TS4153 few files and folder are not deleting from trash folder

i am trying to delete all files and folders from the trash folder by clicking  empty securely, but its not deleteing the files anf folder. please suggest how to clean the trash folder by deleteing all the deleted files and folder.

Securely deleting items in Trash writes Zeros over the data so that it is completely eradicated.
This will take quit a long time depending on how much data you have in Trash.
Unless there is data that needs to be rendered unrecoverable in the Trash, you could choose to just delete the files and folders with out the secure option.
Once you have Emptied the Trash unsecurely you can always use disk utility to Securely Erase Free Space on the Drive.

Similar Messages

  • Trash will not delete from trash folder! What can cause this effect?

    Trash will not delete from trash folder! What can cause this effect?

    u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
    try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
    as chamar suggested look at http://www.thexlab.com/faqs/trash.html
    i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
    best of luck

  • DMS: Documents opened in edit mode(CV02N) are not deleted from Temp Folder

    Hi All,
    My query is whenever i edit documents like word,pdf or autocad files in cv02n, it make a copy in my c/windows/temp folder but doesnot delete them when it close the transaction. i have given PC data carrier with path as %Temp% & in profiles i have defined the path as c/windows/temp/
    So is there any solution by which the files opened in the edit mode will be deleted when i close the transaction or else after some specified time it should get deleted from the temp folder. Is there any standard configration for it.
    Note: I have tried the 741388 note but it is only for display mode documents.
    Regards
    Nishant.

    Hi Nishant,
    unfortunately this is the standard behavior as for editing the application need a
    temporary file and this file is still stored after closing the application to enable a re-checkin in the future too.
    So the only possibility is to delete the temporary files from C:\Windows\Temp after some time manually. There is no functionality in the system standard as the SAP system has no control on the windows folders. 
    To achieve a very similar behavior you can set the "Delete after checkin" flag in transaction DC30 for this applications and see if this will meet your requirements.
    This flag means that the original file gets deleted after you check them into a storage category. Maybe this could be usefull.
    Best regards,
    Christoph

  • Messages are NOT deleted from tables XI_AF_MSG and XI_AF_MSG_AUDIT

    Hello,
    I set the retention period to 7 days (1 week)
    I also set the default ARCHIVE and DELETE jobs and ALL are working fine.
    However, messages with OLD dates are NOT deleted from the tables XI_AF_MSG and XI_AF_MSG_AUDIT.
    These tables 32GB in the DBD table space.
    I tried to use the URL:
    http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
    BUT to NO avail.
    How do I DELETE or ARCHIVE these messages ?
    ============================================
    Here are some more details on the content of the tables (I took into account 1 MONTH retention):
    db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='SUCC' and TIME_STAMP < '2007-09-10 00:00:00'"
          28947
      1 record(s) selected.
    db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='ERR' and TIME_STAMP < '2007-09-10 00:00:00'"
          13243
      1 record(s) selected.
    db2 "select count(*)  from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='NDLV'"
           1048
      1 record(s) selected.
    db2 "select count(*)  from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='DLVD'"
              0
      1 record(s) selected.

    Hi,
    First, thank you VERY much for answering.
    Now to your questions:
    1. When using the URL:
    http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
        I did NOT get any ERROR messages.
        Thousands of messages where DELETED successfully.
        However, the number of rows in XI_AF_MSG_AUDIT did NOT reduce.
    2. I used the default archiving and deletion customizations and jobs.
       However, I ran them manually a few times a day with NO change in the
       number of rows in XI_AF_MSG_AUDIT
       What do you mean by "customized any Archiving for adapter Engine" ?
    . In RWB, I do see the default job is running
    Have you customized any Archiving for adapter Engine or You are using default arciving which runs every 24 hrs.
    3. I did ser the retention period for the adapter engine messages in visual admin in seconds...
    Please, advise further.
    Kind regards,
    Gil

  • Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

    Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening!  Help!

    Hi Monika,
    I have spent the last two or three days trying to do what you suggested.  I uninstalled Adobe 6 from Windows.  Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
    I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs.  I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
    I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool.  I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat.  Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number.  After two hours I had nothing but instructions to wait another 20 minutes for a case number.
    Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed.  I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner.  The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
    When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me.  Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
    Would appreciate any help you experts can offer.  If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
    Exhausted and still desperately in need of help...

  • Aperture ate my picture files and they are not recoverable.  The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall.  But Purchases says it is "Installed" so it does not let me download it again.  HELP!!!!

    Aperture ate my picture files and they are not recoverable.  The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall.  But Purchases says it is "Installed" so it does not let me download it again.  HELP!!!!

    I typed Aperture into Spotlight and sure enough it did show up.
    It looks like it is supposed to be in Apps.
    But it is not there.
    So I clicked on the spotlight Aperture and it opened up the App!!!!
    But I do not know where it is to move it!
    How can I find it?
    While Aperture is running and you are seeing it in the Dock, ctrl-click (or right click) the Dock icon.
    You will see a contextual menu. Click on "Options", then select "Show in Finder".
    And check the "keep in Dock" mark, so you will not lose it from the Dock.

  • Rokr: "Some files and applications are not accessible"

    Help please? When using USB to connect to my ibook the phone gives me this message: "Coneced as Storage Device: Some file and applications are not accessible". I then go to my desktop and search through my phone to find no files not to mention not showing up in iTunes. Could someone please help?

    I am having a similar problem.
    My RoKr was connecting and syncing properly until I performed the latest software upgrade (which upgraded both iTunes and iSync). After the upgrade my phone does not show up either in iTunes or on the desktop. When I plug the phone it indicates that it is connecting as a storage device and some file/applications will not be accessible. However the phone does not appear on the desktop or in iTunes. When I go into iSync the phone is only recognized via bluetooth, the USB connection is not detected.
    I remain tuneless and await a solution...
    PowerBook G4   Mac OS X (10.4.2)  

  • I have a HP-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc

    I have a HP-AMD A4-6210 Laptop with Windows 8.1 ... and Videos are not playing from youtube espn etc
    This question was solved.
    View Solution.

    Hi,
    Try a clean installation of the flash plugin/activeX as follows.
    First, download the Flash uninstall utility on the link below and save it to your Downloads folder.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows, open your Download folder and run the uninstaller.  After this has completed, restart the notebook.
    When windows has reloaded, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    When the installation has completed, restart the notebook.
    If the above doesn't correct the issue, then try the following.
    First of all, download and run the Shockwave uninstaller on the link below.
    http://fpdownload.macromedia.com/get/shockwave/uninstall/win/sw_uninstaller.exe
    After this has completed, restart the notebook.
    When windows has fully reloaded, download and install the latest version of Shockwave on the following link.
    http://get.adobe.com/shockwave/
    Again, after this installation, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Persistent messages are not deleted from JMS store

              Hi,
              I'm experiencing some unexperienced JMS store behaviour with WLS 6.1 sp 4. I have
              a servlet that posts a message to persistent JMS queue, which will be eventually
              consumed by an MDB. Even though consumption is successful, the message is not
              deleted from JMS store.
              The message will be redelivered after server restart and is still not deleted
              from JMS store. I verified this using file store and JDBC store. The messages
              actually stay in the JMSSTORE table till doom's day.
              I couldn't reproduce the case with WLS 6.1 sp 3. Exactly the application code
              was used in all cases.
              Subsequently I ran the same case with various ServerDebug DebugJMSXXX-flags set,
              and discovered that WLS 6.1 sp3 logs 'asyncDeleteL' and 'ZZZDelete' for the consumed
              message. WLS 6.1 sp4 didn't log this information.
              I'm running WLS 6.1 on WinNT and Win2000.
              Comments?
              b r
              Juha Räsänen
              

    I've am having exactly this problem with wl 5.1....
              I first saw it with 5.1 sp8....
              In the release notes for 5.1 sp10, the following CR was fixed, which seemed
              like it might have been my problem:
              CR 45915
              Fixed a JMS problem with messages begin left in the queue after received messages had been acknowledged. When a high volume of
              messages was sent to a queue and a consumer retrieved those messages and sent them to another queue, the messages were not being
              removed from the first queue even though they were acknowledged.
              We upgraded to 5.1 sp12, and it appeared that the incidence of that problem was reduced.
              However it still occurs once or twice a week, with 5.1 sp12....
              My situation is a little bit different, in that my consumer retieves a message, and sends another
              message to the SAME queue instead of another queue as described in the CR above...
              It does happen under heavy load, etc....
              Don't know if this has been reported and identified for wl 5.1 sp12 or not...
              It is of course a really difficult to deal with bug....
              Jason
              "Juha Räsänen" <[email protected]> wrote in message news:[email protected]...
              >
              > Hi,
              > I'm experiencing some unexperienced JMS store behaviour with WLS 6.1 sp 4. I have
              > a servlet that posts a message to persistent JMS queue, which will be eventually
              > consumed by an MDB. Even though consumption is successful, the message is not
              > deleted from JMS store.
              >
              > The message will be redelivered after server restart and is still not deleted
              > from JMS store. I verified this using file store and JDBC store. The messages
              > actually stay in the JMSSTORE table till doom's day.
              >
              > I couldn't reproduce the case with WLS 6.1 sp 3. Exactly the application code
              > was used in all cases.
              >
              > Subsequently I ran the same case with various ServerDebug DebugJMSXXX-flags set,
              > and discovered that WLS 6.1 sp3 logs 'asyncDeleteL' and 'ZZZDelete' for the consumed
              > message. WLS 6.1 sp4 didn't log this information.
              >
              > I'm running WLS 6.1 on WinNT and Win2000.
              >
              > Comments?
              >
              > b r
              > Juha Räsänen
              

  • While deleting project from CJ20N entries are not deleted from table PRPS

    Hi,
    I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
    Any deletion Flag should also be checked?
    Thanks in advance!
    Regards,
    Jyoti

    Hello,
    Thanks for reply !
    My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
    Why they are appearing in PRPS table and how it can be deleted?
    Thanks !

  • File not deleted from the folder

    Hi All,
    Im executing file to idoc scenario.
    my file processing mode is "delete" . But the file is not getting deleted from the folder but im getting success message in moni..
    other communication channels which are using the same ftp parameters are executing fine ( i.e files are getting deleted and success msg in moni ).
    the following is the error msg that i found in communication channel monitoring ...
    Failed to delete file 'IF416AQ1n.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor.
    please help me in this issue..
    deepu.

    Hi all,
    Thanks for your replies..
    Im using a file of size 230744 bytes of type dat.
    time out: 600
    poll interval: 300
    retry interval : 120
    i communication chanell monitering i can see the following message ..
    Failed to delete file 'IF416AQ1.dat' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 421 Timeout (120 seconds): closing control connection.'. For details, contact your FTP server vendor
    file is not getting deleted.. what are the changes that i need to make ???

  • Have accidentally deleted draft email and it's not in the trash folder in email or my trash bin. Anything else I can do?

    I have accidentally deleted a draft email. It's not in my trash folder in mail, or the trash bin. Anything elese I can do?

    Mail application?
    Some ideas.
    https://discussions.apple.com/message/12137848#12137848
    If it was on your computer long enough it may be in your backup if you have one.

  • Photoshop CC OSX 10.6.8 Patterns in the Patterns folder are not available from the fill menu? Any help would be appreciated.

    Patterns which do appear in the Adobe Photoshop CC, Preset, Patterns folder are not available as a "Fill" option.
    Any help would be appreciated.

    Have you repaired the disk permissions?
    You might also try resetting the photoshop cc preferences by:
    Press and hold the Shift+Command+Option keys while starting photoshop cc
    Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop settings file
    Press Yes because you do.

  • All my songs and pictures are not transferring from my old phone !!!!!!

    I had the iphone 4S and yesterday I went and got the iphone 5. I am trying to transfer everything using my icloud. All my apps,notes,txt msgs,contacts... everything like that was added onto my new phone. My pictures & music however, are still all adding, it has been loading since last night, this morning I noticed that it has stopped loading on this one song, and this one picture ( I have ALOT of pictures & music) so when I go into my photo app is says " downloading 2,027 of 2,984 " and it hasnt changed for hours!!! Same with my music I go into itunes and it says I have 26 songs left to download and they are not loading, they all say " waiting..." below them!!!
    What should I do ? ..or will it EVENTUALLY load. I must have enough space on this new phone because I did on my old one....and I have deleted quite a few apps that were added from my old phone to my new one.
    Pleasssseeeeeee HELP, thankkkssss (:

    Check what steps you have taken against this
    http://support.apple.com/kb/ht2109
    After that time I suspect it has "frozen "
    Start again having checked out above

  • Emails are not delete from the handheld/server

    Hello,
    Our client has Blackberry 8330.
    Emails are not deleted nor from the server nor from the phone. Maybe there any other setting set? Or are these settings set wrong?
    Thanks you
    He has these settings:
    under Messages - Options - General Options, there's this field for "Keep message for" --> 2 months
    The Options >Email reconciliation
    Delete On: Mailbox & Handheld
    Wireless Reconcile: ON
    On Conflicsts: Mailbox Wins

    Endriuska wrote:
    It looks like it only synchrozines mailbox to handheld(if deleted from mailbox, will delete from handheld), but will it delete from mailbox if the email is deleted from handheld?
    As discussed in the KB I linked for you, it depends. If, in the top grid, there is a YES in the Wireless Deletion column for the subject email service AND you have further configured, as per the KB you found, for deleted item reconciliation, then yes it should delete from the server when you delete from the HH.
    Note that there may be a time lag, however -- deleted item reconciliation tends to be one of the lowest priority activities inside of both BIS as well as the email providers systems...I've seen it take up to 24 hours (not normally, but that's the extreme that I've witnessed).
    Further, I believe that the on-HH setting for "Keep Messages" should have no effect on the server...deleted item reconciliation is a function of the end user actually deleting from the HH...not the auto-removal by virtue of this setting.
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for