TS4113 Mac mini looses audio output through HDMI after being in 'sleep mode'

Since a month or so, my Mac mini is unable to send audio through HDMI output after being in 'sleep mode'.
Recently this was no problem, but now I cannot hear anything after unsleeping (unless I reboot fully).
Please help.

This is not just a Mac Mini problem. I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
The common factor is Mountain Lion.
Apparently there is a new build (12F42) which is supposed to fix this.
http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
Apple released it to their employees on the 25th Sept.
Here's hoping that build is available for the rest of us soon ...

Similar Messages

How to get the Mac Mini Digital Audio output at 192kHz?

I have a mid 2011 Mac Mini (and love it). According to http://support.apple.com/kb/HT4806, "The headphone / line output port accommodates digital optical audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate and supporting encoded digital audio output (AC3 and DTS)."
So there is digital audio output to 192 kHz but how do you configure it to work? Using the Audio Midi Setup Utility, I can set the sample rate to 96000 Hz -- but it won't go higher to 192kHz. Anyone know how to do this?

That is in some ways confusing. For the analog output, the
internal DAC can support 24 bit/192Khz audio data. It does
require an application that has the capability of playing back
such material.
The TOSLINK optical standard does not support this data rate.
It has nothing to do with the Mini, it is the standard itself. The
TOSLINK optical spec is 96 kHz, 24 bit stereo (uncompressed).
The mini will however support multichannel, 24 bit, 192 kHz
(uncompressed) via the HDMI interface. Also, again,
the playback software needs to support it.
Just as a final note, unless the source material has the
higher sample rate format, there is no benifit to outputing
at the higher sample rate, especially if the source some
lossy comporessed format (mp3, aac, Dollby and DTS
non-HD formats).

Mac Mini Digital Audio Output

Hi,
My friend is trying to use the only audio output from the Mac Mini (1.42 GHz) as a digital out. He was under the impression that when you hook up the right cable (which has bought and we double checked-optical audio cable with Toslink adaptor.)
But when we go to pref. menu there is no selection for digital audio out except for the regular line out.
Any ideas or tricks to getting digital out on this Mini?
Thanks,
Babak

Does he have the 1.42ghz G4 Mini? If so, that model is not a digital/optical audio out jack, at least not the 1.42ghz model I have. Did not check to see if a later update prior to the intel switch added the port to that model. My 1.66Ghz intel mini has the digital/optical audio out. Tell your firend to check the manual that came with his mini, it will tell you if it is a digital/optical out port or not.

HT4806 Mac mini digital audio out through the headphone jack

I'm misled by this sentence for audio out port from the support page: "For digital audio, you can use Apple iPhone headset with microphone".
http://support.apple.com/kb/ht5539
It is there for all mac minis starting from 2010 model.
Does it mean electrical digital signal? Any chance to get S/PDIF coaxial signal?

If an optical signal is OK, you just need one of these:
http://www.amazon.com/dp/B00016W6Y6
To convert the optical signal to a co-ax one will need a more complex/expensive convertor.

Sound Output changes from headphones to HDMI after waking from sleep

My late 2013 Retina MBP has had this issue since I purchased it last year, but I'm hoping there's a solution.
When I'm working at my desk, I have an external monitor connected via HDMI (and a 2nd via Thunderbolt). The Monitor connected via HDMI has (crappy) speakers. Even though I have headphones plugged in, when I wake the machine from sleep, the audio device will revert to HDMI.
Any ideas how to prevent this?
Thanks

Others here are also suffering from similar problems after the last update.
see > loss of sound after waking up from sleep: Apple Support Communities
and > TS4113 Mac mini looses audio output...: Apple Support Communities
For some installing the > OS X Mountain Lion Update v10.8.5 (Combo) over the top of the current 10.8.5 version solved the problem.
It might also help to report the problem to > Apple - Mac OS X - Feedback
and/or > Apple - Mac mini - Feedback

Mac Mini PPC Audio Problem

Hello for everyone!
My name's Michele and I'm an Italian's Student (sorry for my bad english )
I have a problem with my MAC Mini PPC.
Under Tiger 10.4.11 OR Leopard 10.5.5 (every version and every update) the audio works and not works!! (for example: I booted my mac mini, the audio works correctly! After 10 minutes, the audio don't work... O_o)
After another 30, 40 minutes... the audio works now!
Under System->Preferences->Audio the settings are right, and in the sidebar (on top) the audio's icon it is activate!
Where is the problem???
Help Me please
Thanks!!

sorry

MAC 5.1 audio USB to HDMI surround

Hi - Anybody know how to connect any MAC 5.1 audio USB to HDMI surround - which connectors would be needed. Realize latest mini display port would
do it, but not everyone has one. I want for anyone's computer to output 5.1 to surround system. Magic if you know what connectors required...

I know it's nearly a year later, but I am having almost the exact same issue that you were having reconfig2501. It seems to still be present on Premiere Pro CC (2014) on Windows 8.1. It's great that Premiere is allowing 5.1 audio tracks, but how am I supposed to preview the 5.1 audio on my timeline? If I am editing for HD Broadcast that supports 5.1 channel audio, I shouldn't have to export to ac3 and burn a Blu-Ray/DVD just to preview the 5.1 audio.
See my new thread here with screenshots:
Output Mapping Preference for 5.1 Audio

Mac Mini A1176 Audio

Hello Everyone,
I'm faily new to Mac world and I have a question about Mac Mini A1176 Audio to HDTV. I'm trying to make a HTPC and followed couple of guides online but I didn't get clear understanding of Digital Audio from Mac Mini to HDTV. I can configure the structure with stereo headphone to RCA but would like to know if there is a possibility to get digital audio. I have DVI to HDMI cable running from Mac Mini to HDTV but it doesn't give audio (as also stated by mac documentation). I would appreciate any response that could direct me to correct configuration of my HTPC with digital audio.
Thanks,
Pyraxic

Only the newer Mac Mini's with a true HDMI output connection supports digital audio down the display cable.
If your HDTV or Stereo Receiver supports Optical (Toslink) Audio input, then you could use a Toslink cable with a 3.5mm adapter on one end connected to the Mini's headphone jack. see > NewerTech CBLAOPTMT Toslink to Mini Toslink Optical... in stock at OWC
If not, then you are limited to the current 3.5mm to RCA cable connection that you are now using.

No audio / video through hdmi from vista home premium

dear friends
am using dv6000 with vista home premium
trying to connect tv output through hdmi but unable to show show either audio or video
with the same cable, i tried in diff laptop and it works fine
pls advise me
i have my windows and all drivers updated

When you run Lenovo driver installer downloads, the drivers are not installed. This is normal (!). The drivers are unpacked into a directory on your disk, usually under C:\DRIVERS. You have to follow the installation instructions (on the same page you downloaded from). Usually they say go to the directory where the drivers were unpacked and run setup.exe, but not always, so you have to pay attention if you choose to install the drivers this way.
The simplest way out of your situation is to manually install the Ethernet drivers, plug into the Internet, then download and install ThinkVantage System Update, and run it. It should churn away and automatically install all the right stuff.
Whether you choose to install the ThinkVantage stuff manually or automatically using System Update is up to you.
BTW it sounds like you MAY have blown away the Lenovo Rescue & Recovery partition when doing your "upgrade". If you did, and you want to get that back, you will need to call Lenovo for a recovery DVD, and start from scratch.
Message Edited by bananaman on 02-28-2009 10:20 AM
I don't work for Lenovo. I'm a crazy volunteer!

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

Mac mini optical audio failure

Hi, I ask for help regarding a problem that is affecting me about my Mac Mini 3,1 with Lion 10.7.1 connected to an amp with optical cable Sony HT minitoslink -> toslink.
Until a few days ago, everything has always worked perfectly. In these days, after turning on the mac mini, the audio comes easily to the amp, so I can see DVD movies and MKV in multichannel audio mode. After about 10 minutes, while the video continues, the sound stops. I try to restart the mac mini but the problem remains.
In addition, when i disconnect the optical cable from the amplifier side, the red light is not present. If I link a headphone to macmini or set-up to internal speaker analog audio works fine.
If I turn off the mac mini and power back up after fifteen minutes, the optical digital audio back, but it turns off after 10 minutes.
I tried to connect the cable to another macbook: it works regularly and the red light is turned on regularly for some time.
I did a clean install of Snow Leopard 10.6.7 on a USB drive and unfortunately there are the same audio issues.
In your opinion can be a problem with cable or there is a problem on macmini sound card?
I tried to reset the PRAM and SMC, permission repair, delete audio preferences, but nothing changes.
I also tried the Apple Hardware Test and the Apple Diagnostic Disk and the result is okay.
Can you help me?
Thank you for your attention

Hello, I solved the problem. I moved the Mac mini in a ventilated place, then I turned it on and I put the headphones into the "audio out". I restarted the computer three times, then I put the optical cable and everything works as before!
The CPU temperature was 72 ° C. I used the software smcFanControl and the temperature dropped to 52 ° C. I think the Mac Mini overheats so much. Now is okay, I have seen many movies in Dolby Digital and DTS.
I hope that you solve the problem.
Goodbye!

Mac Mini for audio recording using LOGIC X

Has anyone had experience using the latest Mac mini for audio recording? I'm thinking of purchasing the 2.6GHz Quad-Core Intel Core i7 16GB 1600MHz DDR3 SDRAM - 2x8GB 1TB Serial ATA Drive @ 5400 rpm model. I'll be using Logic X along with Reasons, Wave, UA plugins with a Apollo I/O I'd appreciate any feedback and or suggestions.

I'd work off of another hard drive as much as possible. Install the applications to your boot drive, but keep your data on a separate external hard drive. If you try to run OS, apps and big audio data off of that 5400, I foresee performance issues even with 16GB of RAM. Also, don't forget a second external hard drive for your backups.

Mac Mini 2014 Oct cannot wake up after sleep

Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep". The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
MacBook Pro (Mid 2012 and later)
MacBook Pro (Retina, Mid 2012 and later)
MacBook Air (Mid 2012 and later)
iMac (Late 2012 and later)
Mac mini (Late 2012 and later)
I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
1. When in the terminal mode type:
pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
2. Change your standbydelay to 86400    86400 is number of seconds which is 24 hours. Here’s the command:
sudo pmset -a standbydelay 86400
3. Change autopoweroffdelay to 86400 Here’s the command:
sudo pmset -a autopoweroffdelay 86400
4. At last but not least change autopoweroff to 0   Here’s the command:
sudo pmset -a autopoweroff 0
Run pmset -g to verify your setting have changed. I rebooted my system and checked again to make sure. Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours) I hope this helps!

My Mac Mini starts to boot up then after a few minutes turns off. Please help.

My Mac Mini starts to boot up then after a few minutes turns off. Please help.

seen this happen many times, usually always due to corrupt memory.......could be a power module in the Mini, but unlikely. hold down command R on startup, see if you can get into safe mode or ANY SCREEN ...If under warr. call mac for a service check, ....BUT if you have spare memory around that is compatable, try that first, process of elimination diagnostics.

TS4113 Mac mini looses audio output through HDMI after being in 'sleep mode'

Similar Messages

Maybe you are looking for