TS4123 Error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Dear All,
I've receive a error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Due to this had cause me unable to back up my iphone. Please advice how can i reslove this.
This happens after I install Sumsung application on my PC.
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy
Similar Messages
-
Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? What do I need to do?
Hi Hans - I'll do my best
First I assume you are logged in as adminstrator on the computer you are using. You mention only seeing Mojo Pac in your Program Files, but there would be far more programs listed there. There are several ways you can find your Apple Application Support file folder.
For Windows XP - How to Search for a File or Folder
To search for a file or folder:
Click Start, and then click Search.
In the Search Companion dialog box, click All files and folders.
Type part or all of the name of the file or folder, or type a word or phrase that is in the file.
So in your case it would be Apple Application Support.
If it doesn't show, you will need to make sure that you have enabled the search for hidden files or folders.
To search for hidden or system files in Windows XP:
Click Start, click Search, click All files and folders, and then click More advanced options.
Click to select the Search system folders and Search hidden files and folders check boxes.
Then search again for the Apple Application Support folder.
I'm assuming that you will locate it. Once you have done so - click on it to open it in Windows Explorer.
Then you should locate libxml2.dll - right click on it and select (left click) Copy
On the left side of the window, under Apple Application Support folder, you should see Mobile Device Support - Right Click on it - Select (Left Click) on Paste.
Start your iTunes programme.
Good Luck and let me know how you get on. -
When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."
Are you really using Windows ME?<br />
Your More system details list shows an IE8 user agent
You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
I tried to download the update but something went wrong so when I open Firefox I get the error message: The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll.
What do I do? DO I reinstall Firefox? And if so, how do I restore my bookmarks?
Thank you so muchIf you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
Maybe you are looking for
-
Problem creating JMS Error Destination via Ant in WLS 8.1
We've got several JMS queues in our application. We create the server via Ant (using the wlconfig task). All is well, the queues have been working fine, until we try to add an error destination queue (after several attempts to handle the message, it'
-
Problem with my charger AC-4 = AC-4E
hello everybody, i have this problem: I lost my original charger AC-4 for my Nokia N73 and i have replaced with a new but AC-4E . Can this charger will work correct with my phone and does't have any problems? best regards
-
How do I connect wirelessly my airport express to an XBOX 360?
-
How to burn and finalize a dvd for the dvd player?
I just upgraded to Lion on my MacBook Pro. I burned a dvd from a torrent through the Mac's own disk utility. I didn't see anywhere that it finalized it. It did say it verified it. Is this the same thing? I am trying to play this dvd with is DVD+R on
-
hello everyone, im having a problem woth my ALV, how can i merge rows in ALV, example i want to merge row 3 and row 4? Another 1 how can I format a certain row in ALV? example row 5, I want the displayed value be centered, or right aligned, or left a