TS4062 I keep getting the error message "apple outlook DAV has stopped working"
My phone and I pad all of the sudden just stopped syncing with my desktop. I have had my phone for over a year when 4s first came out and everything was syncing fine. Then all the sudden it stopped. I keep getting the error message "apple outlook DAV has stopped working". I have rebooted, checked for duplicates, signed in and out of the cloud and still nothing. Has anyone had this problem and know of a good way to handle it. Also, now my phone and Ipad don't sync with the cloud either. Please help.
Windows 7 Professional. I meant that when I open a word doc and want to turn it into a PDF, i get the same error message. In the mean time I paid the $40.00 and spoke to Adobe and after 40 minutes, they re-installed Reader X instead of XI so now it works but I am not overly thrilled that I had to pay for it.
Similar Messages
-
I keep getting an error message that Adobe reader has stopped working.
I have re-booted, I have un-installed and re-installed andI still can't open a PDF attachment nor can I change a Word doc into a PDF.
Windows 7 Professional. I meant that when I open a word doc and want to turn it into a PDF, i get the same error message. In the mean time I paid the $40.00 and spoke to Adobe and after 40 minutes, they re-installed Reader X instead of XI so now it works but I am not overly thrilled that I had to pay for it.
-
I keep getting the error message "apple application support is required to run itunes. Please uninstall itunes and then install it again." I've done this twice and still keep getting the same message...I'm at wits end Please HELP!!!
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I have a new iTouch. I'm having trouble downloading iTunes. I keep getting the error message: "Apple Application Software was not found. Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2." I have uninstalled and tried installing again and get the same error message. What do i need to do?
LgInstall 7-Zip (free), or a free trial of WinRAR, and use one of them to extract the contents of the iTunesSetup.exe or iTunesSetup64.exe installer file, then try installing AppleApplicationSupport.msi as a standalone component. Even if it won't install you may get a more useful error message as to why not.
tt2 -
I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Question:
I try to log into my itunes connect acct and I I still keep getting the error message
Apple ID does not have permission to access iTunes Connect.
please explain why?PS I have also read all of the old postings in regards to this and nothing is working.
-
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
When I try to load a film, I get an error message "Premier Eliments 12 has stopped working"
when I try to load a film, I get an error message "Premier Elements 12 has stopped working"
You'll need to get the specs for these videos and set up your Premiere Elements project accordingly. (MOV is just the package for the files. It tells you nothing of the video specs.)
Open the video files in the free download G Spot or Media Info and post to this forum the dimensions, frame rate and audio and video codecs listed. -
I just bought the new Iphone 5 and i cant get itunes to download, I keep getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start.Verify that you have sufficient privileges to start system services.
I have no idea what that mean my iPhone connects to my computer and charges and i can import pictures it just iTunes that won't work.
PLEASE I NEED HELP FROM ANYONE WHO KNOWS ANYTHING!!!!!!!!!!!!!!!!!!!Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
I have just upgraded from Windows XP to Windows 7 and then reinstalled CS4 (purchased a couple of years back and paid for) then input the unique code number. Now I get an error msg that says "Licencing has stopped working". What do I need to do?
Hello Carole,
Please try the steps mentioned in the link below:
Error "Licensing has stopped working" | Windows
Thanks
Alisha -
Why do I keep getting an error message that my contacts have stopped working
Sometimes, I am getting an error message that says that my contacts have quit working. Also sometimes I can't use my phone because the same error message appears when I tap the phone icon.
Turning the phone off and on again sometimes helps, other times not.
I tried a reboot, but that did not seem to make any difference.
Help? Ideas?
Thanks!I have a similar experience with getting the message that my contacts have stopped. Here is my experience in resolving the issue.
1. Phone: Motorola RAZR MAXX HD 24 GB of 32 GB free.
2. OS; Android 4.4.2
3. Message "Unfortunately, contacts has stopped"
4. Possible cause: Contacts stops working when either Verizon Cloud or Backup Assistant try to synchronize with their respective online storage systems. Also, neither APP managed to properly identify all my contacts. Cloud only backed up 13 of over 600 contacts. Backup Assistant Plus only backup up 360 of over 600 contacts.
5. Resolution: I disabled both APPs after clearing their respective cache and data. Then I cleared the data and cache for Contacts. Assuming your have a Gmail account for your Android device, Google will repopulate your contacts from the web based email account. So, nothing is lost and no damage is done. This was my experience.
6. Lesson learned: On my phone, and perhaps others, the Cloud and Backup Assistant are corrupted, or have bugs, and produce errors which interfere with the operation of Contacts when they try to synchronize, even imperfectly. Clearing the data from Contacts, and disabling the two Verizon APPS, resulted in restoration of the Contacts function.
7. Verizon's response: Verizon technical support pronounced itself mystified by the information presented here. So far, after two days, they have not responded with either a diagnosis or a fix.
8. My Expectations: I don't really expect Verizon to do anything at this point. I do have working contacts, and they are preserved via my Gmail account, so I have a working solution. It just doesn't involve Verizon software. -
Why does my Apple TV keep giving me the message "Apple TV cannot connect to the server" when I try and rent a movie to watch?
Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario -
I keep getting an error message "spooler Sub System App stopped working and was closed"
hp photosmart c3150 all-in-one
windows vista 32-bit
"spooler Sub System App stopped working and was closed"
not sure of any changes. I did reinstall the printer 3 timesRunning the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
How do I stop this? I have lost a LOT of work...
c,
It may be a range of different things, I am afraid.
You may try the list, unless someone comes up with something brighter.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible), for CS3 - CC you may find the folder here:
https://helpx.adobe.com/illustrator/kb/preference-file-location-illustrator.html
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Maybe you are looking for
-
Permissions on an external hard drive
Can someone PLEASE help. I have two external hard drives that when I plug into my MacBook come up as read only. I have tried to use the Get Info and change the Ownership & Permissions settings, but there is no options, it just tells me I can read onl
-
How to skip aggregated Datastrings before the Intersection Report launched.
Hi there, We are facing a issue during our monthly upload process, that is causing us to switch all the time the "Enable Intersection Validation" trigger. Example: We have two different Import DataStrings that are imported (different Accounts). The a
-
Hi All, I have been testing various programs through my HTC Desire HD android handset for stability etc with my infinity connection. When running the speedtest.net app on my handset it tops out at about 5meg down. It will quite happily give the full
-
Error when calling create and update functions on logical data service
Hi There, I receive the following error when trying to call the createCustomerDetailResponse method from our dataservice. Note that the operation referenced in the error is createCustomerDetail rather than the actual method name 'createCustomerDetail
-
In my "photos" tab, it says I have 10,000 photos at the top right. But when I look down at the number of photos next to each event the number is far less, like 5,000. When I click on an event, it show that there are far more photos in there than it