TS4062 I am getting error msg when trying to sync-iPhone could not sync because the sync session failed

I am trying to sync my iPhone and receiving the following message: iPhone could not sync because the sync session failed
I have tried walking through the set ups again, and cannot figure this out. Any help out there? Thank you.

I seemed to have figured it out...... I hard reset my Iphone and rebooted my computer and it seemed to work. It also seemed there was a music file that was not being recognized, I just erased it and everything worked fine after that.... very strange but I am so glad I figured it out.....

Similar Messages

HT201210 error message: itunes could not back up the iphone "..." because the backup session failed. I don't know what to do to fix this problem?

I keep receiving the error message: itunes could not back up the iphone "....." because the backup session failed. Can anyone advise me on what I can try doing to fix this problem?

This Apple article talks about backup issues -> iOS: Troubleshooting backup issues in iTunes
Are you able to backup if you move the previous backup from the location below to the desktop?
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Error converting image get error msg when trying to display thumbnail

Hi there
Me again
I am having some problems displaying thumbnails
I keep getting the error
Error converting image (create thumbnail). The "...........public_html/productimages/thumbnails/" folder has no write permissions.
So I go to my host and change write permissions on the files to 755 and try again and get the same msg
Then I contacted my host and changed the permissions to 777 and I went to the includes config file and changed the permissions to 777 too and still does not work
So I go to my cpanel and check all the files are set to 777 I make a new test page with a dynamic table and show thumbnail behavior and get the same error msgs
So I close DW restart and try again and get the same msg.......
So then I check the file permissions in the DW split screen window when connected to server..... I right click on some files on my server.... namely the 'thumbnails' file and check its permission and it is only set to 755 but in my host it is set to 777
So I try to change ppermissions from DW and get the
"setting access properties failed for: ' error
So what is the correct permissiion..... 755 or 777?
I have read two other posts on this forum and I still cant get to work
Does anyone have any ideas
I have used up all my options and most of my patience
I hope I can get this working asap....
Have a nice day

Try going through the steps in this document:
http://support.apple.com/kb/TS1539
CG

Getting error msg when trying to run 'weblogic.DDConverter', need help

I'm getting the following error when I try to run the 'weblogic.DDConverter' program to convert a deployment descriptor for an EAR file currently running under WLS 8.1 (that needs to be migrated to WLS 9.2):
[DDConverter] START Converting EAR CDMS.ear
Exception in thread "main" javax.xml.stream.FactoryConfigurationError: Provider
javax.xml.stream.XMLInputFactory could not be instantiated: java.lang.Instantiat
ionException
at javax.xml.stream.XMLInputFactory.newInstance(Unknown Source)
at weblogic.application.descriptor.BasicMunger2.<clinit>(BasicMunger2.ja
va:76)
at weblogic.application.ApplicationDescriptor$MyApplicationDescriptor.cr
eateXMLStreamReader(ApplicationDescriptor.java:433)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescr
iptorBean(AbstractDescriptorLoader2.java:369)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescrip
torBean(AbstractDescriptorLoader2.java:729)
at weblogic.application.ApplicationDescriptor.getApplicationDescriptor(A
pplicationDescriptor.java:277)
at weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.j
ava:66)
at weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:1
57)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177)
at weblogic.DDConverter.main(DDConverter.java:10)
Any ideas as to how to resolve this?
Edited by aroc725 at 09/25/2007 1:19 PM

Those slashes in the first line of the error message suggest to me that maybe you referred to a class incorrectly in your source code.

When I reboot my PC I get error msg: "procedure entry point SQlite3_wal-checkpoint could not be found..."

I had to uninstall prior version of iTunes to install IOS5 in my iPhone 4 (relatively new phone, only about 5 weeks old). It took several attempts to install IOS 5, and I finally succeeded only after disableing Kaspersky AV and the Windows Firewall. This, even though the iTunes connection diagnostics reported everything was OK, no errors and all green indicators. I had opened iTunes as Administrator too. So, now I have IOS 5 installed and running ok on the iPhone4, but I have a new problem on my PC that arose from all the different attempts to get this done. Here's more detail on the procedures and system changes I had made on my PC, and then what I get for the error msg.
1) As Instructed by an Apple rep, I UNINTSTALLED both iTunes and Quicktime. I then rebooted and ran iTunes in Admin mode, used the Connection diagnosis (reported all OK) and then tried to install IOS 5 on my iPhone4. The download (which would take between 30-45 minutes on each attempt) would fully complete and then I'd get an error msg of "server timeout". This led to further advice from Apple telling me to try the download again, this time with AV and Firewall disabled. So I rebooted again, disabled AV and Firewall and the IOS5 succeeded.
2) However, ever since I had removed both iTunes and Quicktime and reinstalled (only) iTunes (so far), each time I reboot my pc I get the following:
A Window opens with title: "Apple Sync Notifier exec Entry Point Not Found". Within the box below the title the following error msg appears: "The procedure entry point SQlite3_wal_checkpoint could not be located in the dynamic link library: SQlite3.dll"
I performed a search for SQlite3 in My Computer. It indeed shows up in a number of places, including within an Apple folder.
I'm using 64bit Win7 Home Premium SP1 on a PC with AMD Phenom II X4 945 Processor, 3 GHz with 8.00 GB RAM.
All iPhone and other applications seem to be behaving normally. I just have to hit "OK" to get rid of that annoying (new) error message that is apparently coming about during the PC startup process. It does NOT recur if I put the system in sleep mode, enter and exit iTunes, etc. It only occurs on reboot.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

HT201272 Keep getting error #499 when trying to download a song from an album I purchased that failed to download. Error message appears when trying to download from iTunes and the cloud. Re-starting the computer did not help.

I downloaded an album I purhcased a few days ago but one of the album's songs did not download. I received an error message, #499, for which I can get no explanation or interpretation of what error #499 even is (other than generic terms). All my efforts to re-start the download have failed. I've tried several times to download the file to no avail, tried the cloud service to no avail, and re-started the computer to no avail.
My main intention is to, of course, get the download completed. My secondary intention is to, hopefully, bring to the attention of Apple - iTunes staff, the grossly inadequate, dare I say cryptic, error message descriptions iTunes displays.
I can provide the purchase receipt number if it is required.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

I keep getting error 10053 when trying to update airport express and connecting to the existing wireless network. Please help.

can someone assist in setting up my airport express? Im not sure what the error message means...

Hello Jacquimae,
The only thing you can buy legitimately is the computer and the basic discs that are necessary to operate it. All Apple apps over and above this cannot be legally sold on. The machine should have been completely wiped and the original OS re-installed, bringing the machine to its original factory condition. iPhoto and Garage band were part of OS 10.6.8. Snow Leopard.
You must not use the original owner's ID.

I get error msg when trying to forward, or even when sending a message longer than a sentence or so.

I went to the provider web mail page and I can forward msgs from there. I just can't do it in Thunderbird. Someone suggested I empty my inbox but that didn't fix it.

I would suggest changing your anti virus program so it does not scan mail. It does not scan mail in the browser.

Get error msg when trying to sync music from iTunes to iPod.

Error states "The iPod "(my iPods name)" cannot be synced. The required disk cannot be found. All of my music is still on iTunes library but have lost all 3200+ songs on my iPod. Only music still on iPod is what I purschased. PLEASE HELP! Problem seemed to occur after newest update and also my son got a new iPod and we had been sharing a library since we like same music. his old iPod got deleted. don't know if that caused issue or not. ANY help is GREATLY appreciated!

Try going through the steps in this document:
http://support.apple.com/kb/TS1539
CG

Get error message when trying to synch iphone

I'm not sure why I keep getting an error message that says access denied, not authorized privelegdes or something when i try to synch my iphone to our new mac desktop.

Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

Error message when accessing iTunes Store: "iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again." Internet's fine! Please help!

Everytime I try to access the itTunes Store, this is the message I receive:
iTunes could not connect to the iTunes Store. The network connection timed out.
Make sure your network settings are correct and your network connection is active, then try again.
The internet connection is fine. I don't know how to fix this problem, and in the meantime I cannot connect at all to buy songs. Thanks for your help.

I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us.

Keep getting error 45054 when trying to download my purchases from cloud.

I keep getting error 45054 when trying to download my purchases from cloud.

Follow the instructions in this support article.

TS3694 I am getting 1015 error message when trying to restore iphone 3Gs

I am getting error message when trying to restore iphone 3gs

If this is your phone, it appears that you had either loaded the iOS 7 beta on it and it is now expired or you are not trying to restore the phone correctly. Did you attempt to update using something other than the standard procedure in iTunes? You cannot install a custom iOS file.

I keep getting Error 17 when trying to update to 7.0.4 iPad Air

I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Message was edited by: Texas Mac Man

Get error msg when opening iphoto from Photoshop: "Open iphoto 5 or later..

I get an error msg when trying to open a photo in iPhoto from Photoshop: "Open iPhoto 5 or later to see photos from your iPhoto Library in this list." ... but in info it says I have iPhoto '08.... I am confused.... what is iPhoto 5, and how is it different than iPhoto '08? I have not had this issue before today.... previously it was working fine.
Please email me when answered as it took me a while to find this forum and I'm afraid I won't be able to find it again.
Thanks,
<edited by host>

Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

TS4062 I am getting error msg when trying to sync-iPhone could not sync because the sync session failed

Similar Messages

Maybe you are looking for