TS4185 Face Time issue with iPhone5?
Using Face Time call from an iPad2 to my iPhon5 doesn't work. Apple IDs are different and checked on both Face Time settings. But both the iPad2 and iPhone5 can face time to an iPhone 4s. Why?
Post in the Facetime for Mac community
Similar Messages
-
Why can´t i use face time call with on my ipod touch with ios6
Why can´t i use face time call with on my ipod touch with ios6
iTech, First change your apple password, than go to 'setting' and than click on 'Facetime' and make sure your facetime email is right than retry. Also calling apple support can help you or the best way is to go down to the apple store for direct help. I really hope that what i have told you have helped and try to reset your iphone.
iTech Support Team -
HT4623 Lost Face Time icon on iphone5 's home page
Lost Face Time icon on iphone5 's home page , how can I get it back ? Already updated to 7.0.2 before loosing Face Time icon
It cannot be too far, as FaceTime is an Apple installed app.
Anyway, try Settings > General > Reset > Reset Home Screen Layout -
Is face time available with iphone 5 UAE version?
is face time available with iphone 5 UAE version which is distributed through apple store UAE?
Hello wjosten,
I actually bought an iphone 5s last evening in QATAR. I was shocked initally when i read your comments in other apple communities. So i bought my phone in QATAR, and i will be using it in China and later in India. Will facetime work in my phone which i bought it in QATAR?
Please reply.... asap -
I have a iphone 5 ...when I face time someone with a iphone 4s....I can see them and hear them but they can not see me. They can hear me but not see me. what is the problem....
diesel vdub wrote:
Was the device actually unlocked by Verizon?
Just FYI, diesel, per an agreement between Verizon and the FCC which allowed Verizon to buy additional spectrum, all Verizon-model iPhone 5, 5C and 5S models are already unlocked.
Regards. -
Hi there , i am a new on iphone , i cant find a face time in my iphone5 ( black 16 GB ) also i have been advised to go to contact and i will find the buttom of face time under the contact details , but i dont. i need your help on that as i need this service to contact my son in USA. Regards, Fathi
If you bought the iphone in the Middle East, then it likely does not have facetime, as many governments in the region do not allow it.
-
Can You Help With Face Time Issue?
I am in Milwaukee for the summer and my wife is in Los Angeles. We both have iPhone 4s. She uses a wifi connection that is 20 MB down and 2 MB up. I am on a much slower wifi connection that's 756 K down and 256 K up. We can face time each other but when we try to use the second rear facing camera (she showing me something in Los Angeles or me showing her something in Milwaukee), I can easily see what she shows me, but my stream to her freezes as soon as I switch cameras. Is this because of my poor upstream connection? Or is there some setting that we can change - or what??? Help appreciated.
BTW, reception and bar issues no problem at all. Better connections sustained in all conditions than previous phones.I agree. You are trying to push megapixel video images through a 256K upload speed. The front camera is lower resolution so it's not overloading the upload speed like the rear camera.
-
When I try to contact someone on face time, it immediately says "failed". It never attempts to connect. Anyone know why this is happening.
Some folks have discovered thatchanging their DNS service fixes FaceTime connection issues. The idealway is to configure your modem/router with DNS service, but oftensettings in System Settings/Wi-Fi on your iPad will override the routersettings.
Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4 -
IOS 5.1 iChat & Face Time issue on iPad 2
After upgrading to iOS 5.1 the system ask me to sign in for sing Face Time and iChat. I entered several times my apple ID and password but I can't log in and the application takes me back to the log in page with no specific message.
I've check my Apple ID and password and they are correct (I even changed my password). Does anyone know how to solve it?
Thanks in advance,
RESVUPDATE:
I had 27 Gigs free on the iPad, so it wasn't a memory issue, it was some Apple issue.
I took my iPad to work and tried connecting there through the wi-fi at the office, and it connected and uprgaded fine.
So if you are reading this because your IOS can't download, try;
1) use a Windows/PC machine, as it seems more reliable then macs for this download/upgrade
or
2) try different w-fi locations to have the device upgrade itself through its own Settings > General > Software Update -
When I turn on Face Time in my Mac Mini with 10.7.5, it works fine except when I try to put it in landscape mode in the View menu. The command is there but in non-functional light gray. I have a Samsung monitor and logitech cam which work fine with Skype. Is there any way to activate the "landscape" command?
"FaceTime
Video calls require a built-in FaceTime camera, an iSight camera (built in or external), a USB video class (UVC) camera, or a FireWire DV camcorder; and a 128-Kbps upstream and downstream Internet connection. Making HD video calls requires a built-in FaceTime HD camera and a 1-Mbps upstream and downstream Internet connection. Receiving HD video calls requires a supported Intel-based Mac."
http://support.apple.com/kb/SP629
(If that's what you're wondering about...).
Stefan -
Reponse time issue with a simple qurey .
hi all,
i started facing a strange issue with the below query form the biging of the month. we have a DW system for a banking domain and in that our accounts table from the first of this month is taking a huge amount of time to retive the data. if i query a back dated data say 31st of may that would be '310509' it give the result in less that 5 seconds. this is a very simple query which i am joing with a transaction table.
i assume the reason for the change in query reponce time is may be tha data from the beging of this month had a datablock extantion and this block is corrupted . kindly let me know what i am thinking is correct or there is another reaosn for this.
Also let me know what resolution should i take to resolve this issue.
my database version is Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
Thanks in advance
SELECT * FROM
(select * from gtxn_dtl_v1 where batch_id='070609') a,
(select * from gacc_dtl_v1 where batch_id='070609') b
WHERE a.account_number = b.id
SELECT * FROM
(select * from gtxn_dtl_v1 where batch_id='310509') a,
(select * from gacc_dtl_v1 where batch_id='310509') b
WHERE a.account_number = b.idHemant K Chitale wrote:
I don't think that it is a simple query.
The two objects "gtxn_dtl_v1" and "gacc_dtl_v1" seem to be Views. So, the queries are probably involving joins of other tables.
Without an Execution Plan and information about table and index definitions and statistics on the tables and indexes, any attempt to answer your question would be meaningless.Both are tables. Explain plan is shown below:
SQL> explain plan for
2 SELECT * FROM
3 (select * from gtxn_dtl_v1 where batch_id='070609') a,
4 (select * from gacc_dtl_v1 where batch_id='070609') b
5 WHERE a.account_number = b.id;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 4236620027
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 601 | 38 (0)| 00:00:01 |
| 1 | NESTED LOOPS | | 1 | 601 | 38 (0)| 00:00:01 |
|* 2 | TABLE ACCESS BY INDEX ROWID| GACC_DTL_V1 | 1 | 313 | 4 (0)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | IDX_ACC2_V1 | 1 | | 3 (0)| 00:00:01 |
|* 4 | TABLE ACCESS BY INDEX ROWID| GTXN_DTL_V1 | 1 | 288 | 34 (0)| 00:00:01 |
|* 5 | INDEX RANGE SCAN | IDX_TXN2_V1 | 55 | | 8 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - filter("BATCH_ID"='070609')
3 - access(SUBSTR("BATCH_ID",1,6)='070609')
4 - filter("BATCH_ID"='070609' AND SUBSTR("GTXN_DTL_V1"."BATCH_ID",1,6)='070609')
5 - access("GTXN_DTL_V1"."ACCOUNT_NUMBER"="GACC_DTL_V1"."ID")
filter(SUBSTR("GTXN_DTL_V1"."ACCOUNT_NUMBER",1,3)=SUBSTR("GACC_DTL_V1"."ID",1
,3))
22 rows selected.
SQL> explain plan for
2 SELECT * FROM
3 (select * from gtxn_dtl_v1 where batch_id='310509') a,
4 (select * from gacc_dtl_v1 where batch_id='310509') b
5 WHERE a.account_number = b.id;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 1249675553
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 601 | 785 (1)| 00:00:10 |
| 1 | TABLE ACCESS BY INDEX ROWID | GACC_DTL_V1 | 1 | 313 | 4 (0)| 00:00:01 |
| 2 | NESTED LOOPS | | 1 | 601 | 785 (1)| 00:00:10 |
| 3 | TABLE ACCESS BY INDEX ROWID| GTXN_DTL_V1 | 104 | 29952 | 368 (2)| 00:00:05 |
|* 4 | INDEX RANGE SCAN | IDX_TXN1 | 104 | | 340 (2)| 00:00:05 |
|* 5 | INDEX RANGE SCAN | GACC_DTL_V1_IDX | 1 | | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
4 - access("BATCH_ID"='310509')
filter(SUBSTR("GTXN_DTL_V1"."BATCH_ID",1,6)='310509')
5 - access("GTXN_DTL_V1"."ACCOUNT_NUMBER"="GACC_DTL_V1"."ID" AND "BATCH_ID"='310509')
filter(SUBSTR("GACC_DTL_V1"."BATCH_ID",1,6)='310509' AND
SUBSTR("GTXN_DTL_V1"."ACCOUNT_NUMBER",1,3)=SUBSTR("GACC_DTL_V1"."ID",1,3))
21 rows selected.
Indexes:
select i.index_name,index_type,i.table_name,num_rows,column_name,COLUMN_EXPRESSION
from all_indexes i,all_ind_columns c,ALL_IND_EXPRESSIONS e
where i.table_name in ('GACC_DTL_V1','GTXN_DTL_V')
and i.index_name = c.index_name
and e.index_name(+) = i.index_name;
INDEX_NAME INDEX_TYPE TABLE_NAME NUM_ROWS COLUMN_NAME COLUMN_EXPRESSION
GACC_DTL_V1_IDX NORMAL GACC_DTL_V1 57190895 ID
GACC_DTL_V1_IDX NORMAL GACC_DTL_V1 57190895 BATCH_ID
IDX_ACC5_V1 NORMAL GACC_DTL_V1 34524304 POSTING_RESTRICT
IDX_ACC1_V1 NORMAL GACC_DTL_V1 55919578 CATEGORY
IDX_CUS5_V1 NORMAL GACC_DTL_V1 54461378 CUSTOMER_NUMBER
IDX_CUS6_V1 NORMAL GACC_DTL_V1 3272052 LIMIT_REF
IDX_ACC3_V1 FUNCTION-BASED NORMAL GACC_DTL_V1 52940894 SYS_NC00099$ "CUSTOMER_NUMBER"||'.'||"LIMIT_REF"
IDX_ACC4_V1 FUNCTION-BASED NORMAL GACC_DTL_V1 57238600 SYS_NC00100$ "CUSTOMER_NUMBER"||'.000'||"LIMIT_REF"
GACC_DTL_V1_IX2 FUNCTION-BASED NORMAL GACC_DTL_V1 54448627 SYS_NC00101$ SUBSTR("ID",1,3)
IDX_ACC2_V1 FUNCTION-BASED NORMAL GACC_DTL_V1 55566106 SYS_NC00102$ SUBSTR("BATCH_ID",1,6)Edited by: user577300 on Jun 10, 2009 11:41 PM
So many strange things here:
1.Query showing cost 38 is taking a long time (hours). Other quey takes 5 sec
2. Plans are different. -
Execution time issues with SU01 demo script
Having worked with Scripting in a Box for a while now I wanted to try out the examples there. I read FM: SO_USER_LIST_READ or another one explaining why my attempt to narrow the returned users failed (Craig, did you find out why the functionality was removed?) and Re: Issue with "Scripting in a Box" seeing that Harry had the same problems with only ~200 users in his system. However, Craig's original post states he successfully managed with over 400 users. I'm a bit confused...
I included some simple timing stuff and found out that processing of one user in the loop takes about 1.7 seconds - little surprise then that every script times out. This seems to be due to the additional calls to GetStatus() and GetValid() - by commenting them out I get the whole list rather quickly.
Unfortunately commenting them out also means no nice icons for 'Status' and 'Valid', which is not desired. I probably could create a Z FM to deliver me the userlist with these two fields already added (which would save on rfc-calls, assuming the operation is much quicker on the server directly), but I hoped to get a solution based purely on PHP, not own ABAP coding (being aware that Craig also used a Z FM anyway, but still...)
I'm a bit unsure now how easy it is to actually create useful frontends in PHP, with such long execution times. I assume this will happen in other occasions as well, not only for user lists. Is there an alternative? Or a general way to do those things quicker?
:Frederic:Craig: you say it's easy to go from 1.7 seconds per user lookup down to a small fraction of it? Then apparently I'm lacking these skills. Could you please give me a hint what should be done there?
I though about creating a Z function, but having to write custom wrappers - possibly for about any transaction in this style - I wanted to avoid.
Bala: the two functions only take one user as input, not a list. So w/o modifying the ABAP side I can't feed the whole list in there. I wonder how much it would improve the result time anyway, so perhaps I'm trying it. It's just not a solution I'd prefer.
Paging is a good idea, the actual call to get the whole userlist is quite quick. Having like 20 users displayed at a time is manageable - still slow, but the script won't timeout anymore. I think I'll implement this today.
About AJAX: yes, I want to play around a bit with AJAX, however having the two columns valid and status removed and the information only displayed on mouseover etc is a bit like cheating. And 1.7+ seconds waiting for a hoover info is too long. So I'd like to optimize on the rfc-calling side primarily.
Craig: surely it was just a demo, and I'm just trying to get it to work for understanding it
:Frederic: -
We're upgrading a bunch of apps from CF5 to CF7. We've run
into an issue with cfwddx that results in times coming across with
one hour subtracted - this didn't happen with CF5. Basically I'm
packetizing query results with an action CFML2JS. If I just dump
that packet via something like alert(mypacket.value) I can see that
the date is intact. However, if I break it down via WDDX2CFML then
run a cfquery against it, the datetime fields are all coming back
one hour short, i.e. 10 PM instead of 11 PM. I'm suspecting I need
to manipulate the usetimezoneinfo property of the serializer
object, but I'm not sure how to do that - at any rate, is this a
known problem with CF7? Any suggestions at all on how to get around
this would be greatly appreciated!
Regards,
Al
P.S. I'll be happy to post code if that's required.Very same thing here. Iphone 5C on 7.0.2 from tmobile in NC.
time is frozen when auto lock is engage. Both manual and automatic settings failed to help.
Tried the LTE trick, tried the reset network trick... -
New ipad mini face time issue"unable to verify email because already in use"
My daughter had to get a new iPad mini because her battery went out. Now when she tries to face time with the new mini it says "unable to verify email because already in use". Any suggestions on how to correct without having to create. New email address? I'm a novice Apple user. Thanks for the help headed on a 3 week trip and want to be able to FaceTime with family back home.
Hi there,
It sounds like you may have more than one Apple ID that shares the same email address. I would recommend taking a look at the article below for more information on how to get this resolved.
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/ts3510
-Griff W. -
What operating system is face time compatible with?
I have an older Macbook version 1-.6.8 Mac OS X. Can I run face time on it?
The minimum operating system for Facetime for Mac is 10.6.6.
If you mean you have 10.6.8, it will work quite well with FT.
Wuz
Maybe you are looking for
-
what is the standared T.code to see the list of deliveries with the following fields. Sales order No, Sales order date, sales order quntity, Delivery quntity, DELIVERY DT SOLD TO PARTY DESCRIPTION TYPE OF ORDER Thanks, Tulasi
-
How do I find my external hard drive capacity?
I've just bought a Brand New Western Digital 1TB My Book Pro Hard Drive. However, now that it's hooked up when I look at it 'Get Info' it tells me the following Capacity 465.75 GB Avaliable 421.57 GB Used 44.18 GB This doesn't look right to me - How
-
I CAN,T OPEN PDF FILES IN PAGES WHICH ARE ATTACHED WITH EMAIL OR CAN,T SHARE PDF FILES WITH PAGES
-
How to change the Callback function of a GUI button?
I would like to change the callback function associated with a GUI button dynamically in the programming way. Here is the code piece I tried, but it does not seem to work: const char* pstrLabelSaveJpeg = "SaveJpegCb"; SetCtrlAttribute(pahel_id, ctrl_
-
Hi, I recently tried to fix my git and, after determining the issue was I didn't have PCRE installed, I installed it. Well git works, but nothing else does. I can't run any programs, I always get the following error message: geddit: error while loadi