TS4384 Why my Mac Pro with retina display is become hot while on charging

Why my Mac Pro with retina display is become hot while on charging

Yes. Don't cover the Mac with cases or "skins" or use keyboard covers, since they impede proper heat dissipation. Its entire case serves as a heat sink.
If you are concerned contact AppleCare. A Mac should never become so hot you can't hold it.

Similar Messages

My MacBook Pro with retina display got extremely hot while closed an in a carrying case

I have a new Macbook Pro with Retina display. I left my house at approxomately 6 p.m and I took my macbook pro with me. I put it in a protective Incase sleeve which I put in my messenger bag. When I got to my final destination about 1 hour and 40 mintutes later when I went to retrieve my macbok the entire messenger bag was hot. When I went to get the macbook out of the sleeve the actual computer was so hot I could barely touch it. I could even smell the computer (you know that new comptuter smell) standing a few feet away from it in a cafe that his good ventilation. When I left my house the battery was at 100% charge. When I discovered the computer in this state I had to hold down the power button to get it to start. When i logged in the battery was at 47%. I discovered that I left iphoto, chrome and microsoft word open. Should I be concerned? The machine was so hot that I can not imagine that if this turns into a reoccuring issue that it won't damage the computer. I wonder what would of happened had I not discovered it.

When it gets to a certain temperatue it would have gone into thermal shutdown, from your scenario it looks like your machine failed to enter sleep mode or power nap due to some applications that was holding it up.
as this machine was inside a sleeve and still running the machine couldn't dissipate the heat and ramped up the fans to attempt to cool itself hence the battery drain.

Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. Help?

Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. I can change them on my old Mac Pro with Lion, but not the new one. I can scan but I can't save it to a folder on my hard drive. I can only let it default to a back up date folder. Tried all sorts of things to change the preferences and folders, nothing worked. Ideas?
Stephanie

To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
Plug it in, then on the iPhone sync summary screen, click "info" along the top.
Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

Why 15' Macbook Pro with Retina Display Shows 4K Resolution?

I discover a very interesting problem when taking a screen capture in 15 inch Macbook Pro with Retina display under different screen resolution settings.
Please see the image below first.
Info on the Left : Screen captured in "Default" setting, which is the best retina setting, everything is huge and very Sharpe.
Info on the Right: Screen captured under the "More Space" setting, which everything looks small and give more space.
The problem is the screen captured file pixel resolution in each screen resolution settings:
The "Default" screen setting showing the correct pixels at 2880 by 1800 which is perfect.
The "More Space" setting is showing 3480 by 2400, at 4K resolution.
My question is:
Why is that when the display is under "More space" setting result with more pixels?
Can anyone help me to explain this with this please?

I'm not sure what is to explain. "More space" works by pretending that there are more pixels available on the screen than the physical screen has, so it's not too surprising that a screen shot should have more pixels.

HT1222 I was trying to run ITunes 10.7 update on my Mac Pro with Retina display but the message appeared "An error has occurred" so I can proceed with the update. I dont' see any other messages. Any ideas what could go wrong?

I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update

Scott's solution fixed the problem. It would have been helpful if the update message in the App Store had reported that. I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes. I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher. I have to come to the forum every time something happens. Why not simply have a dialogue window that opens up to explain the most likely issues?

Is it possible to load Windows AP on an Apple Mac Pro with Retina Display?

I have read that Windows 7 loads fine but I want and need Windows XP on my mac pro.

You can't direct install XP, only Windows 7 in Apple's BootCamp now, it's because of hardware driver support Appel has to provide to Windows.
However you can run any Windows or Linux version in a virtual machine program in a windows in OS X
There is a performance and Direct X penalty, but it works very well and fast on the latest machines.
If you 3D game, the Windows game has to use OpenGL drivers, so it will perform fast in the virtual machine program.
Windows in BootCamp or Virtual Machine?

Mac book pro with retina display gets hot

I have noticed lately that when using my macbook pro with retina display gets really hot when using it - I dont think tis is normal. Or is it? I have had it less that a year and use if for photography editing.

What is hot? Heat in a MBP will be a function of the applications used and the stress that they place on the CPU/GPU.
If you can provide actual temperature data using Temperature Monitor from Bresink.com or iStat pro and an image of Activity Monitor, then an evaluation can be made if there is an issue. Note that Activity Monitor should be set to 'All Processes' and '%CPU' to display values from high to low.
These are examples from my MBP:
Ciao.

HT3775 Why won't quicktime player work? I own Mac Book Pro with Retina Display and connote get the quicktime player to open or play quicktime movies?

Why won't quicktime player work? I own Mac Book Pro with Retina Display and connote get the quicktime player to open or play quicktime movies?

Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.quicktimeplayer.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update.

The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

it's advertised 720p so yes it is the same as all the other MBP. it may just be the resolution of your monitor is stretching the pixels. Don't worry about bringing it to the apple store.

Why does safari keep crashing in mac book pro with retina display

I have a new mac book pro with retina display. I transfered all my data from my old laptop with time maching but now when I try to open safari it keeps crashing. Has anyone had a problem with this. All my software is up to date.

Hello psadana,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro. I would be concerned about this too.
I recommend reviewing the full article but steps in the section labeled "Symptom: The network connection drops unexpectedly" specifically stand out to me for the issue you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

Need wireless monochrome laser printer for home office to use with new mac book pro with retina display. I also have to have networking capability. Suggestions for economic printers?

HI, I need to buy an economic monochrome laser that will work wirelessly with new Mac Book Pro with Retina Display inmy home office. Any suggestions? I was considering the HP 1102W or Brothers HL22700W but have heard that they do not work with Mac 10.6.1 or upgrade. Need to try to get his done asap so I will appreciate any and all feedback!

http://www.shopping.hp.com/en_US/home-office/-/products/Printers/Printers

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

I can't add printers to my new mac book pro with retina display

I am trying to set up my HP wireless printer to my new mac book pro with retina display. I can't get it to work! I have down loaded the latest driver for my printer, and when I go into the printer area and try and add the printer, nothing shows up and it won't let me even add it. I can't seem to connect my mac directly to my printer either as I must need a different cord as there does not seem to be a port for the "phone like jack" that I could fall back on with my old Mac. My printer prints great so I hate to just buy a new printer, but I can't get this to work. My wireless router is located in the basement, far away from where I keep my printer so it also makes it hard to rest everything. I even bought the blue tooth adaptor for the HP printer thinking that would solve it all, and nope! Any help would be greatly appreciated!

I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless. I had to move my printer downstairs to where my router is...which is not that convient. I printed up the page you asked about....and as expected, it says it is off line and there is no IP address. So now I need to figure out how to make my printer itself wireless. I did download the HP driver I needed...but I can't access it to do anything else. It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack). I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!

TS4384 Why my Mac Pro with retina display is become hot while on charging

Similar Messages

Maybe you are looking for