TS4180 Issues correcting photo orientation using Windows Photo Gallery

Photos downloaded from iPhone 4 to PC running Windows 7 can't be saved after editing (ie. rotation). Message: "This photo can't be saved because of a problem with the photo's file properties." When I close that dialog box, another comes up with the message giving the error code: 0x80070057 saying that the photo can't be saved. Someone suggested opening the photo in Paint and saving it as a jpeg file, but my photos are already in jpeg format. Any help would be appreciated! Thanks...

As long as you've backed up your photos, what you use is really a matter of personal preference. To avoid duplicates, pick one program. Getting rid of duplicates that you already have is probably going to mean going through the photos one by one.
For problems with Windows Software, you're probably better off posting on a Windows forum.
Best of luck.

Similar Messages

FTP logon issues on IIS 7 using Windows Server 2008 R2

Hi, I'm currently experiencing issues when trying to log on to an FTP server I created using Windows Server 2008 R2.
The FTP web site has Enabled both Anonymous and Basic Authentication.
On the Authotization Rules it has enabled Allow All Users and Anonymous Users with read permissions, and the local administrator with read and write.
Whenever I try to log on, either via IE or Command prompt, when asked for credentials, I get logon failures, either with anonymous or a username that has access permissions to the FTP root folder.
I tried changing the FTP application pool identity to Network Service, but still get the same error. I also have tried testing the connection from the basic settings section of the FTP Site, and when I test it using Application User (use pass-through authentication)
I get an error that says: ¨IIS Manager cannot verify whether the builtin account has access¨If I instead use a username and password, the test passes ok, however using this account to try to enter the FTP site I get logon failure, even when the account
I´m using is a local admin account.
The Server is part of an AD Domain.
I have read a few blogs and forums about problems with FTP validation but nothing related exactly to my issue.
Any ideas are deeply appreciated.
thanks
Eduardo Rojas

Hi, I would tend to ask on IIS forum (iis.net), as you might get more attention and help there.
For your issue, I would tend to think that you need to set the correct security on the FTP's home folder, but again it's only an advice, as I'am not an IIS's guru.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Issues with Photo Gallery

In my gallery, the photos resize and display fine. However,
during the transition period, there is wierd overlap corruption of
the images. Instead of going immediately to the div holder's
background image, it pre-loads the selected picture, distorts it,
and then flashes the background color before morphing to the
correct picture.
Also, I have links as my gallery listing. For some reason,
when I click on the gallery links, the associated pictures do not
load until thumbnail action is taken.
Any ideas?
Here
is the latest version of this issue

Kin --
Thank you for the response. I figured out a different
solution to the wierd image problem. However, I am still unable to
get the images to shift automatically when the gallery is changed.
For example, if I am viewing a vertical image under the "flowers"
gallery and then switch to the "waterfalls" gallery, the vertical
image remains until I click on one of the waterfall thumbs.
Any ideas on how to get this to go? It does it in the demo,
but I cannot figure out what I need to do with my code to enable
this. Thanks for your help, as always, with this. I really
appreciate it!

HT201317 When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

When I view photos on my devices some are not oriented correctly. I used Picassa to turn all photos upright and then copied those photos into the upload file but they are still not corrected when viewed on my devices (ipads)

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Photo Orientation on Windows platforms

I am so sick of flipping and turning my pictures every time I transfer them to my pc. Is Apple going to address this issues anytime soon?

As I said, the orientation of photos is set in the EXIF data of the photo itself. Whatever you use to view the photo, whether it be Windows Explorer or some other program, should obey the orientation data and display the photo whichever way up it was taken.
Picasa for Windows is written correctly and shows photos correctly. It is Windows that ignores the EXIF data, and as Microsoft make Windows, who else's problem could it be?
http://superuser.com/questions/61398/how-to-make-windows-7-aware-about-iphone-ph oto-orientation
http://stackoverflow.com/questions/3689259/iphone-avfoundation-image-exif-orient ation
Read more about EXIF photo orientation, and the fact that Windows ignores it here:
http://www.impulseadventure.com/photo/exif-orientation.html

The image color in Windows Photo Gallery is wrong, same image in other program color is correct.

This is the correct color form Google Image:
This is the color from Windows Photo Gallery:
It looks like it is a issue of Windows Photo Gallery bcause if the same image is opened in another program(Photoshop, paint, etc), the color stays same, the thumbnail color is correct as well. However, it is different in Windows Photo Gallery.
Does anyone know what the problem is？
Thanks.
W520 4276-23U | Intel i7-2920 XM CPU | 16 GB RAM | Nvidia Quardo 2000M | 1920x1080 Display | Intel Advanced- N 6205 | Color Sensor | Finger Print Reader | BIOS1.34

Windows photo gallery is not colour profile aware, so assumes your monitor is sRGB. The same is true of the desktop wallpaper. There is nothing you can do about this, other than use a different default picture viewing application as default, or convert your images to the ICC profile of your monitor (which you can do in photoshop). I would only recommend this for wallpapers though.

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

When I send a photo directly from iPhoto using the Mail app on my iMac, the wrong photo appears on my iPad2 Mail app. However the correct photo shows if I log into gmail on the iPad2. I assume there is a glitch with my "Mail" app on the iPad2.

When I send a photo directly from iPhoto using the Mail app on my iMac, the wrong photo appears on my iPad2 Mail app. However the correct photo shows if I log into gmail on the iPad2. I assume there is a glitch with my "Mail" app on the iPad2? Any suggestions for getting the correct photo to show on iPad2?

Update: I was able to have the correct photo show in my email as received on my iPad2 by changing a setting on my IMac prior to sending the photo on the email.
On the iMac, I went into iPhoto > Preferences > Email photos using > Mail (in lieu of "iPhoto"). This seems to have corrected the issue. I'm not sure why. Now the correct photo shows up when received on my iPad2.

When I try to go to the photo gallery to choose a picture to send to my email address by using my Iphone it can't send or receive messages. Yahoo password is being asked which I have forgotten. How can I correct this?

With my my I phone as I try to choose a picture from the photo gallery to send it via email using my Iphone, I can't seem to send nor receive messages anymore. It is asking for my yahoo password. What password will that be as I have forgotten it. I know what my personal password on my yahoo address when I go to a regular laptop or desktop but with Iphone I am unable to to retrieve this password because it does not give you an option to change a password. What shall I do to correct this problem?

It's the same password. Go to settings - mail - yahoo - enter the password for your incoming and outgoing mail server.

HT201302 Is it better to save photos using windows photo gallery or windows live photo gallery?

Is it better to save photos from iphone 4s to laptop ..windows 7... using windows photo gallery or windows live photo gallery? ive used both and it appears to be adding all photos each time i do it despite which one i use. My laptop is filling up with the same photos 2,3,4,5 times.... Depending what was on my phone at the time.... the older photos have been repeated more often. I thought when importing to laptop only new photos would be added... how do I change this?
Also now I have so many duplicates i dont know which ones to delete as some have been saved as jpg... , imgJPG...., vcm_s_kf.... and vcm_s_kf_repr.... Why? and which ones do I delete?
I have deleted some photos and pictures which look like computers, printers , docket printers etc Since then my Media Gallery does not work. Have I accidently deleted a driver or something? or is Media Gallery just overloaded?

As long as you've backed up your photos, what you use is really a matter of personal preference. To avoid duplicates, pick one program. Getting rid of duplicates that you already have is probably going to mean going through the photos one by one.
For problems with Windows Software, you're probably better off posting on a Windows forum.
Best of luck.

I updated my ipod touch 4th gen to ios 5 and lost all my photos. how can i get it back? i'm using windows 7.

I updated my ipod touch 4th gen to ios 5 and lost all my photos. how can i get it back? i'm using windows 7. help please? thanks!

This was the scenario:
The first time I updated, it was only my music that was lost.
When I got my music back, I lost my apps.
When I got my apps back, my contacts, notes and photos were lost.
Now I got back everything except for my photos.
(Yes, I restored from backup several times since the first update.)
Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
Thank you.

Video download from SD card 2 iPad 2 interrupted, file corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Photo problems and can i drag and drop files using windows explorer?

i can only sync photos frm my com to my touch but i cant choose which photos i want and i tried searching for the files in itunes and i cant find them, thus cant delete them...
on top of that, i can access the files in my touch but cant find any option to delete them...
when i go the photos tab in itunes, it only shows me the window to sync files and the 2nd question too...
because when i drag and drop on itunes, it's quite laggy...and if i use windows explorer to drag and drop, will the duplicates on my playlist appear as 2 files or will it be like itunes where it can detect the main file and simply adds it to the list?
thank you...
sorry for the wall of text...

There's no manual mode for photos just different ways to sync but here's a simple "How To" on managing your photos so that it's easy to add and delete what you want on the iPod:
1 Create a folder on your hard drive to hold the photos you want on your iPod. Call it iPod Photos for example
2 Drag the photos you want from your usual picture folder into the folder you just created
2 Open iTunes, select your iPod in the iTunes Source list.
3 Click the Photos tab and select “Synch photos from.”
4 Choose “Choose Folder” from the pop-up menu and select the iPod photos folder you created.
5 When you want to change what photos are on the iPod just add or remove the photos from the folder you have made and syncronise the the iPod
You can't drag photos or music to the iPod from Windows Explorer, you have to add content through iTunes or you'll not be able to view or play it.

Bridge Opens files using Windows Photo viewer - not Photoshop CC. How do I change default?

Bridge opens image files using Windows Photo viwer - not Photoshop CC. This is an utterly useless default setting. How do I get Bridge to open a file in Photoshop?

Edit/preferences/file type association. Set extensions to prefered default.

Can't open RAW photos on elements 10 using windows XP. is there a solution?

i'm using a Nikon D3300 and can't open RAW photos on elements 10 using windows XP. none of the plugins i've tried worked.
please help. i really don't want to have to buy a new version of elements or a new computer.

Hi,
Unfortunately the Nikon D3300 requires camera raw 8.4 which is not compatible with PSE 10.
Even worse, the DNG Converter 8.4 will not run on a XP or Vista comtuter.
I don't know if the software that came with the D3300 will run on the XP system but if it does, your only option would be to use it to convert the NEF files to TIF files and then PSE 10 will be able to use the TIF files.
I think that you really need to think about upgrading your system sooner than later.
Brian

TS4180 Issues correcting photo orientation using Windows Photo Gallery

Similar Messages

Maybe you are looking for