TS4268 I can send imessages through all numbers and emails but my own, anyone else have this problem?
When I am trying to chose who can send and recieve imessages on my iphone, my number is grayed out and is not an option, but they will send to my email or my moms iphone
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Cheers, Tom
Similar Messages
-
I can recieve emails but cannot send emails through my iPad for my Comcast email account. I believe I have all setting aligned properly. Anyone else have this problem?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Cheers, Tom -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?
You don't swipe but actually press, hold and push up.
-
I can't access my Numbers documents now that I have OS Mavericks 10.9.3. It says I need to buy an upgrade for 19.99 to access them. Anyone else have this problem?
If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
If you clean installed, look for your old install disks for iWork and reinstall.
They will run on Mavericks but they need to be there. -
I've been "updating" GarageBand for 4 days. I know it's a huge download, but I've had other that sailed through. Anyone else have this problem?
Help! I thought my problem w/ updating garage band was over--but it's not. I'm still stuck. Now I get a msg that the app won't update. And I can't even access it at all. Obviously, I do not know what I am doing. Would some wise kind soul have pity on a dumb blonde old lady and help me w/ this?
I will be most appreciative for any help.
I await your instructions...
Thx
Nancy -
Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?
This doesn't seem right.
I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
My wife started watching the movie the next night and got about half way through.
The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832� -
Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?
Installing IOS 8 on my iPad slowed all the functions significantly, anyone else have this problem?
There are many people experiencing the same with the iPad 2 and the iPhone 4S. The hardware in these devices is barely adequate to run iOS8. You can look for obvious menu settings (like turning off or minimizing background app refresh) but there is no getting around the fact that these two devices are barely up to running iOS8.
-
The sound on all of my game apps and my alerts has stopped working. Still works for Netflix, Hulu, YouTube... Anything video related. Anyone else have this problem or know what I should do to fix it?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
it has been 24 hours and Siri still doesn't want to take any commands anyone else have this problem too? and how can I fix it? she just keeps saying there is something wrong and to try again later. I didn't buy this phone to be jipped on any features.
Mine wasnt working either but i saw in another thread that you should try Settings>General>Reset>Reset All Settings. Ignore the warnings, all your settings have to be changed back but you dont lose any media or data, you just have to put your background back and location settings. It fixed Siri for me but dictation still doesnt work. Hopefully it works for you :-]
-
Can't use HT x 3 on Diamond board, anyone else have this problem?
No matter what I do I can't use the HT multiplier of 3, works fine at 4 and 5 but 3 just give me a no boot up. Anyone else have this problem?
Quote from: K6dude on 09-May-06, 00:05:39
Hi,
If your BIOS was based on version 5.XX then you might like to try version 1.9/3.9 as when I tried that BIOS 3x didn't work either....come to think of it, neither did a few other things!
In fact that BIOS you are using is one that I have not ever seen for the 7100 series, where did you get it? ...and are you sure it is for the SLi version of the board and not for the 7125/Ultra chipset?
Regards
K6dude
The Bios is available from the Diamond Club so its for my board. I have to date tried Bios V1.7, 1.9 1.A1 and 50C and none of them allowed me to use HT x 3.
Tiresmoke, would you mind sending me a pm of your settings? It may give me a clue as to what the problem may be. Cheers. -
I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?
Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
My iphone 3g wont load all comments from online newspaper. when I touch the "load more comments" button the little spinning spiral appears then nothing happens. Anyone else have this problem with some online newspapers?
Anything?
-
Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
I just installed Adobe InDesign CC 2014 and now I can't scale objects/type using Command+Shift Key. Has anyone else had this problem and if so, any solution?
There is a conflict with third party software or your system keyboard shortcuts. Lately, there have been many postings about conflicts with Chrome extensions so check there first.
It's not a new problem. I wrote about it on InDesignSecrets.com in 2006:
The Missing Keystrokes Mystery | InDesignSecrets
Maybe you are looking for
-
Hi, i am using NetBeans IDE 5.,5 and trying out the NewsApp tutorial for Entity beans. When i run the project I get the following error, How shall i fix this, Thanks in advance. deployment started : 0% Deploying application in domain failed; Internal
-
Print PO Form before Release PO
Hi Expert, I have some problem Print PO Form. PO cannot print automatically before release PO. (Not release yet) How can I do ? Thanks,
-
Users Cannot Connect to Report Manager
Hello all, I've done some searching and tried a few things, but nothing has worked. I recently started working with SSRS and created two reports. I deployed them to the server, but when I type in http://servername/reports in a browser, I get the hom
-
I have a Final Cut project which I have assembled from .mov video clips. The clips are 16:9 (640x360), but when I render them they show up in the canvas with black bars above and below, even though I have the sequence settings set to 640x360. When I
-
Hi Folks, I've got a simple terminal command...hamachi start...that I would like to run as LaunchAgent plist file or as an executable file triggered by a LaunchAgent. For the former I currently have: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE p