TS4062 when i connect my new ipad to my computer and open itunes - it's telling me that the device can not open IPAD because it needs Itunes version 10.5 - but i can't seem to find out or download the newest version of itunes on my ipad. Any ideas?
My computer is not reading my new IPAD in ITunes. It's saying i need itunes, 10.5 or higher - but i can't seem to update my itunes on the IPAD - any ideas?
10.5 is NOT software for your ipad. It is the itunes software for your computer.
Similar Messages
-
I purchased an external CD drive for my MacBook,the internaldrive had died. When I tried using the new drive I got the following msg "The attempt to burn a disc failed. The device is not accessable, probably because it was removed" I contacted OWC and tried to work the issue with them, we gave up and OWC sent me a replacement. I connected the replacement and am getting the same message. Any thoughts?
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.
Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa -
I can not download 19 songs that I recently purchased on my laptop. I am getting the message that my Nano is not an authorized device. Even though I have had it for years and it has many songs downloaded from my laptop. I even decided to do the restore and it is still saying that the 19 songs can not be downloaded to my nano. I did recently upgrade my window's 7 version. Maybe this has created the problem.
Yes, the upgrade is the likely cause.
First you should try to deauthorize your computer/iTunes library before attempting to authorize it again. To do this, click the Store drop down menu in iTunes and choose Deauthorize this Computer. Then enter in your iTunes account credentials.
When it has finished, choose Store -> Authorize this Computer and again enter in your Apple ID account credentials.
Finally, try resyncing your Nano to see if that makes a difference.
B-rock -
Some clot got my wfe an iphone for her 70th birthday. I have spent hours trying to sync it to my computer for emails. I get one message saying that my user name or password are incorrect and another saying that The POP account is already configured'. Before I convince my wife to return it to the shop, can any one give me advice please?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
My new iTunes account that I created for work keeps telling me that my email address is not yet verified. So I send a verification email to my main (another) email address, and then when I get a verification email to that address, it says that my email address is already verified.
You can resend the verification email by going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address.
-
Itunes on my Mac Mini [Version 10.5.8] says that I can not use my iPod because it is not up to date and needs 10.6.3. My iPod says it is up to date with 6.0.1, same as iTunes. Help, please.
Click here.
(72668) -
What settings need to be changed in order to print in Adobe Reader?
Thank you for your kind and thoughtful input.
My Adobe reader is the most current one that's out there per Adobe.
Something like XII or higher.
As for my Outlook, it's MS Outlook 2003, and I believe it's Express Outlook.
If I disable the Protected Mode, per your suggestion, maybe that will work.
I'll try it.
Thanks again, and if you have any other ideas, I would appreciate your
thoughts.
Thank you.
Joel -
I have been using Firefox for years with Hotmail as my e-mail provider with no trouble. Now I am getting messages that say some script is running; do I want to continue or cancel and then a brown message bar will appear asking me me manually allow the opening of Hotmail. A minor annoyance yet one I have not encountered until a few months ago and would like to fix.
See: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* [[Options window - Advanced panel#General_tab]]
See also: http://kb.mozillazine.org/accessibility.blockautorefresh
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Can not get a calandar in EVA website to book flights but I can in IE
The calendar to book flights does not show up in Firefox. It does show up in IE.
Those calendar icons are generated by JavaScript and only show if navigator.appName != "Netscape".<br />
So for IE (Microsoft Internet Explorer) they will show, but not for Firefox ("NetScape"), although they do seem to work if I set navigator.appName to Microsoft Internet Explorer.
<pre><nowiki><script language="JavaScript">
<!-- if (navigator.appName != "Netscape") {
document.write ("<img src=\"/globalimage/b2c/button/calendar.gif\" align=\"absmiddle\" onMouseUp=\"window.open('/html/b2c/utility/calendar/calendar.asp?3', 'cal', 'location=no,menubar=no,status=no,titlebar=no,height=160,width=480,left=400,top=250')\">");
//<!--P1310M0384-->-->
</script></nowiki></pre> -
I want to get this app SO BAD but the App Store says I do not have enough space but my settings say I do have enough space what do I do
Thanks but one last thing I have deleted EVERYTHING except for 17 photos 64 songs and an app that is 1.4 GB my iPod holds 5.0 GB and it says it is useing 3.4 GB BUT THAT IS A LIE what do I do because I can't get the app and very thing I have on the iPod touch I absolutely need
-
Today when trying to download new songs to my Ipod touch a message popped up stating that my Ipod can not be used because I need to update the software to 10.6.3 and to go www.itunes.com. I cant find where to update my Ipod touch to the version on the website. HELP!!!
I suspect you have a Mac with OSX 10.5.8. If so see:
ios 6 and macosx 10.5 on a pre intel...: Apple Support Communities
Otherwise what OS and version do yo have?
What version of iTunes do you have? -
Four days ago the lock screen and keyboard sounds quit working, but was able to reset the settings. Two days ago I had to do this and turn off the device and then restart it to get the sounds back. Today they suddenly went out and I can't get them working again. The settings are correct and the device is not muted. My OS is up to date. What else can I do to get the sound back?
Hi there,
I would recommend taking a look at some of the troubleshooting stepd found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W. -
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
I have made a calendar in iCal on my MacBook Pro, but I cannot seem to find out how I can 'download' that same calendar on my iPhone and iPad. Does anyone know how to do this? Thanks in advance.
-
I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please
Double tap the Home button and swipe the app preview page up
iOS 7 also allows apps to run while they aren't open.
You can manage these here:
Settings > General > Background App Refresh
Maybe you are looking for
-
Afficher les metadonnees dans un diaporama "galerie flash lightroom"
Bonjour, Je viens de créer un diaporama dans Adobe Photoshop CS5 Extended, par Bridge, avec le choix de modèle "galerie flash lightroom", avec comme aspect l'option défilement. C'est nickel, sauf que je n'arrive pas à afficher les métadonnées liées
-
"Conflict Detected" and/or "Changed on Disk" immediately after saving
My setup: I've got a workstation and a laptop (Win 7 x64) that I use Lightroom 4.1 on both. When files are imported, they are saved to a Windows 2008 (x64) server that I have so that I can work from either machine. Everything is connected via gigab
-
Text Format Report to Dot Matrix Printer
Hi, I would like to know how do I output my reports to dot matrix printer. In this way I need to output the report from Report Server (in text format) and send it to the dot matrix printer. If I send the report in PDF or JSP format, then the printing
-
Re: Complaint over poor customer service - Broadb...
i ve ordered my bt infinity on 19th march and gave my mac code to bt on 21or 22 nd of march and told that engineer will be at my address on 29th.. i was happy.unfortunatly noone turned up on 29th and i phoned bt.. first person i talked to said that i
-
Help discovering the queries in the database
hi, I have a doubt about oracle. Is there a way to find the SQL of all the select statements, I was using v$_sqlarea, but it doesn't show me all the parameters of the query, some fields of the where clauses are with the value '?' Is there any kind of