TS4214 It still auto locks when connected to power!

This article appears to be incorrect in the suggested resolution...

Welcome to the Apple Community Tony.
Are you able to try another remote.

Similar Messages

No light showing on my Apple Tv when i connect power lead. I have restored ATV with I tunes but still no luck when connected to power.

No light showing on my Apple Tv Unit when connected to power source. I have restored and updated via i tunes light comes on whilst in this mode but as soon as i connect power cable and plug in nothing happens?

Welcome to the Apple Community Tony.
Are you able to try another remote.

Automatically disable auto lock when connected to charging device?

Hello,
I am aware that you can disable auto-lock in the settings by selecting 'never.'
Is there a way the auto-lock feature can be disabled automatically when the iPod Touch is connected to a power source like a dock, car charger, etc?
It's a pain to have to change this setting each time I get into the car, and when I forget, it has the potential to become a safety issue. (Of course, I would never mess with my iPod settings while driving...)
Perhaps a 3rd party app that does this??
I've seen this question posted on various forums, but have never seen a good answer...

Hello Ats65,
Make the pairing again and make the device update with system update
Also check another Bluetooth keyboard if available.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

AUTO START WHEN CONNECTED

AUTO START WHEN CONNECTED In Backup, NAS to USB AUTO START WHEN CONNECTED: What does this actually mean, in BACKUP of Dashboard? Will it auto sync every time a change takes place on the NAS? Or must the USB be removed and reinserted into the USB port on the MCM?

No, the clue's in the name It's a one-off single process, just triggered by the drive connection rather than by manual starting via the dashboard. When you connect the drive, it will trigger the backup, which will then proceed to the end and stop just as if you had manually started the backup. But at the end, if you want to backup again, you have to either manually restart it or disconnect and reconnect the drive. As it stands today, there is no "auto sync" option within the dashboard between the built-in drives and USB connected ones. It can be set up using SSH and a cron job, but that will be messing aroud with the NAS at the base command line level and will probably invalidate your warranty if things go wrong. Have a look through the suggestions thread as this kind of question (sync'ing in general, not specifically NAS<>USB) comes up quite regularly and has probably been made there, where you can support it and comment yourself.

Iphone not auto syncing when connected

i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens.
when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

I've always had to open iTunes, then plug in phone for it to see it. I've never been able to just plug in my iPhone and watch iTunes get pulled up automatically like with my iPod. I just figured this is normal.

My MacBook Pro will not powerup (even when connected to power supply).

My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy

Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

Why would my iPod show a full battery when connected to power but when not connected it will no longer turn on

For both
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MBP shuts down when connecting to power

Since a week or two, my MacBookPro from early 2011 shuts down when connecting the magsafe to power. Also when starting up again it will start up fine and fast from battery, but I need to hold the power button for several seconds when connected to power.
Another problem I had earlier as well is CPU (kernel task) of over 90%, which I now see clearly, only occurs when connected to power. I used to solve this problem by putting the MBP to sleep, but now, when put to sleep, it will shut down.
When on battery, I have no CPU problem and can put machine to sleep without a problem.
I recently started uploading everything to dropbox, and activate caffeine to make sure it will keep uploading. My computer will run for days on power combined with caffeine, but is as slow as **** because of a >90% CPU.
The battery has had a notification for maybe a year, that it needed service, so today I finally bought and installed a new battery, but the problem is not solved. Is this software or could it be my magsafe adapter? Thanks for you help.

It sounds like a problem with the power management inside your MBP. I suggest you call Apple to make an appointment at your local Apple store for them to check it out for you.

21 September, 2014: MD513AE/A iPad Wi-Fi-16GB White - Model A 1458 I have purchase this from Dubai, UAE, some 2 years back. ---- I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.

21 September, 2014, from India.
MD513AE/A iPad Wi-Fi-16GB White - Model A 1458
I have purchase this from Dubai, UAE, some 2 years back.
I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.
After some times the ‘Apple’ icon comes in. Tried simultaneous operation of Sleep and Power buttons, but of no use.
Sometimes a picture of cable and ITunes comes in; but not able to connect to
P C as there is no battery charge.

Hi madhu254,
Thank you for visiting Apple Support Communities.
If your iPhone is not charging, please check out this article.
iPhone and iPod touch: Charging the battery
There's a Resolving issues section, but you may want to read it all.
Best regards,
Nubz

My ipod touch is completely unresponsive. Will not turn on at all even when connected to power???? HELP!!!

ipod touch completely unresponsive. will not turn on at all even when connected to power source. is it dead????

After charging for at least an hour reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connect the iPod to your computer and see if iTunes sees the iPod. If it does try restoring the iPod via iTunes. If it is not visible try the following to make it visible:
--- Place it in recovery mode via:
iPhone and iPod touch: Unable to update or restore
--- Place in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

My Macbook Pro ran out of battery last night and wouldn't turn back on even when connected to power for a period of time. However, when I woke up, it did turn on. Is there a reason this happened and should I get it looked at?

Last night, I was watching something on my Macbook Pro and it died (out of battery). I went to plug it in and waited a couple of minutes to try and start it back up. However, when I connected the power source the light was green, which could not have been the case since I know 100% it was out of battery. I proceeded to hold the start button for a long period of time, but my computer made no noise and refused to turn on - it looked like for all intensive purposes it was dead. I left it alone overnight praying that it would be alright in the morning and luckily, when I opened the computer this morning it was restarted and fine. I'm concerned because I've had this happen to me a couple of times and while it always turns back on, I feel like there is a bigger issue that I need to get addressed. Can anyone help me with this? Any ideas? Thank you!

Apple Does Not recommend that. Please Read.
http://support.apple.com/kb/HT1490
From that article
"Portables with built-in batteries"
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
MacBook
MacBook (13-inch, Late 2009) and later
MacBook Air
MacBook Air (all models)
MacBook Pro
MacBook Pro with Retina display (all models)
MacBook Pro (13-inch, Mid 2009) and later
MacBook Pro (15-inch, Mid 2009) and later
MacBook Pro (17-inch, Early 2009) and later
Thanks.
Allan Mac wrote:
Apple recommend calibrating the battery when you buy a new Macbook and then every few months, or monthly if it used on mains all the time. This, as Apple says is to keep the battery operating at maximum efficiency. When the battery discharges and shuts the macbook down, it still has reserve power for a good number of hours. There is also a logic board battery to hold various settings.
I rather think I will take Apples advice on using their equipment not yours, but I would be intrigued to discover what is it you know that Apple doesnt about its batteries?
Allan

Restored Ipod Malfunctioning when Connecting to Power

Hi all, i am hoping that someone can help me out with the following issue. Any help would be much appreciated.
I recently restored my iPod and when it prompted me to connect the iPod to the power via the apple power socket i did so. The Apple logo appears and then the status bar appears at the bottom. The bar gradually fills and once it reaches a full state the iPod resets and goes through the same sequence again.......and again.......and again. I left this for a couple of hours but it kept going and going so i left it over night and it still continued.
When i disconnect it from the power it shows the logo prompting me to reconnect it to the power. If i leave it then the iPod turns off. When i turn it back on it prompts me to connect to the power again. When i do it goes through the same motions as before.
When i connect it to my laptop (windows) nothing happens. It doesn't turn on, the computer doesn;t recognise that anything is installed.
When i try and reset the iPod using the menu and selct buttons then it resets and does the same things again.
Can anyone at all help me out in anyway possible. Your help would be very much appreciated.
Many Thanks.

my fourth gen ipod is doing pretty much the same thing. Did you recently downloan and update to the new version of itunes? That seems to be the cause.
Anyway, a day after I had your problem the ipod discharged all energy and won't do anything... no apple symbol, no battery charge symbol... nothing. It doesn't even make the noise like it's trying.
To quote Ben Folds:
"She's a brick..."
And mines so old I imagine if I ever get to an apple store (2.5 hours away) they ain't doing squat for it.

IPhone 4 will not charge when connected to power

I have tried the home/ power trick and at first it went to the apple logo then would power up and then cycle off and then repeat infinitely. Now the phone is so low on power that it only shows either the lightening bolt while connected or the cord + lightening bolt when not connected to power. It is still not charging though. I left plugged in overnight and still no change.Help please

If not a problem with the power adaptor or cable being used, more than likely the iPhone has a hardware problem with the battery or something else. Make an appointment at an Apple store if there is one nearby.

MacBook will not turn on, quite clicking sound when connected to power

I cleaned my MacBook with a damp cloth and now the MacBook will not boot. the first time I turned it on after I cleaned it. it turned on and the screen came on the grey apple loading screen, went away for a minute when I came back it had turned itself off.
Now when I press the power button it will not do anything at all, nothing turns on it is as it is dead. I have left it outside in the sun for a couple of days incase any water got into the machine but it still will not turn on.
When I connect the power cord to the MacBook the is a faint clicking sound coming from it.
This machine is about 3 years old so it is out of warranty.
Any suggestions to what it could be ?

This same thing just happened with mine - the clicking sounds like it's coming from the left speaker. I tried an smc reset and also took a look at the logic board to look for anything I might notice. What was the outcome for you - any info would be very helpful!

Satellite L650-12Z: Led does not light up when connected to power source

My L650 does not show the white light anymore when the cable is plugged in.
The connectors are clean, and the adapter is working.
The laptop does still run on the battery ( when there was still power in it).
Also without the battery, there is no white light indicating that the laptop is connected to the DC.
Does anyone know what the problem could be and how to solve it?

Thanks for your reply.
Unfortunately the battery does not charge when connected.
Only when connected with the full battery it is working.
I have measured the adapter with my multimeter and it seems to be working properly.
Like you said, letting a technician look at it would be a smart idea.
I decided to send it to a service center in my city, in about 4 weeks I would have the notebook back they said.
Weird thing for me still is, that around three weeks ago the same happened. Windows said the power was not connected. But after plugging the power in and out a few times it worked again. Maybe this is a symptom of something?

TS4214 It still auto locks when connected to power!

Similar Messages

Maybe you are looking for