TS4185 Blackmagic ultrastudio not working with facetime
Blackmagic ultrastudio not working with facetime, however the audio of the ultrastudio is recognised and can be selected in the source section what can i do to get facetime recognise it? also wirecast virtual camera is detected and recognised by facetime but doesnot work anyway to fix that?
Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears. It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.
Similar Messages
-
After upgrading to Lion internal mic does not work with Facetime
After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.
you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work ! -
Camera not working with FaceTime
camera isn't working with FaceTime, it's frozen... But works with regular camera
Best option is to do a reset (restart) of the iPad to do this press and hold the On/Off button and the Home button, until the Apple logo appears. It will show you the "Slide to power off" just carry on holding the two buttons down until the logo appears and then release and that should have your FaceTime working again with your cameras.
-
Apple ID not working with facetime and messages what to do
I'm not sure when this issue occurred but I cannt use my facetime and messages at all. My apple ID works with everything else but facetime, messages and oh yeah icloud . I have changed my ID like three times and I also looked at my DSM but nothing. I'm frustrated because I live in Trinidad where there is no apple store to correct this issue. Please help someone!!!!!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
Camera not working with Facetime under iOS7
Hello,
My front camera doesn't work since upgrading my iPhone 4S to iOS7. The image is not clear (I just see my shadow)
It was working perfectly under iOS 6.1.4
The front camera is working with other apps like Skype and I can take picture with Camera' app.
I have an iPad and there Facetime works correctly.
Does anyone has the same problem ?
Soft or hardware problem ?
Many thanks for your help.
Kind regards,
SébastienI have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
It all worked fine before the install of ios 7
I have tried reinstalling the software by restoring the phone, but its just the same. -
External usb microphone not working with FaceTime and mac mini with os x Yosemite
Hello
When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
Thanks.
BR StefanInteresting. I don't have a USB mic on the Mac Pro. Its the OLD FireWire 300 iSight. It works for FaceTime calls but not the iPhone call via the FaceTime app.
I also have 2010 MBP that works perfectly, even since the first Public Beta. I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal. I would almost assume that the built-in mic is on the USB bus. How would it be any different than the external USB.
I think I have to agree that this is a point release bug. I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback. The more noise we make through process the more likely to get a fix in the .1 release. -
External iSight camera connected via Firewire adapter 800/400 to a Mac Mini running Snow Leopard - a visual signal comes up for iChat and FaceTime, only sometimes does a video signal comes up for PhotoBooth, always no sound for any of the applications. System Preferences "Sound" shows "Input Level" set around 75%, however only periodically do I see blue bar move, almost like a short in the cable, but the adapter is new. Firewire firmware is v1.0.2. Tried to use firewire updater to get 1.0.3, but updater won't update for Snow Leopard. For being advertized as the world's most advanced OS, seems like Apple OS could at least work with Apple External iSight camera ! Any help much appreciated on fixing the missing sound.
This means that my Firewire 400 ports on the display are no longer supported by the computer?
They need a FireWire connection to the computer. With older computers, the FireWire cable from the display would plug in to a computer FW400 port to provide the connection. With FW800 only computers, you need the adapter. -
My Messages and Facetime applications say my apple ID or password is incorrect when it works for other applications including icloud, and works on the apple id website. I have reinstalled Mountain Lion upon request of an apple advisor but there is still no luck and other apple IDs work on the applications. Why is this happening?
Yes, you will need to call Apple at this point for further assistance.
Apple ID: Contacting Apple for help with Apple ID account security -
Touch tones not working with FaceTime/Handoff Calls in Yosemite
Has anyone successfully used the new Handoffs feature to call into a conference bridge? I've tried and failed a few times now. I hear the touchtone sounds when I enter the numbers on my keyboard but they are not recognized. One service - GotoMeeting - responds back with "You entered zero numbers".
Here is a number you can try calling. +1 (646) 749-3131
If it is responding back to you with "You entered [the numbers you entered]" then I guess it is just happening to me.
Thanks for your help!
---MarcWorks fine on my MacBook Pro (Retina, 15-inch, Late 2013), and iPhone 6 with iOS 8.1.
-
FaceTime HD Camera (Display) not working with most applications
The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
Things I've already tried:
- Shutdown
- Restart
- disconnect/reconnect
- removing power from display
lame, lame, lame. $1k monitor, flippin' webcam doesn't work.I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
-Dsun.java2d.noddraw=true
So it would be like:
java -Dsun.java2d.noddraw=true SwingSet2
That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date). -
why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked
Facetime only works via WiFi. Are you trying to set up Facetime with a T-Mobile account?
-
Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
AbbasHello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR -
I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me...... -
Brand new MacBook Air (June 2013, 8MB RAM, 500GB SSD)
iSight not working with Cisco Webex, Citrix GoToMeeting or Microsoft Lync (error = webcam not detected); BUT iSight works with Skype, Facetime and Photobooth.
3 hours of phone support with Webex - no luck.
Tried SMC and PRAM reset - no luck.
Tried erasing disk and reinstalling OSX 10.8.4 and apps manually with latest versions - no luck.
Apple phone support says it's not Apple's problem because Apple apps work.
Exchanged at Apple Store for another new MacBook Air, again installed apps manually with latest version (not from time machine) - STILL NO LUCK!!!
Is there an update Apple or Cisco, Citrix and Microsoft need to put out for the new MBAs or do I just have 2 lemons???You're welcome.
1wave wrote: ... an external webcam which might be a cheaper alternative ...
It will be interesting to see what the vendors say about using a Mac-compatible external webcam.
If not, some netbook or other Windows® device might offer compatibility at a much lower cost than a compatible Apple notebook.
We will watch for your update(s). What the vendors tell you will be very helpful to others who share this or similar issues with their new MBAs.
Message was edited by: EZ Jim
Mac OSX 10.8.4 -
I am tring to start work I masseg and facetime on my I pod touch 4g on IOS 6 but not work with my apple ID can you help my
Maybe here. You are not really provided much information like what happens when you try.
iMessage won't work after iOS 6 upgrade: Apple Support Communities
Maybe you are looking for
-
Client can no longer see inbox for IMAP
A direct quote from a end user that is using IMAP and outlook. "yep was working fine when i checked in the morning but i check about 6.30, as i checked it flashed up that the server was in off line mode, my inbox was still there i tried to open a ema
-
Any fixes available yet to the 4.3 "upgrade" ??
Like apparently thousands of others, I have had problems with my wifi connection after the 4.3 update. I tried switching off the auto network switch in the advanced settings (that seemed to work for awhile), I tried safe mode with no improvement. The
-
I keep getting a message the program can't start vecause MSVCR80.dll is missing
I cannot open iTunes. I keep getting a message "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem." I have reinstalled iTunes but still have the same issue. I also installed
-
i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.
-
teams administration software · Support display 30 network devices such as routers and switches · Display the network topology structure type tree and access to equipment from this window. · Monitoring of switches including packet errors, temperature