TS4268 i keep getting message that cant be set up - check network connection. went to Apple store. they could not set it up and referred me to this article which also doesn't solve problem. Keeps getting network message, even in apple store.  Help!!!!

I keep getting message to check network connection when i try to use face time or imessage. Went to apple store. They could not fix it and referred me to apple support which sent me an article to do the things the store had already tried. Store thinks it is a problem with the ID although the correctID and  p/word are being used. Just get message that cant sign in and check connection and try again. Happens in every location. Can anyone help me with this since Apple  can't?

Since you've tried the Apple Store, etc., even though you say your Apple ID and password are good, I suspect that's the likely issue.
I recommend double checking that with Apple.  This link might help:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Similar Messages

  • What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

    What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

    Kirby Krieger wrote:
    Hi Shane.  Not much in the way of thoughts - - but fwiw:
    How is the drive attached?
    Can you open large files on the drive with other programs?
    Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
    Can you reformat the drive and try again?
    Hi Kirby,
    I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
    Thanks,
    Shane

  • When I try to reply to an e-mail, Iget the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    When I try to reply to an e-mail, I get the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?

    Try this. Sometimes this is all that you need to do to fix that issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
    Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

  • LR5 won't import photos Ijust took.  Keeps coming up:"The following files were not imported because they could not be read."  And it's ALL the photos.  never had this problem be4.  what gives?

    Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives?  Using an SD card, its a 64GB 600x Speed .  I'm on a Mac 10.8.5; iPhoto has no problem importing them.

    In order to see the windows that show sharing and permissions I gave you above, you have to right click on the the item, e.g. folder, HD, etc., and this window comes up.  Then you right click on "Get Info" and the windows with S/P pop up.  In LR%, if I right click on Destinations folder, this is what comes up:
    There is no option to "Get Info", and if I right click within Destinations folder, this is what comes up:
    Still no "Get Info".  If I click on the specific file (in this case "2015), this is all I get:  Last thought, yesterday out of desperation, I called the Apple store.  I am operating on Mountain Lion operating system, and Yosemite is the latest (as of 10/14).  The manager suggested that if there had been an update in LR5 that was now only compatible with this later system, maybe that was the issue and I should consider updating to Yosemite.  I had no problem downloading photos as of 9/14, but don't think I've done anymore since their update….when was the last LR5 (I'm using LR5.7 currently)?   Do you think this might be the problem with permissions?

  • Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

    Im trying to get some purchased songs to sync onto my ipad, but when i try it says they could not be synced as i need to authorise my computer which has been done already but its still not syncing them can someone help please?

    Hello there, Gemss.
    The following Knowledge Base article offers up some great recommendations for the issue you're describing:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Although all of the scenarios may be applicable, many folks find that the following section helps resolve their issue most often:
         Authorize using the correct account name
    The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
    Select a purchased song in your library and choose File > Get Info.
    Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
    Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
    If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
    If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

    I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?

    According to this forum post from the time of the shutdown, it is only those directly affected.
    Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
    Here is a list from that link
    If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable.  The specific affected products are as follows:
    Acrobat 7.0 - Windows
    After Effects 7.0
    Audition 3.0
    Captivate 1.0
    Contribute 2.0
    Contribute 3.0
    Creative Suite 2.0
    Director MX 2004
    Dreamweaver MX 2004
    Fireworks MX 2004
    Flash Paper 2.0
    Freehand MX
    GoLive CS2
    GoLive 9.0
    Illustrator CS2
    InCopy CS2
    InDesign CS2
    Macromedia Studo MX 2004
    Photoshop CS
    Photoshop CS2
    Photoshop Elements 4.0
    Photoshop Elements 5.0
    Premiere Pro 7.0
    Production Studio Premium

  • Help to fix the error message in proc? I could not understand the error and how to fix this issue?

    error
    19e529fd-3785-410e-ad4e-f4c8542ade52 2014-03-17T21:40:59.079Z err { message: '@D
    efault is not a parameter for procedure sp_Address_UPDATE.',? type: 'alert',?
    stack: 'Error: @Default is not a parameter for procedure sp_Address_UPDATE.\n
    at TDSStream.onRequestComplete (c:\Projects\caa-api\lib\data\tedious\TDSS
    tream.js:67:11)\n at Request.callback (c:\Projects\caa-api\node_modules\t
    edious\lib\request.js:24:27)\n at PooledConnection.Connection.STATE.SENT_CL
    IENT_REQUEST.events.message (c:\Projects\caa-api\node_modules\tedious\lib\
    connection.js:198:29)\n at PooledConnection.Connection.dispatchEvent (c:\Pro
    jects\caa-api\node_modules\tedious\lib\connection.js:465:59)\n at Messag
    eIO. (c:\Projects\caa-api\node_modules\tedious\lib\connection.j
    s:419:20)\n at MessageIO.EventEmitter.emit (events.js:92:17)\n at MessageI
    O.eventData (c:\Projects\caa-api\node_modules\tedious\lib\message-io.js:59
    :21)\n at CleartextStream. (c:\Projects\caa-api\node_modules\t
    edious\lib\message-io.js:3:59)\n at CleartextStream.EventEmitter.emit (even
    ts.js:95:17)\n at CleartextStream. (_stream_readable.js:746:14)' }
    existing Proc
    sp_helptext sp_Address_UPDATE
    CREATE PROCEDURE [dbo].[sp_Address_UPDATE]
      @AddressID             INT OUTPUT,
      @Line1                 NVARCHAR(400) = NULL,
      @Line2                 NVARCHAR(400) = NULL,
      @Line3                 NVARCHAR(400) = NULL,
      @UnitNumber            NVARCHAR(30) = NULL,
      @City                  NVARCHAR(400) = NULL,
      @StateProvinceID       INT = NULL,
      @PostalCode            NVARCHAR(50) = NULL,
      @CountryID             INT = NULL,
      @Latitude              NUMERIC(30, 8) = NULL,
      @Longitude             NUMERIC(30, 8) = NULL,
      @Elevation             NUMERIC(30, 8) = NULL,
      @Active                SMALLINT = NULL,
      @ModifiedBy            NVARCHAR(50) = NULL,
      @Error                 NVARCHAR(400) = NULL OUTPUT,
      @Locality              NVARCHAR(400)=NULL,
      @AdministrativeArea    NVARCHAR(400)=NULL,
      @AdministrativeSubArea NVARCHAR(400)=NULL,
      @Country               NVARCHAR(400)=NULL
    AS
        IF @Country IS NOT NULL
          SELECT @Countryid = CountryId
            FROM countries
           WHERE ( Country = @Country )
                  OR ( CountryAbrv2 = @Country )
                  OR ( CountryAbrv3 = @Country )
        IF @AdministrativeArea IS NOT NULL
          SELECT @StateProvinceID = StateProvinceID
            FROM StateProvince
           WHERE ( abbreviation = @AdministrativeArea )
                  OR ( name = @AdministrativeArea )
      --    BEGIN TRAN
        UPDATE a
           SET Line1 = ISNULL(@Line1, a.Line1),
               Line2 = ISNULL(@Line2, a.Line2),
               Line3 = ISNULL(@Line3, a.Line3),
               UnitNumber = ISNULL(@UnitNumber, a.UnitNumber),
               City = ISNULL(@City, a.City),
               StateProvinceID = CASE
                                   WHEN AdministrativeArea IS NOT NULL
                                        AND @StateProvinceID IS NULL THEN NULL
                                   ELSE ISNULL(@StateProvinceID, a.StateProvinceID)
                                 END,
               PostalCode = ISNULL(@PostalCode, a.PostalCode),
               CountryID = CASE
                             WHEN Country IS NOT NULL
                                  AND @CountryID IS NULL THEN NULL
                             ELSE ISNULL(@CountryID, a.CountryID)
                           END,
               Latitude = ISNULL(@Latitude, a.Latitude),
               Longitude = ISNULL(@Longitude, a.Longitude),
               Elevation = ISNULL(@Elevation, a.Elevation),
               Active = ISNULL(@Active, a.Active),
               ModifiedDate = GETDATE(),
               ModifiedBy = ISNULL(@ModifiedBy, ModifiedBy),
               locality = ISNULL(@locality, locality),
               AdministrativeArea = ISNULL(@AdministrativeArea, AdministrativeArea),
               AdministrativeSubArea = ISNULL(@AdministrativeSubArea, AdministrativeSubArea),
               Country = ISNULL(@Country, Country),
               geogcode = CASE
                            WHEN @latitude IS NOT NULL
                                 AND @longitude IS NOT NULL THEN geography::STPointFromText('POINT(' + CAST(@Longitude AS VARCHAR(20))
                  + ' ' + CAST(@Latitude AS VARCHAR(20)) + ')', 4326)
                            ELSE NULL
                          END,
               geocode = CASE
                           WHEN @latitude IS NOT NULL
                                AND @longitude IS NOT NULL THEN geometry::STPointFromText('POINT(' + CAST(@Longitude AS VARCHAR(20))
                + ' ' + CAST(@Latitude AS VARCHAR(20)) + ')', 4326)
                           ELSE NULL
                         END
          FROM [Address] a
         WHERE a.AddressID = @AddressID
        IF EXISTS(SELECT *
                    FROM address
                   WHERE Addressid = @addressid
                         AND ( locality IS NOT NULL
                                OR AdministrativeArea IS NOT NULL
                                OR country IS NOT NULL ))
          SELECT AddressID,
                 Line1,
                 Line2,
                 Line3,
                 UnitNumber,
                 isnull(Locality, City) AS 'Locality',
                 a.StateProvinceID,
                 isnull(administrativeArea, S.Name) AS 'AdministrativeArea',
                 AdministrativeSubArea,
                 a.PostalCode,
                 a.CountryID,
                 isnull(c.Country, a.Country) AS Country,
                 a.Latitude,
                 a.Longitude,
                 a.Elevation,
                 a.ModifiedBy,
                 a.ModifiedDate
            FROM [Address] a
                 LEFT JOIN stateprovince s
                        ON s.stateprovinceid = a.stateprovinceid
                 LEFT JOIN Countries c
                        ON c.Countryid = a.Countryid
           WHERE AddressID = @AddressID
        ELSE
          SELECT AddressID,
                 Line1,
                 Line2,
                 Line3,
                 UnitNumber,
                 City,
                 StateProvinceID,
                 PostalCode,
                 CountryID,
                 Latitude,
                 Longitude,
                 Elevation,
                 ModifiedBy,
                 ModifiedDate
            FROM [Address]
           WHERE AddressID = @AddressID
        RETURN @AddressID

    Nothing in the procedure is right. The “sp_” prefix has special meaning in T-SQL, so the name is wrong. THEN it gets even worse.
    No postal service in Earth uses 400 character address lineS. Can you give me an exampelf of a city_ with 400 characters? 
    Longitude and latitude are done with FLOAT because of the math used. ISO country codes are CHAR(3). Addresses do not have an id; we have “<something>_address” in RDBMS. Do you want some industry standard like the SAN? 
    The (ModIFiedBy, ModIFiedDate) pair is audit data, so it is illegal to have it in the table under audit. 
    Your code is BASIC or COBOL written in T-SQL with 1960's with  IF-THEN control flow and not in declarative SQL! Why did you fail to use COALESCE? 
    Look at how to write a MERGE statement and get rid of this procedure.  And look at an address scrubbing tool for the data. In the future, post DDL and follow minimal Netiquette. 
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • TS3899 I have just set up my new iphone 5 from my 4.  My mail is not coming through and it keeps asking me for my Yahoo password which i am putting in and then it says operation could not be completed (MFMessgeErrorDomain error 1032) what does this mean

    Im having trouble setting up my mail.  I have just upgraded from a iphone 4 to 5.  mail keeps asking for my password when i put it in it comes up saying
    the operation could not be completed (MFMessageErrorDomain error 1032)
    what is this??

    Nice try! Take a hike.

  • HT1751 I was installing iTunes 11.1.4 and it was unsuccessful. I get a message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

    I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • Cant install itunes 10.5 keep getting Apple Aplication Support - could not open key error

    I ve been getting this message over and over:
    Apple Application Support
    Could not open key:
    UNKNOWN\Components\DA42B......................
    Verify that you have sufficient access to that key, or contact your support personnel
    I have uninstalled all Apple soft and tryed to reinstall itunes 10.5, but there is no help. I run win 7 64 on toshiba notebook

    Open regedit using "run as administrator".
    Go to the registry key:
    HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInstallerUserDataS-1-5-1 8Components
    ...and selected the folder DA42BC89BF25F5BD0AF18C3B9B1A1EE8
    (there are three folders with very similar names A,B & C you want the first one)
    Right click & choose Permissions
    Click Advanced, and then the Owner tab
    Type  (not administrators) in current owners field and check the box to replace the owner on subcontainer and volumes
    Apply settings and then click Permissions tab. Once again, add  (not administrators) to the list of permission entries, then click edit and check all permission boxes. Also click the 2 bottom boxes concerning the inheritable permissions.
    [Note: In my case I was a member of administrators and administrators was already set in all of the above settings - I've no idea why it needed to be set to my user rather than the administrator group, anyway it solved the problem for me]
    Click OK
    Now back on the main permissions tab, add  in the user name window and then check full control and read checkboxes. Click OK.
    On the menu bar click file > exit
    But if u have the message pop up more then once then just make the permissions for the entier S-1-5-18Components folder

  • I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    I am trying to restore an older iPod Touch, but do not have the passcode.  I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account.  Help..

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • I am getting a message that says download failed because of internet connectivity/ firewall

    i am getting a message that says download failed because of internet connectivity/ firewall- how do i fix that? I am on vacation in mexico, need to install bridge to edit photos and the creative cloud wont install....

    Hi,
    Please refer to the help document below:
    Troubleshoot download problems
    Regards,
    Sheena

  • I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

    I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

    I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

  • "Error 16" solution doesn't solve problem, same error message pops up.  Further steps?

    Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16.  Stumped!

    Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
    situation, I¹m afraid.  I think I¹m going to have to start with a new drive
    and import/update until I find the source of this issue.
    Jim
    "Error 16" solution doesn't solve problem, same error message pops up.
    Further steps?
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop
    General Discussion - View the full discussion
    <https://forums.adobe.com/message/7154907#7154907>
    Permissions problem.  Open Terminal and copy/paste this line: sudo chmod -R
    777 /Library/Application\ Support/Adobe Gene
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7154907#7154907 and clicking ŒCorrect¹ below
    the answer Replies to this message go to everyone subscribed to this thread,
    not directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    Please note that the Adobe
    Forums do not accept email attachments. If you want to embed an image in your
    message please visit the thread in the forum and click the camera icon:
    https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
    thread, please visit the message page at
    , click "Following" at the
    top right, & "Stop Following" Start a new discussion in Photoshop General
    Discussion by email
    <mailto:[email protected]>  or
    at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
    &container=4694>  For more information about maintaining your forum email
    notifications please go to https://forums.adobe.com/thread/1516624.
    >

Maybe you are looking for