TS4338 When latest software updated on Iphone 4, all my songs didn't update so now I can't access them

When the latest upgrade to IOS 7 installed on my Iphone 4S, I was unable to access all of my songs on Itunes.  They have a circle beside them.  It seems like it didn't complete the download but it shows that I have the latest version.

Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.

Similar Messages

  • I just installed the latest software update and now I can't open Mail 4.5 on my Mini 2,1. How do I re-install Mail?

    I just installed the latest software update and now I can't open Mail 4.5. This is a Mini 2,1 using OSX 10.6.8.

    Try re-installing the big 10.6.8 Combo...
    http://support.apple.com/kb/DL1399
    Repair Permissions afterwords, reboot.

  • I had to set up my iphone as a new phone because the icloud backup wasnt able to go through right away because it required the latest software update and now I can't figure out how to use my old back up.

    Please HELP

    Go to Settings>General>Reset, tap Erase All Content and Settings, then go through the setup screens on your phone again and when given the option, choose Restore from iCloud Backup.

  • Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

    Since installing the latest software update I have been unable to access my mail app.the screen appears blank?

    Force close the mail app and reset your iPad. See if that fixes it.
    In order to close the mail app, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the mail app and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1338 Help since installing latest software updates I now can't open safari????

    Help since installing latest software updates I now can't open safari????

    Hi Stewartirl,
    Welcome to the Support Communities!
    Are you only having issues opening Safari? Are you able to connect to the internet with other Browsers or using Mail?
    The article below is a good starting point for troubleshooting.  I'd start by plugging in an ethernet cable and restarting the computer.  If the wired (LAN) connection works, then unplug the ethernet cable and continue troubleshooting the wireless connection.
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    http://support.apple.com/kb/HT1714
    Cheers,
    - Judy

  • Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    I have the same problem and haven't been able to figure it out either

  • I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I've updated my iphone 3gs from iOS 5 to iOS 6 and now I can't access the internet on 3g, can anybody help??

    I don't follow your instructions... mine goes Settings->General->Cellular and from there it's just on/off options for Cellular Data, Enable 3G, Data Roaming, etc. Or I could go Settings->General->Profile APN Carrier Settings but when I click that it just shows as verified but no Visual Voice APN or MMS Settings. If I click More Details it goes to Signing Certificate which has a bunch of parameters for unlockit.co.nz but I am unable to change anything.
    I just updated my iphone 3GS to IOS 6 and my internet (wifi and 3G), voice and text all work, but the only thing I can't do is send/receive pictures via text message. I am using At&t prepaid sim. I tried turning off the phone completely but I'm trying to avoid a complete restore.. at least until I can understand the problem better! Any help would be appreciated!
    Thank you!

  • So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

    So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

    Ok, sorry. And yes, I just restored my iPhone as new and tried to put all the songs on there before I even restored with my previous backup, but it still does the same thing... even when I just checked the option to sync only "selected music or videos". How's that possible?
    P.S. After I tried syncing with checked songs only, nothing showed up under Music on my phone and this message popped up in iTunes: "The iPhone "..." could not be synced because the sync session failed to finish." If you could, please tell me what that means, thanks.

  • I was getting messages that my Aperture Library was full, so I updated to Aperture 5.3.1. When I open it, I'm asked to update my library. When I select that option, I'm told that my library is full. Now I can't access my library at all. What should I do t

    Hi all,
    I was getting messages that my Aperture Library was full, so made an appointment at my closest Mac store, but have to wait 2 days. They advise you to update saoftware before coming in, so I updated to Aperture 5.3.1. When I open it, I'm asked to update my library. When I select that option, I'm told that my library is full. Now I can't access my library at all. What should I do to access my library? Do I have to uninstall 5.3.1 and reinstall an older version?
    Another problem I have recently encountered ... all the up and down scrollers on various screens have disappeared. They reappear fleetingly when I use my up and down arrowa, but I can't always catch them. How do I get my scrollers back?

    Thank you so much for your patient guidance and screen captures.
    You are welcome.
    My external hard drive is properly formatted for Aperture, so I am currently copying my Aperture library to it. That will take hours since it is copying 101 GB.
    o.k.
    I understand that I need to clean some space on my internal hard drive and reformat the Aperture library to get back in operation.
    You need to upgrade the Aperture library to be used with Aperture 3.5.1.  That will happen automatically, when you first double click the copied lirary to open it in Aperture.
    I'll also need to back up my external drive with a new external drive if I make space on my internal drive by removing some photos from there and store them on my current external drive.
    What do you use for backup? If you are using TimeMachine it is better to have only the Time Machine backup on the Time Machine drive . In that case would I put the Aperture library and other data on a new drive and keep the old drive for backup.

  • I have just done a software update and now I can not open my itunes. How can I open itunes?

    Hi, I have a macbook pro os x, version 10.6.8
    While doing a software update, I was asked to quit itunes to download the update. Now I can not open itunes. The icon is still there, but it just bounces up and down when I click on it. What is happening there? And how can I open itunes? Do I need to down load itunes again?

    Settings > Messages > Send & Receive
    Look at the Apple ID and the "YOU CAN BE REACHED..." entries. Make sure none of these are shared with your partner.

  • I just installed the latest Security update and now I can't open iPhoto. I keep getting a message that it quit unexpectedly because of a problem with the scene kit plugin. I have no access to my photos.

    I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
    I'm using a Macbook Pro  Mavericks Version 10.9.5

    Probably the reboot used to log into the Guest account and then your account again fixed the problem.  If often will.

  • HT1923 I have windows 8.01 OS. pushed the itunes update and now I can't access itunes at all. Error 7 error 127. Have tried repairing. Uninstalling and reinstal. Nothing is working. And worst is I can't seem to contact anyone at apple to get help

    My OS is windows 8.1. Today when going onto itunes it asked me to update to 11.something so I dd. Now I can't access itunes at all. Keep getting an error message. error 127. I've tried repairing. Uninstalling and re installing. Can't seem to contact anyone at apple to get support - just keep going around and arond on their contact page.

    Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
    If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

  • I did the latest software update and now I cannot get my ipad mini to work.

    I did the latest software up date. now all my ipad mini will do is flash the apple on and off. Can anyone help?

    Try recovery mode as described here:
    http://support.apple.com/kb/HT1808

  • I downloaded software updates and now I can't get online with airport

    Hello!
    This morning, I got asked by my software update on my Mac (which automatically asks me every week) to install some software updates. I stupidly did not think much about it and clicked ok.
    The software updates that I installed were:
    1.) Java for Mac OS X 10.3, Update 5 version 5.0
    2.) Quicktime version 7.1.6
    3.) Security Update 2007-005 version 1.0
    4.) Security Update 2007-006 version 1.0
    Now I cannot connect to the airport. Everyone else around me is fine. The airport icon in the top right corner shows 4 bars. When I go into Network Status, it says that the AirPort is turned on but is not connected to the internet with a yellow dot next to it.
    I went into keychain access and under access control, I noticed that the box was checked next to "confirm before allowing access". However, whenever I try to connect to the internet either via Firefox or Safari, there is no pop up that asks me to confirm. Also, I tried to change the settings in Keychain Access, I changed the setting to "Allow all applications to access this item" and when I click save changes, I get the color wheel of death and the program is listed as not responding.
    When I try to enter the WEP 40/128-bit hex password, it either says the computer cannot connect to this network or I get the spinning color wheel and nothing happens and I have to restart the computer.
    Does anyone have any suggestions? Perhaps I can uninstall whatever I installed or I need to reconfigure the IP address (I have no idea how to do this)
    Thank you so much for your help!! It is much appreciated.

    First, try repairing permissions. It's often recommended to be done both before AND after installing software updates.
    Find Disk Utilities in the Utilities folder (on the Applications folder). Launch it and, in the left-hand pane, single-click your boot volume (if you have multiple volumes/drives/partitions on you hard drive). A "Repair Permissions" button is under the main window. Click it and let the program work.
    If that doesn't work, post back.
    A

  • Performed software update and now I can't get past a window with Itunes logo and usb picture?

    When I powered up the Ipad this morning, there was a software update notification.  After completing the update, the Ipad won't boot past a screen that has the Itunes logo and a USB cord just below it.  I've powered off and it still wont get past this screen.

    Thanks for the suggestion but unfortunately, it did not work.  Restore was unsuccessful and now I can't get iTunes to stay open long enough to attempt a second restore.   I've just posted a new question with more details of what I've tried. 

Maybe you are looking for

  • SSRS 2012 background color format by expression issue when exporting to Excel.

    We are using SSRS 2012. We have a report that conditionally formats a background color for some cells. The report renders properly in a browser and in Excel 2003 format. In Excel format all cells after the first one that meets the condition are highl

  • AQ Callbacks - Blocking background processes and best practices.

    We are running several queues within our company and one of them uses pl/sql callback functionnality. Basically, several triggers can enqueue a message when underlying tables are updated. The goal of the callback is to "treat" those messages, which m

  • Using T3 Services from EJB's

    I want to use weblogic's T3Services from within stateless session beans. But when I try to do this I get the following error java.rmi.RemoteException: java.lang.NoClassDefFoundError: weblogic/common/T3ServicesDef and when I try to put \weblogic\class

  • Outer Join not giving correct result

    I have two tables=> tab_child_tmp (product_id,region,child_val,mst_product) and tab_master_tmp (master_product_id,region,master_val) tab_child_tmp.mst_product is the foreign key referencing tab_master_tmp.master_product_id. Currently the tables are p

  • Binding multiple instance variables of multiple objects

    So I got this problem and cant figure out a solution. It seems to be a quite simple pattern but Im really new to jfx.... Follows an imaginary code that kind of represents the problem in my real code: class A {   public var vA: String;   //...code tha