TS4079 Siri is not picking up my voice and Siri is not talking back after ios7 upgrade. .?

I have tried to use Siri after upgrading to ios7 and now the ring just spins with suggestions of what to ask , but Siri does not pick up my voice and Siri does not speak back.
I have internet connection , I have done a phone reset etc etc , it was working fine before the upgrade , any ideas please.?
Also have the language set to uk english ..
Upgrade to iPad 4 worked fine , just the phone. (Iphone5)

ok, got the same problem! here is what i tried and found out:
ok, now i tried again a factory reset and it didn't help...
Also tried a reset with restoring from an icloud backup! Didn't help...
Switching Siri off an on, didn't help
Switching off Siri and reseting the iPhone (holding down the power- and the homebutton till Apple logo) and then switching back on, didn't help...
Using Siri with the headset, working!
Using raise to speak option working also! So only the Homebutton activation does not work!
Called the support, the answer is: Buy a 35 € protection plan or help yourself...

Similar Messages

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Korean input keyboard not correct typing after ios7 upgrade at iPhone and iPad.

korean input keyboard not correct typing at page after ios7 upgrade at my iPhone and iPad.

Report this to Apple via
http://www.apple.com/feedback

TS4079 siri isn't talking back

yesterday siri wasn't working on my iphone 4, wasn't picking up my voice
today - it's picking up my voice but won't talk back

Try restarting your iPhone.
If that doesn't do it, this might help ya out -> iPhone 4S: Troubleshooting Siri

Home scree website shortcuts do not open correctly after ios7 upgrade

Just upgraded to ios7 now when i tap on a shortcut on my homepage it opens to a google.com and not the shortcut that it did previously.
Any help?

Safari has changed a lot in iOS 7. You may have to recreate the shortcuts.
Try restarting your iPad with Home+Power until you see the Apple logo.

My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!

The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

"disp+work" process in not getting started after kernel upgradation

Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
M sysno      55
M sid        TNG
M systemid   562 (PC with Windows NT)
M relno      7410
M patchlevel 0
M patchno    42
M intno      20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid        2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm)                         24288    (1104)
M DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
M DpShMCreate: sizeof(ca_adm)                           432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)                      0              (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)                         0              (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm)                       520080 (1016)
M DpShMCreate: sizeof(vmc_adm)                       0              (3208)
M DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm)          64
M DpShMCreate: sizeof(j2ee_adm)       3936
M DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M    pid = 2392
M    severity = 0
M    status = 0
M    stat = WP_NEW
M    waiting_for = NO_WAITING
M    workerType = DP_WORKER_DIAWP
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M mode_cleaned_counter = 0
M    control_flag = 0
M    report = > <
M    action = 0
M    tab_name = >                              <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for                  64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
                              711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tng

C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c    2406]
C     Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB

MBP does not come back after hybernation

Hello everyone,
I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
When I turn it back on the second time, it boots up.
Anyone else have a problem with this?
Thanks for listening!
Mark

Hello Gweedo!
Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
http://discussions.apple.com/thread.jspa?threadID=1394449
I have been perusing through that topic and hopefully they will come up with a fix for this.
The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
I even have the 'smartsleep' installed.
Thanks for commenting everybody!
Mark

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
I'm using Firefox 30.0 and Windows 7 (64 bit).
Thanks.

Hi moose53,
Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
also
Finder icon on dock, macintosh hd,
Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
delete file & restart sleep to test.

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???,

My brand new iphone 4gs from Sprints, is turning off whenever it wants and does not come back after 2 or 3 hours???

Return it for a warranty replacement.

E550 will not come back after hibernation/sleeping mode

Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

After Ios7 upgrade, my notes within each contact seems to be lost

After Ios7 upgrade, my notes within each contact seems to be lost. Any idea about how to get them back ?

Hi Dave,
Have you tried "Update DHTML effects in topics"? That might solve some of your problems. Otherwise a simple script that opens every topic, adds a space in the head section and saves the file may help you out.
Greet,
Willam

HT201270 ITunes not Showing iPad and iPhone after IOS7 upgrade.

ITunes not Showing iPad and iPhone after IOS7 upgrade. I have reinstalled iTuned. Repaired services...etc

Hey Sliqueg,
There are a few troubleshooting articles that can help resolve the issue. Check them out here:
For Windows:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
For Mac OS X:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Sincerely,
Delgadoh

Mercedes User interface does not revert back after a call

I had my iPhone 4 paired to my Mercedes and was happily using the bluetooth connectivity for making and receiving calls .
But lately when I make a call by dialing from my phone and then disconnecting the call using the car control, the car screen does not revert back to what it was and it remains in the phone mode.
This does not happen when I pick up a call using the car control.
Any idea as to why this might be happening .

Uninstall then reinstall RNR. RNR does not like to be cancelled via task manager.... this creates a mess.
Reinstall may also fix your issue with productivity center..

TS4079 Siri is not picking up my voice and Siri is not talking back after ios7 upgrade. .?

Similar Messages

Maybe you are looking for