light. Should we just ignore the update and the flashing yellow? (I'm afraid that the update will screw things up)