TS4062 ipad frozen, tried reset from rec. mode, usb cable showing on screen, waiting for ipad, then ipad fails to respond. what can i do?

ipad mini froze when charging, have tried all restore options, when i get to waiting for ipad in itunes when restoring in recovery mode the usb cable disappears from the screen, the apple logo appears then the recovery line beneath logo, then there is no further response from ipad. have been trying to resolve this issue for couple days now very frustrated. can anyone help please?

Use the charger that came with the iPad or a name brand charger of equal or greater capacity. Plug that into a known good wall outlet. Then wait at least an hour. While the iPad is still plugged in to the charger reset your iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If the iPad restarts continue to charge it until the battery is at 100%
If the iPad does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Similar Messages

My iPad s frozen with only iTunes icon and usb cable showing and cannot access anyhting. Can anyone help? - Apple won't

Since receiving a iOS software update (6.1.2) my iPad has frozen and only the iTunes icon and a usb cable show on screen. I am unable to access any App. Can anyone help or point me in the right direction. this was raised with Apple and ticket number advised on 3rd March but not a word from Apple since.
Thank you

Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Forgot password on ipad air, cant reset with itunes because it keeps say i need to log in and make a confirmation so what can i do

forgot password on ipad air and cant sync with itunes what can i do ?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

My compurter doesn't recognize my iPod Nano 2g A1199 i tried reseting it, disk mode, but nothing. I reinstaled iTunes like 5 times and still Windows doesn't recognize it.

Hello Fercho1998,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device connectivity issues:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

I think I have the same problem. The whole sequence is:
* Put MacBook Pro to sleep by closing lid.
* After some period of time that varies, I notice sleep LED is no longer pulsing.
* The case is VERY hot.
* When I open the lid, the display stays black.
* No sequence of keys or closing/opening lid wakes display.
* Only way to recover is to power cycle.
* Problem is VERY intermittant -- I do not know how to reproduce it at will. AppleCare service had it for a whole week and couldn't reproduce it, whereas for me it occurs once every 1 or 2 days.
Actions:
* AppleCare service replaced the main logic board in early June, but it didn't help.
* I did a clean erase and install, but it didn't help.
* AppleCare service had the unit for a full week in July and couldn't reproduce the problem, so they returned it and it still had the problem.
I have a Logitech Bluetooth mouse, don't know model other than M-RBB93. I'll UNset "Allow Bluetooth to wake..." and will also turn off the bluetooth mouse before closing lid. I'll post my results.
Meanwhile, please let me know if anyone determines a solution!

I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

I have a WiFi home connection. It works on my laptop but has stopped working on my iPad, which I tried resetting but it didn't help. It recognises the SSID but then asks for IP Address, Subnet Mask, Router etc. Any ideas on what to do?.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic. Tried holding button and replugging USB cable, but did not fix it.

Hi
Chamie7 wrote:
Recently did upgrade from OS 10.6.8 and to Mainstage 2.2.2 and have lost lights on my Gio pedal only in Mainstage - still have them with Logic.
I presume that you mean that the switches do not light up as appropriate when you select a Patch in MS?
If so, in Layout Mode, select each of the buttons in turn, and check that they are a) Assigned to the correct MIDI CC number etc, and b) that "Send Value to" has the correct Port selected.
CCT

My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero

My zero Key isn't working after waking from sleep mode. This is a real problem for me because my password contains a zero. I don't recall spilling anything or jamming it just that it worked before I closed the computer and wasn't after I woke it up.
I would like to fix the key but if that's not possible right away , Is there a way to reset my password without being able to type with a key thats in it?

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

I just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?

The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad

My iPhone 3gs has frozen after trying to update to 5.0.1 and will not turn on or off. Only showing the iTunes logo and the usb cable on the screen. What can I do to fix this?

My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?

Here are Apple Steps: http://support.apple.com/kb/HT1808

I upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

i upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

http://support.apple.com/kb/ht1808

HT4796 I´m trying to migrate from my old PC to my mac, but in the migration assistance of my PC, the legend "waiting for your mac to connect" continues ever for ever, never appears the passcode. What can I do?

I´m trying to migrate from my old PC to my mac, but in the migration assistance of my PC, the legend "waiting for your mac to connect" continues ever for ever, never appears the passcode. What can I do?

The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

HT4623 Trying to down load the latest update to my iphone 4 but my phone is now frozen with a picture of a USB cable visible and an arrow pointing towards itunes. Please help?

Trying to down the latest update to my iphone 4s but my phone is now frozen with a picture of a USB cable visible and an arrow pointing to itunes. This remain whether my phone is connected to itunes or not. Any help please?

Hi d_diotte,
Thanks for using Apple Support Communities. If you're unable to update your iPhone and keep seeing the "Connect to iTunes" image, this article has some steps you can try:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari

I turned my Ipad off and when I tried to turn it back on, only the apple displays and it will not go past that. What can I do to get it to come back on? It won't acknowledge it when I plug it in either.

I turned my Ipad off and when I tried to turn it back on, only the apple displays and it will not go past that. What can I do to get it to come back on? It won't acknowledge it when I plug it in either.

I'm glad it solved your problem

TS4062 ipad frozen, tried reset from rec. mode, usb cable showing on screen, waiting for ipad, then ipad fails to respond. what can i do?

Similar Messages

Maybe you are looking for