TS4185 FaceTime on my iPad stopped working, won't connect calls.
FaceTime on my iPad has been working fine for 2 years. Now, when we call or someone calls us, it says connecting…. and nothing happens. WiFi, camera, recent updates are all on and working. Messaging works fine. Just won't connect a call. Any suggestions?
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. Sadly, we have to wait for Apple to provide some sort of update/fix. You can leave feedback for Apple at the link below.
http://www.apple.com/feedback/
Similar Messages
-
Microcell stopped working won't connect
That's good. They might not send the ac adapter with it though (they quite often don't on replacements). Just make sure you use the correct adapter with whichever MicroCell they send you. The power ratings are listed in the Tech Guide (link in my sig). You never did say what kind of internet service you had or who it was with. We ask because the MicroCell does not work reliably with satellite or WiFi internet connections, which is stated in the instructions. It is designed for land-based internet only.
I've had a microcell for about three weeks. This is my second one, I have another in another location for about 18 months so I'm familiar with them. (This one is a black one if it matters, the other is the white one.). The microcell worked fine for three weeks and today stopped working. Only the bottom two lights -- power and Ethernet -- are lit up. I followed the trouble shooting guide to unplug wait 10 seconds and repower and it didn't change. I deactivated and sought to deactivate but it is stalled on the first step -- trying to connect to AT&T. I have tried different ports in the router with no success; other devices run through the router just fine (wired and wireless). Won't activate. I have basically no cell coverage without this so am really in a bind. Any suggestions?
-
AppleTV Stopped working - won't connect to my Mac/iTunes
Purchased AppleTV 3 days ago. Worked flawlessly. 2 hours ago, storm winds caused the power to blink in the other room (causing the Mac to shut off). The modem lights indicated it was powered up.
Since then no amount of troubleshooting will restore proper function:
I tried turning Home Sharing off and back on.
I have restarted the unit, restarted itunes, restarted my Mac (the computer is functioning normally).
I attempted to restore the AppleTV OS, but it won't connect to the internet.
I reset AppleTV and re-entered my ID and network settings (I can't login to Apple Store and "Setting date and time" goes on to infinity).
What else can be done about this?I shut down to do some maintenance on my Mac (air-dusted the interior), now AppleTV will not connect - I turned 'sharing' off and on, made sure iTunes wa running, turned my modem off and on. I resorted to resetting AppleTV, still am stuck at 'Setting date and time'. What does reset router refer to, my computer? I normally connect to network via Ethernet 2 on my Mac.
-
My Ipad stopped working and won't turn back on.
My ipad stopped working suddenly and won't turn back on. What can I do to turn it back on?
Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My iPad stopped working and I turned it off,and now after charging it won't turn on!It shows the apple logo that's all...What to do?
Have a look at the following document, I believe your iPad's condition is explained at its end:
http://support.apple.com/kb/TS3281 -
FaceTime and iMessages have stopped working since i updated to 7.0.3, saying there is a network error and to try again later. Have tried reinstalling Find my iPhone to see if it works. It doesn't for me. The message says "FaceTime (iMessage) Activation: Could not sign in. Please check your network connection and try again". My network is perfectly alright as I keep buying on the App Store. can u please help out???
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset. -
TS3274 ipad stopped working and shutdown will not restart
Ipad stopped working and shutdown will not restart. I synced and updated system software about an hour before problem started. The Ipad had about 60% battery life remaining when it went dark.
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I sent and email and my ipad stop working. I pluged it up becuase i thought it was out of power but I can't get it back on. I though the screen was broken but when I plugged it into the laptop it never register. I can't figure it out someone help
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.
-
My ipad stop working,i forget the password..help plz
my ipad stop working,i forget the password..help plz
You won't be able to take a new backup if you can't remember its passcode
Follow the instructions on this page : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support -
I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68
HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.
Hi,
Can you pls. provide more details of the issue?
OS/Platform
It would be great if you can provide the MSI logs for repair from the %temp% directory.
Thanks, -
Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.
Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
My FaceTime HD camera has stopped working on my 2013 11" MacBook Air.
Recently, my FaceTime HD camera has stopped working. The green LED indicating that it's on will turn on for a second, then turn off. The camera is never activated, and it constantly repeats this cycle. I contacted Apple for help after I had tried repairing permissions, resetting the SMC, and reinstalling the OS as a last resort. I don't know what to do at this point. I'm running Mac OS X Mavericks, and the camera had no problems with the OS. The camera has just suddenly stopped working. Can anybody please help?
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4 -
My I Phone 4s stopped working/ won't even turn on. What should I do?
My I Phone 4s stopped working/ won't turn on. What should I do?
Hello guyster1707
If you are having issues wit your iPhone turning on, check out the articles below to get it to power back on and working again. It will walk you through checking the power adapter and cable.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Regards,
-Norm G.
Maybe you are looking for
-
First I would love a dynamic client example that actualy used the wsdl type generated by Workshop. BEA's example is using the "URN:" format not using their own format. I havent been able to get the example dynamic client to work yet against their gen
-
Wireless Keyboard Page Up and Page Down Help
The wireless keyboard for my iMac omits many common keys found on full size keyboards. One application I am running (Battlefield 2142) requires the use of "page up" and "page down" among others. By random effort, in happens that "Control" + "up arrow
-
Toplink JPA 2.0 migration in JDeveloper 11.1.1.2.0
I would like to used Toplink JPA 2.0 in JDeveloper 11g, how to update toplink_111120_en.zip in JDeveloper IDE.? Even I added eclipselink and JPA 2.0 spec lib into classpath, I am still getting compile time error on orphanRemoval attribute in OneToMan
-
JMS resource not located when starting Weblogic 8.1 as windows service
I have a Weblogic 8.1 cluster which I am trying to configure as a Windows service. The managed servers startup up without errors when started from the command line, but when I start it up as a service they do not seem to find the JMSConnect
-
Appointments synced over iCloud between iphone 4s macbook air and iMac have been tripled on all three devices. Anyone have this experience or a solution?