TS4079 Siri is not working on iPhone 5 after upgrade to ios7

I upgraded my iPhone 5 to ios7 and Siri is no longer working. It is turned on in settings? How can I get it to work again

Under settings general Siri make sure that you have Siri enabled. If that doesn't work try a restart.

Similar Messages

TS4079 Siri is not working since 7.0 upgrade - if I turn Siri off it works with voice command. Microphone functions with other apps just fine. I have gone through the trouble shooting page and still nothing. I read others are having the same issue.

I have restarted the phone and reset it - Siri still not working. It does not pick up any voice - just lists some options.

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

Siri is not working in iPhone 5 even if i say properly

Siri is not working in iPhone 5 even if i say properly

Hi Mitkml!
Here is an article for you that will help you troubleshoot this issue:
iOS: Troubleshooting Siri
http://support.apple.com/kb/ts4079
Take care, and thanks for visiting the Apple Support Communities.
-Braden

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

IPhone 4 8GB white working very slow after upgrading to IOS7

Phone 4 8GB white working very slow after upgrading to IOS7

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Why i can't charge my iphone after upgraded to ios7.0.2?Battery losing quickly even it seems to be charging

My phone's battery seems not to rise even I am charging it.
And battery loses quickly after upgrading to ios7.0.2
how can this problem be solved?

Hey yly_gatsby,
Thanks for the question. I understand you are experiencing issues charging your iPhone. The following article may help to resolve your issue:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Battery does not charge
1. Verify that the outlet being used is working.
2. Try another USB power adapter if available.
3. If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
4. Try another USB cable if available.
Thanks,
Matt M.

Calender not working in 4s after upgrading to IOS 8 and and after synching with my new iphone 6 , calender not working in 6 as well. Please help.

Hi my old phone 4s after upgrading to IOS 8, Calender is not working. Just a blank page and it quits automatically. I bought a new iphone 6+ and after synching , it also showing the same issue.

There's no way a software update causes a hardware issue. This is just coincidental. Bring your phone to Apple for evaluation and possible replacement.

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

Music not working on iPhone after iOS 5 upgrade

Hi all,
Apparently I spoke too soon- To review, ever since I upgraded to iOS 5, the iPod functionality of my iPhone (ie all of my music) doesn't function. It worked for the first day or so, then when I tried to start the app, it would present with a blank white screen for about 10 seconds, then just quit. I've restarted, reset, and restored, and the only thing that helped was restoring (I've restored about 4 times now). It would then work for about a day, then not work again. I eventually got tired of restoring, and just 'unsynced' my music, then resynced again. That would again work for about a day, then I'd have to repeat that process. Now, not even resyncing my music works.
Otherwise the phone seems to be working well- no other app issues or usage issues. I'd occasionally get an error (-34) or (-50) while syncing, but I'd just 'eject' the phone, and reattach and it would sync.
I'm using iCloud for backup, and I'm syncing wirelessly, unless I restore or unsync my music, at which time I'll hook it directly to the computer.
Any suggestions?
John

Sorry, but no suggestions....I have the same problem I think... my music app just goes to a white screen then back to the home page. if i search for a song it will find it, but when i try to play it, i get a black scrren, then just back to home page. the app has worked a lot, but this has happened a few times prior and has resolved itself (not sure how), but now i can't get my music to work at all. video, everything else works...this is on iphone4s with ios 5.0.1. there's a definite bug here and hopefully enough people will complain about it to get apple to fix it! I get the feeling it has something to do with a large music library (I have 46GB) and large/complex playlists. I also seem to have a syncing problem in that music rating changes made on iphone don't get syncd back to by windows pc library. I noticed this just before the music app stopped working completely. Apple.. please help!

Yahoo Calendars entries created on Yahoo do not sync on iphone after upgrad

After upgrading to IOS4, any previous or new calendar entries that have been created on the web in Yahoo calendars do not appear on the iphone. However, if you create a new yahoo calendar entry on the iphone then it appears without any problem in yahoo calendars (and also is removed if you delete from the iphone).
The calendar is turned on correctly in Mail, Contacts, Calendars for the Yahoo accounts I have and I have even deleted and re-created the accounts on the iphone to see if that makes a difference and it does not.
Prior to the upgrade to iOS4, the yahoo calendars all worked fine.
Any ideas

To fix yahoo calendars then do the following:-
To reset, go to Settings, Mail, Contacts, Calendar. In this menu, go to "Calendars" options which is near the bottom. In the Sync categories change the setting from "*All Events*" to "*Events 6 Months Back*". Go to the calendar app and it should now Sync all of your Yahoo calendars. Go back to settings and change Sync settings back to "All Events" and they should all still appear.
Also, for each yahoo account, go into them and make sure that Calendars is set to on.

Web Query (.iqy) not working in Excel after upgrade to 11.1.1.6

After upgrade 11.1.1.5 to 11.1.1.6, the Web Query (.iqy) does not work. After open the .iqy file in Excel, entered the user and password, it only pulls in "PK" in one cell, instead of the expected analysis report. This was working in 11.1.1.5 before upgrade.
Does anyone know how to correct this issue? Is this a bug in 11.1.1.6, or required some new configuration settings?
Thanks in advance.
DX

A bug has been registered.
Bug 14040587 - OBIEE 11.1.1.6: OPENING WEB QUERY (.IQY) FILE IN EXCEL SHOWS JUNK CHARACTERS.

Simple Query working on 10G and not working on 11gR2 after upgrade

Hi Folks,
This is the first time i am posting the query in this Blog.
I have a small issue which preventing the UAT Sigoff.
Simple query working fine on 10.2.0.1 and after upgrade to 11.2.0.1 its error out
10.2.0.4:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
COUNT(*)
1
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001;
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1;
ATTRIBUTE1
00001
11.2.0.1:
=====
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=1
ERROR at line 1:
ORA-01722: invalid number
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1=00001
ERROR at line 1:
ORA-01722: invalid number
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='1';
no rows selected
SQL> SELECT COUNT(*) FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
COUNT(*)
1
SQL> select ATTRIBUTE1 FROM APPS.HZ_PARTIES HP WHERE ATTRIBUTE_CATEGORY= 'PROPERTY' AND ATTRIBUTE1='00001';
ATTRIBUTE1
00001
++++++++++++++++++++++++++++++++++++++++++++++
SQL > desc APPS.HZ_PARTIES
Name Type
======== ======
ATTRIBUTE1 VARCHAR2(150)
++++++++++++++++++++++++++++++++++++++++++++++
Changes:
Recently i upgraded the DB from 10.2.0.4 to 11.2.0.1
Query:
1.If the type of that row is VARCHAR,why it is working in 10.2.0.4 and why not working in 11.2.0.1
2.after upgrade i analyzed the table with "analyze table " query for all AP,AR,GL,HR,BEN,APPS Schemas--Is it got impact if we run analyze table.
Please provide me the answer for above two questions or refer the document is also well enough to understand.Based on the Answer client will sigoff to-day.
Thanks,
P Kumar

WhiteHat wrote:
the issue has already been identified: in oracle versions prior to 11, there was an implicit conversion of numbers to characters. your database has a character field which you are attempting to compare to a number.
i.e. the string '000001' is not in any way equivalent to the number 1. but Oracle 10 converts '000001' to a number because you are asking it to compare to the number you have provided.
version 11 doesn't do this anymore (and rightly so).
the issue is with the bad code design. you can either: use characters in the predicate (where field = 'parameter') or you can do a conversion of the field prior to comparing (where to_num(field) = parameter).
I would suggest that you should fix your code and don't assume that '000001' = 1I don't think that the above is completely correct, and a simple demonstration will show why. First, a simple table on Oracle Database 10.2.0.4:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;A select from the above table, relying on implicit data type conversion:
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001Technically, the second row should not have been returned as an exact match. Why was it returned, let's take a look at the actual execution plan:
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statementNotice that the VARCHAR2 column was converted to a NUMBER, so if there was any data in that column that could not be converted to a number (or NULL), we should receive an error (unless the bad rows are already removed due to another predicate in the WHERE clause). For example:
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberNow the same test on Oracle Database 11.1.0.7:
CREATE TABLE T1(C1 VARCHAR2(20));
INSERT INTO T1 VALUES ('1');
INSERT INTO T1 VALUES ('0001');
COMMIT;
SELECT
FROM
T1
WHERE
C1=1;
C1
1
0001
SELECT
FROM
TABLE(DBMS_XPLAN.DISPLAY_CURSOR(NULL,NULL,NULL));
SQL_ID g6gvbpsgj1dvf, child number 0
SELECT   * FROM   T1 WHERE   C1=1
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |       |       |     2 (100)|          |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    24 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(TO_NUMBER("C1")=1)
Note
   - dynamic sampling used for this statement
INSERT INTO T1 VALUES ('.0001.');
SELECT
FROM
T1
WHERE
C1=1;
SQL> SELECT
2    *
3 FROM
4    T1
5 WHERE
6    C1=1;
ERROR:
ORA-01722: invalid numberAs you can see, exactly the same actual execution plan, and the same end result.
The OP needs to determine if non-numeric data now exists in the column. Was the database characterset possibly changed during/after the upgrade?
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Send button not working on sms after upgrade

My send is no longer working on sms after i upgraded. I have done factory setting and still not working . Any ideas of anything else i can try ? frustrated

I have same problem. Can open message. As if keyboard is frozen.
Unable to type then send. Also, tried shutting off preview.

Fullscreen mode not working in aperture after upgrading to Lion

I recently upgraded to Lion and Aperture is not working at all in Full screen mode. I have followed the ideas in the forum (unchecking the preferences for spaces) and nothing has worked. I have reinstalled the Aperure update and this did not work either. Any other ideas?
regards, Jim

Jim,
Try this:
if Aperture is running, quit;
control click Aperture's icon in the dock;
in the menu that pops up, navigate to the Options sub-menu;
make sure "None" is selected in the "Assign To" section at the bottom.
Mine was originally set to "This Desktop", probably as a hold-over from Snow Leopard, where I had Aperture assigned to its own Space. After I updated to Lion, Aperture was misbehaving in full screen mode until I changed it to "None".
I hope this helps...
- Bob

BINARY SEARCH does not work as before after upgrade

We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice Ishee

Hi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens

TS4079 Siri is not working on iPhone 5 after upgrade to ios7

Similar Messages

Maybe you are looking for