TS4062 When I try to sync my phone using WiFi, I get a message that "Sync will resume when "****PC" (a computer I used previously and no longer have) is available." I cannot get past this. It says my last sync was months ago, despite the fact that I hav
When I try to sync my phone using WiFi, it will not sync and the following message is displayed: "Sync will resume when "*****" (my old computer I no longer have) is available." I have synced several times on my new computer using the USB cable, but the message also gives the date of the last sync months ago, when I had the old computer. Any ideas?
I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.
Similar Messages
-
I've been paying for Adobe Premiere pro for the past three month and today, despite the fact that i have paid already for the upcoming month, i cannot access it because of an "intenet connexion problem". But I'm connected and I have the right ID. What should I do?
Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer -
I have been able to upload videos to vimeo from FCPX in the past. However, now FC gives me a message that my password is incorrect. This is despite the fact that my password allows me to sign into the Vimeo website. I have reset my vimeo password, restarted final cut and restarted my computer. Any ideas?
Log in to Vimeo and change your password on the Vimeo site. Then update your FCPX settings for Vimeo to reflect the new password.
I think Vimeo required this in light of the Heartbleed hack. -
When i open my Canon RAW-files with preview or transfer them to another program using preview they change to color despite the fact that they where all shot in B/W... How to change this?
I shoot only RAW - no JPEG-files except those visualizing the files on my memorycard or computer. I think i have to refine my question;
1. I know there is possible to make B/W HDR-images.
2. I know the best HDR images are based on RAW-files.
3. When i transfer the images in question to a HDR software they change, so when i view them in the software (either Preview or the HDR software) they are suddenly viewed (and processed) in color.
4. This never happend on my PC so i know it has to do with either Finder or Preview.
5. Do i have to make all my B/W HDR-images on the PC or is it a way for me to change how Finder/Preview show/alter my images? -
Consider this code:
header.h:
#include <iostream>
class A{
int i;
public:
A() : i(101) {}
void print();
void g(A&);
cpp1:
#include "header.h"
inline void A::print() { std::cout << i << '\n'; }
int main()
A a;
a.print();
g(a);
cpp2:
#include "header.h"
void g(A& a) { a.print(); }
Note that the member function A::print is defined outside its class with the specifier inline. The code executes normally in VS2014, despite the fact that the member function is odr-used in cpp2, but it is not defined in this file.
I found the following quotes from the C++11 Standard:
9.3/3:
An inline member function (whether static or non-static) may also be defined outside of its class definition provided either its declaration in the class definition or its definition outside of the class definition declares the function as inline.
3.2/3:
An inline function shall be defined in every translation unit in which it is odr-used.
7.1.2/4:
An inline function shall be defined in every translation unit in which it is odr-used and shall have exactly the same definition in every case.
The two last quotes above don't speak exactly about a member function but I believe they should be applied in this case too, as the inline specifier is a hint for the compiler to expand the function inline at the point of call. If we assume the compiler
does this inline expansion, how does it know the definition of the member function, while compiling the cpp2 file?On 12/31/2014 12:13 PM, Belloc wrote:
C++ is supported on many different systems, with tools provided by many different vendors. Microsoft's linker happens to be pretty smart about merging identical blocks of code. Other toolchains may use linkers that weren't designed with this in mind,
and that would choke on multiple definitions of the same symbol. The C++ standard is written so that it's actually implementable, on as many platforms as possible.
Frankly I don't understand your statement above. What would be the difficulty for any compiler*that is already compliant with 3.2/3 and 7.1.2/4*, to adapt its code, so that each call to an inline function in a TU, which doesn't carry the function
definition, is simply not inlined?
That's the easy part. The "there's identical function definition in every .obj file, and the linker is expected to merge them all together" is the hard part. Normally, if you define a regular (non-inline) function in more than one source
file, you get a linker error. Microsoft's linker has a special way to mark "defined more than once, just pick any copy" block of code (see __declspec(selectany) ). Other linkers may not.
Igor Tandetnik -
When attempting to convert pdf to word doc, I continually get "An error occurred while signing in" despite the fact that I'm already signed in. Please help if you can?
Hi lorrelaws,
Do you receive that error when you try to sign in via Reader? If so, try signing in via the web interface. Did that do the trick?
Let us know how it goes.
Best,
Sara -
w3c valid site, initially no error reported by developer toolbar. But upon right click (giving the validation menue), the the toolbar reports two errors: width and height. Despite the fact that every page is validated! On the forum for the toolbar, this is said to be a Browser error. So, how can this be fixed? I'm using FF 3.6.6
== This happened ==
Every time Firefox opened
== after update from 3.5?Hi Sara,
Can you give us the URL of the page you're having problems with and of the forum thread you mentioned?
Thanks! -
iTunes won't download on my Windows after the internet crashed from me trying to download it the first time. I have an iPod touch and I feel iTunes is the proper application to use on such a product. I really need help.
Try:
Issues installing iTunes or QuickTime for Windows -
when I used my friends laptop and her iTunes my phone restored and now it says "Dana's IPhone" which is my friends name, how do I change this??
You're welcome! No worries. haha
-Mitchell -
latest version has been added ... does not fire up...
using windows 7 service pack 1Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Need a bit of help! I've just downloaded the trial version of Indesign CC, and after waiting ages for it to install it's telling me my trial has already expired when I haven't even managed to open Indesign. I've tried logging in/out, reinstalling both Creative Cloud CC and Indesign itself (and restarting my laptop), and also have tried the Creative Cloud Cleanup tool but to no avail! I have paid for versions of Photoshop & Premiere Elements...maybe that's interfering with the trial? :/
great! well unless my antivirus is interfering with it, I haven't done any of those things....I've never used it this is the first time.... I can't even just buy Indesign, because of this creative cloud nonsense wanting to charge ridiculous amounts per month! Looks like I'll be forking out for the bus instead and using the computers on campus...Thanks anyway!
-
# Question
I cannot install flash player plugin. It gives me the error message that this is not the latest ver of flash player and directs me to the latest ver download but it's the same ver.Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
You can use this manual download link:
*http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller -
Need it on both Mac and PC. I use it with my old computer running Firefox 3.6.8 just fine but installed the addon before upgrading to 3.6.8. Additionally, I know other people who are running Firefox 3.6.8 + Firefly without a problem. I uninstalled Firefox and installed the oldest version I could find (3.5) and tried to add it that version but had the same problem. I disabled all other extensions but still no luck. Thanks so much!
Hello there.
If the add-on is incompatible with your current version, you need to contact its author and ask him to update his add-on.
There is a way, however, to force compatibility on all add-ons. See this:
http://kb.mozillazine.org/Extensions.checkCompatibility
If you have any questions about the process, just ask. -
In the actual game center app, when i click on the "games" tab, nothing displays. It should display my games and achievements- however, it doesn't. Any advice or help?
Yeah, it seems to be a problem. I've been runing about trying to solve it until I found your posts. See mine here:
https://discussions.apple.com/thread/3938126?tstart=0
and here are some more people reporting the same thing
https://discussions.apple.com/message/18376511#18376511 -
Not really any more to say
Either of the two styles should give you what you want, install the "Stylish" extension first.
* Stylish :: Add-ons for Firefox<br>https://addons.mozilla.org/firefox/addon/stylish/
* Red: Mark visited links as read on unruly domains<br>http://userstyles.org/styles/16842/
* Red:visited -- Mark visited links Red (*DM) <br>http://userstyles.org/styles/17357/
Maybe you are looking for
-
To get Footer Displayed for Dunning Letter Report
Hi All There is a requirement to Add footer to display at bottom of page in Oracle reports with Customer Number, And Sum of Transaction Amount for Dunning Letter. Would need some hint towards fixing this Can we get this requirement using Dunning Lett
-
Screen refresh problem with Windows 7
Hello all, I've recently begun testing Oracle with Windows 7 on a new HP 2540p notebook computer. I've encountered a very strange issue so far. After logging into Oracle, and Windows switches to Windows Basic theme, I should be taken to the main Navi
-
Problem using/opening Aperture 3.0 Library in Aperture 3.5.1
I have Aperture 3.0 Library that I opened in Aperture 3.5.1 and got this: I did all repairs and rebuilds, but noting works. I can't access any PS file that I have, and the exports from the library looks like this: Any suggestions how to save my image
-
Tranport Request from Higher version to Lower Version
Hello, Can any One Know how to Transport Requests from Higher Version to Lower Version for Example From Ecc6.0 Ehp1 to->>>>> Ecc6.0. is there is any way or any SAP Note related to this? Ple
-
Printing fails, says low toner on old Laserjet
Under Fedora 15, Firefox will not print to HP Laserjet 6MP connected to JetDirect EX Plus3. It says low toner. Other programs print successfully, CUPS control panel also says no toner left. However I believe this 12 year old printer/jetdirect combo h