TS4062 ipod classic issues when trying to sync with itunes

i have an ipod classic which has always worked great when getting music from itunes, but i bought a new computer and now i can't get it to sync. i also have an ipod touch which works fine. i need help figuring out how to sync with my new computer and the classis. any suggestions?

Update:
Any new news on this issue from anyone else?
I left my iPod plugged into my PowerBook over night and when I woke it was functional. However, downloads from iTunes to the iPod take almost 3x's longer than they used to and there seems to be more errors than I've ever experienced (about 1 out of every 10 interfaces). Sometimes the error is that it can't write to the drive (iPod) and sometimes the error is that it can't mount the iPod. Also when the iPod is plugged in and displayed in iTunes, the "used" and "free" info is incorrect. I completely emptied my iPod and it says that I'm using -2.80 GB (impossible unless I've created a blackhole) and it says that I have 10.49 GB (capacity, under Get Info, is listed at 9.28 - which is were it's always been - it's a gen2 10GB iPod).
Has anyone tried to format there iPod? Is this possible without harming the drive?
Well, to sum it up my iPod is working but is having errors and bugs all over the place. If anyone has any new news I'd love to hear it.
SPECS: iPod 10GB gen2, running 1.5(?), iTunes 6.0.4, PowerBook G4 800, OS 10.4.5
Thanks

Similar Messages

  • HT1222 my ipod reads error when trying to sync with itunes

    my ipod reads error when trying to sync to my itunes

    Hello, TheHelper1964.
    Thank you for the question.  There could be multiple causes to the errors that you are receiving.  I have included a couple articles that will help you troubleshoot this issue. 
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
    http://support.apple.com/kb/TS2690
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/TS2529
    If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com. 
    Hope this helps,
    Jason H. 

  • What is error 4002 when trying to sync with Itunes match and how do I fix it?

    What is error 4002 when trying to sync with Itunes match and how do I fix it?

    HI
    Read this How to troubleshoot iTunes Match - Apple Support
    Note specifically holding option ket whilst turning off match.
    Jim

  • IPhone 4s reboots many times when trying to sync with iTunes

    iPhone 4s reboots many times when trying to sync with iTunes.
    Since IOS 8, my iPhone 4s reboots many times when trying to sync with iTunes on my Mac. It will start running the backup and reboot, it will reboot many times when updating packages. It can take 12 hours to finish a sync with the mac. The phone gets hot during this. I keep deleting more and more pictures and apps, hoping that maybe it doesn't have enough space, but iTunes shows I have 4.9 Gbytes free, which I think should be enough.  I am on IOS 8.0.2, I thought maybe I would try to upgrade to the latest IOS today, but I am worried that I will end up with a non working phone.
    Is anyone else having these problems?
    Ed

    Well thats Od... I have never experienced that problem.. Maybe you should try to backup your phone and then wipe it by going to Settings<General<Reset

  • My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter

    My NEW iPod Classic 160GB (2013) does not sync with iTunes on my PC Windows 7 Starter. I have like 1975 songs and some videos, but also somtimes the PC does not recognize it, sometimes it does, either ways I can't get my music in the ipod.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • HT4539 My 3g iphone has lost all data when trying to sync with itunes, put icloud for ipad and iphone but didnt allow to sync with computor as not very techy!Thought if messed up it wouldnt effect computor! Now Phone not responding to icloud to collect da

    My iphone has lost all data when trying to sync with my computor.
    I have an pad with most info on, but not keen to sync with that incase that data gets lost!
    I joined icloud but cannot retreive from there as its not accepting my icloud account! Help!
    If I sync phone with ipad is it likely to work safely to retrieve info as both are apple devices?.

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

  • Ipod classic says when trying to sync, Problems with this drive. Scan the drive and fix it ...what do i have to do?

    When trying to sync my ipod classic I get an error message " owners IPO (I)...Problems with this drive..Scan the drive and fix it now.....How am i supposed to scan the drive and fix it?

    Hi chiefdon,
    If you are having syncing and possibly disk issues with your iPod classic, you may find the steps outlined in the following Troubleshooting Assistant helpful:
    Apple Support: iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    - Brenden

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Error message when trying to Sync with itunes

    Hi
    I seem to get error messages when I try to sync with itunes. I have the iphone 3G. Also all my music and videos seem to have carried across, all except one, it's very odd. Latest error message reads:
    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    I have also an error message saying it cannot sync and error message number 0050.
    Any clues?

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

  • Ipod classic freezes when trying to sync photos

    Hi
    My Ipod classic has started to freeze every time I try to sync with my PC when adding new photos.
    This is something I have done many times before without any problems but as of yesterday, every time I try it just stops dead.
    As I type this message, my ipod screen just says connected and the itunes screen says syncing ipod do not disconnect but it's been like this for 2 hours now with nothing to show for it.
    Syncing of music and videos works fine I hasten to add.
    Not sure if it's relevant but yesterday I updated itunes to 7.7.1.11
    Any suggestions would be greatfully recieved
    Mark

    Hello everyone. I'm new to Apple forums and don't know how to start a new thread! My problem is this: All my photos are on a Seagate External Hard Drive (there are about 3,500 of them) and I want to transfer them to my iPod. I've told iTunes where to find the photos on the EHD, but it just won't load them. I've got the Do not Disconnect message up, and have done for several hours - but no photos. I then tried loading a few hundred photos that I happened to have on the C drive, and that went fine and they loaded no problem. Why can't it load the ones on the EHD? I did it once before and it was fine, so I'm pretty certain I'm not being thick!
    Any advice gratefully received. I don't really want to put all my pics back on the C drive as I haven't got that much room left - hence the need for the EHD!
    Thanks in advance...

  • IPod freezes when trying to sync with iTunes 6.0.4(3)!

    Is anyone else having this problem?? My iPod (touch wheel) was working just fine until I updated iTunes the other night. Now it freezes when I try to sync it with iTunes! I tried resetting, restoring, checked all the updates, *****-slapping the iPod, everything. I see that others might be having the same problem -- is there a solution? Help!
    iMAC   Mac OS X (10.4.3)  

    Update:
    Any new news on this issue from anyone else?
    I left my iPod plugged into my PowerBook over night and when I woke it was functional. However, downloads from iTunes to the iPod take almost 3x's longer than they used to and there seems to be more errors than I've ever experienced (about 1 out of every 10 interfaces). Sometimes the error is that it can't write to the drive (iPod) and sometimes the error is that it can't mount the iPod. Also when the iPod is plugged in and displayed in iTunes, the "used" and "free" info is incorrect. I completely emptied my iPod and it says that I'm using -2.80 GB (impossible unless I've created a blackhole) and it says that I have 10.49 GB (capacity, under Get Info, is listed at 9.28 - which is were it's always been - it's a gen2 10GB iPod).
    Has anyone tried to format there iPod? Is this possible without harming the drive?
    Well, to sum it up my iPod is working but is having errors and bugs all over the place. If anyone has any new news I'd love to hear it.
    SPECS: iPod 10GB gen2, running 1.5(?), iTunes 6.0.4, PowerBook G4 800, OS 10.4.5
    Thanks

  • HT1414 I have an ITouch about a year old that has never been used. When trying to sync with Itunes, get message: The IPod ITouch could not be restored. An unknown error occurred (-1). I have tried 2 different computers with same result. IPod was reset def

    Itouch was reset to factory defaults. Have tried ideas listed in ITunes help. Any ideas?

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • TS4062 new iphone lists wrong phone number when trying to sync with itunes

    I received my new iphone 4s in the mail and when I try adding it to my itunes for syncing the wrong phone number shows up. The phone works and the number is correct but the one Itunes recognizes is a different number.

    I received the phone by mail. I had ATT activate it with my old phone number I had on a blackberry. Everything works fine. The number under settings>phone> my number is the correct phone number.
    It's when I try to add this phone to Itunes with a USB cable,  itunes recognizes a different number. So i'm guessing the sim came with that number and when ATT activated the phone with my correct number, that this number is still in the phone memory somehow.
    At ATT they say the phone is fine. My new number is recognized and works properly. It's just that when adding it to my itunes the new number is not recognized on the initial setup screen.
    I'm not even sure this matters but itunes recognizes this phone with a different number than the one that works.

  • Error message, 0xE8000065 when trying to sync with iTunes. HELP!!!

    I bought a new iPhone 4S, but when I try to connect it to iTunes, I get an error message, 0xE8000065, or sometimes 0xE800001. I want to sync it but nothing I've tried (restarting the services, restarting the machine, reinstalling iTunes, erasing lockdown folder) works. Can anyone help me?
    P.S. I saw a video in youtube explaining how to try to connect it using recovery mode, and iTunes did in fact detect the iPhone and asked me to update and restore. I did not want to as I already have some apps and pics but I went through it anyway. Since it was taking a LONG time, I went to get something to eat: when I came back, the iPhone had not been restored, and it still wouldn't connect to iTunes. I'm guessing the restore/update failed? In any case, how can I fix this issue?

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

  • When trying to sync with itunes error message reads Apple mobile device not started.  I pod turns on but does not connect to itunes

    When I try to sync my ipod with itunes I get an error message which tells me Apple mobile device is not started.

    "itunes could not connect with the itunes store. An unknown error occurred (11556)."
    This error is associated with ringtones, are you trying to sync a ringtone, purchase a ringtone...need more info...
    I have also an error message saying it cannot sync and error message number 0050.
    Are you on Windows XP? Is this the error message...iTunes displays -50 error message? If so, follow these directions:
    http://support.apple.com/kb/TS1539

Maybe you are looking for

  • HP Officejet Pro 8600 - getting connected to HP ePrint

    Had quite a time setting up my new printer.  In all the confusion I failed to sign in to eprintcenter.com and use my printer code which was only valid for 24 hours from time page was printed with this info.  Thus, I have not been able to use my ePrin

  • Java Session problem while sending mail(using javamail) using Pl/SQL

    Hello ... i am using Java stored procedure to send mail. but i'm getting java session problem. means only once i can execute that procedure pls any help.

  • Best way to apply Support Packages to Solution Manager

    We have a single instance dual stack for SOLMAN 4 running. I want to apply Suppot packages, I need some suggestion what would be the best way to do this, the way I am thinking to proceed for this is - 1. Do kernel and igs upgrade thru JSPM 2. Apply A

  • Xml name space for generated types

    By default the autotype or the servicegen ant task seem to be creating a namespace from the java package name (like java:com.ventaso.external.common) for xml mapping of user defined java classes. Is there a way to change this to name space I want ? S

  • 10.6 update disables full duplex ethernet

    Updated to 10.6 and immediately lost all internet connectivity. Network control panel reported "Cable Unplugged." Restarted in 10.5.8 -- 100Mb connection worked fine. Restarted again and back in 10.6, I fiddled with settings and found that by manuall