TS440 Corrected ECC errors after cold start

Does anybody else get a correctable ECC error on a TS440 when they run memtest 6.1.0 in UEFI mode after a cold start? If I do an ordinary reboot, they don't show up, but if I shut down and then turn it back on, and then run memtest 6.1.0, I see one to four correctable ECC errors. Never anymore after that. It always seems to bother the second DIMM slot, no matter what DIMM I put in it. If I have no DIMM at all in it, then they don't show up. Just wondering if this is just me noticing this or if everybody is affected. (Wouldn't surprise me if most people miss this since older versions of memtest can't detect errors that ECC corrected.) If nobody else can repeat this, should I have Lenovo replace the motherboard?

Thanks. Also, I'm doing this over AMT, and it doesn't happen 100% of the time, more like 75% of the time. Rebooting doesn't trigger it, it has to be just after it comes on from a shutdown state and booting the Memtest 6.1.0 ISO and going right to the scan. If you try to repeat, try with all four dimm slots filled. I'm using this ram by the way: http://www.amazon.com/gp/product/B008LMO1DG?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

Similar Messages

  • X230t no bluetooth after cold start

    Hi everyone,
    Recently I upgraded to Windows 8.1 and after "cold" start bluetooth doesn't work and is not present in Device manager and in system tray. After restart all is OK.
    The problem occurs only after "Shut down"!
    Any ideas how to solve this problem?
    Thanks in advance

    I have one of the Mid 2010 27-inch iMac's running 10.7.3 without any audio problems like you describe. You mentioned that you have two hard drives. Do you have the factory installed hard drive + SSD, or did you install it yourself?
    You mentioned TestGen. What version do you have installed? It appears that the latest version of the TestGen browser plug-in is 7.5.1.
    Have you tried resetting PRAM?
    Have you tried booting in Safe Mode to see whether booting without all of the extra kernel extensions makes the issue go away? If it does then I would look consider reinstalling Lion and evaluating the various utilities your've installed which may be affecting your audio.
    http://support.apple.com/kb/HT1455

  • Database give ORA-600 error after cold backup

    HI,
    I have oracle 10g install on linux system. i take cold backup of my database using
    sql> shutdown immediate
    and then copy all files to any other location.
    but when i start my database it gives me error like
    Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
    ORA-00607: Internal error occurred while making a change to a data block
    ORA-00600: internal error code, arguments: [4193], [136], [139], [], [], [], [], []
    Fri Dec  4 15:23:18 2009
    Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
    ORA-00600: internal error code, arguments: [4193], [67], [70], [], [], [], [], []
    Fri Dec  4 15:23:19 2009
    Doing block recovery for file 2 block 1702
    Block recovery from logseq 13, block 3531 to scn 758385
    Fri Dec  4 15:23:19 2009
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 13 Reading mem 0
      Mem# 0 errs 0: /opt/oracle/fina/dbs/redo01.log
    Block recovery completed at rba 13.3532.16, scn 0.758386
    Doing block recovery for file 2 block 153
    Block recovery from logseq 13, block 3531 to scn 758436
    Fri Dec  4 15:23:19 2009
    Recovery of Online Redo Log: Thread 1 Group 1 Seq 13 Reading mem 0
      Mem# 0 errs 0: /opt/oracle/fina/dbs/redo01.log
    Block recovery completed at rba 13.3612.16, scn 0.758437
    Fri Dec  4 15:23:19 2009
    Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
    ORA-00607: Internal error occurred while making a change to a data block
    ORA-00600: internal error code, arguments: [4193], [67], [70], [], [], [], [], []
    Fri Dec  4 15:23:29 2009
    Errors in file /opt/oracle/fina/bdump/fina_smon_4422.trc:
    ORA-00600: internal error code, arguments: [4193], [136], [139], [], [], [], [], []
    Fri Dec  4 15:23:29 2009
    Errors in file /opt/oracle/fina/bdump/fina_pmon_4410.trc:
    ORA-00474: SMON process terminated with error
    Fri Dec  4 15:23:29 2009
    PMON: terminating instance due to error 474
    Instance terminated by PMON, pid = 4410i have seen this happen sometime after cold backup database give errors. is taking cold backup of database is not safe.
    Please suggest.

    Umesh,
    Since it is case of Ora 600, for which only last solution is oracle support, but i would like to mention that your are getting ORA-00600: internal error code, arguments: [4193].... So, this 4193 is cause to read following links too:
    http://www.orafaq.com/forum/t/47048/2/ and. see Metalink note 153788.1 and 39282.1.
    Regards
    Girish Sharma

  • Correcting basic errors after OCR'ing to text

    I've been converting some old documents into searchable PDFs for use in work. All fine and dandy and the first OCR pass into ASCII text was OK - and I know I've got to fix the anomalies but how come certain ones won't let me correct them?
    I can see the word in the dialog box (i.e. 'publish') but Adobe 8 Standard suggests that I use 'pubJi~h~d' instead - but the box is greyed out so I can't make the amendment and fix the OCR suspect.
    Why can I fix some but not others? The original document was in a decent sized font - not as if it's using MS Comic Sans or something equally illegible. So has anyone got any ideas on how I can fix these errors?

    It depends on how the PDF was created. It sounds like the PDF is already in text. If so, then why are you trying to convert to text. The Acrobat OCR has always worked this way. It will only work on pure graphics. If anything has been added or OCR'd, it will not work. If you still insist on trying to OCR the document, then you will need to save the PDF as a graphic (probably TIFF) and then open those TIFF files in a new PDF document (you can simply drag and drop them to a blank Acrobat window). Then you can run OCR as long as the resolution is adequate.

  • HT1688 I have a PC computer and an I-phone 4s.  I set up an i-tunes acct online w/ icloud.  after a recent update my computer started receiving an error message on start up.  it says "AppleSyncNotifier.exe - Entry Point Not Found".  I click OK and it move

    I have a PC computer and an i-phone 4S.  I set up an i-tunes acct online w/ icloud.  After a recent update my PC started receiving an error message on start up.  It says "AppleSyncNotifier.exe - Entry Point Not Found".  It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll".  I click on OK and it moves on.  It doesn't seem to affect my computer, but it's annoying.  Any ideas on correcting this?

    UPDATE - (Made a second post so it'd be clearer)
    I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
    Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
    In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
    I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
    On a completely unproductive note: Despite my love for Exchange, I hate MAPI.

  • No sound on cold start after upgrading to Lion

    I am running the 27" iMac with dual hard drives and have recently upgraded to Lion.  Two things are happening.
    1.  On cold start / boot up, my system has no sound.  And by no sound I mean - no sound.  When I go to the Sound option in System Preferences, everything is greyed out and I can not adjust or access any of the controls.  The only solution has been to immediately restart my computer.  After restart, everything is fine.
    2.  On cold start / boot up, sometimes I receive a pop up telling me that TestGen is not installed properly and to please re-start.  Of course, since I have no sound I'm automatically doing that.  Could be that these to things are related somehow?  I don't know.
    Lastly, and I'm not adding this to the list because there is already a thread about it . . but I will mention it . . I am getting error messages trying to play certain videos "This video requires Quicktime which is not supported by this version of iTunes."  Oh yeah?  Since when?  The workaround is that you apparently have to delete the video from your Library -- DO NOT DELETE FILE FROM HARD DRIVE -- and re-add to your Library.  I think this has to be the dumbest bug out there right now.
    But what I'd really like is to not have to re-start my computer every d$!@n time just to be able to have sound.
    Tired of the Lion errors.  Apparently we're all Beta testers <-- lame humor.

    I have one of the Mid 2010 27-inch iMac's running 10.7.3 without any audio problems like you describe. You mentioned that you have two hard drives. Do you have the factory installed hard drive + SSD, or did you install it yourself?
    You mentioned TestGen. What version do you have installed? It appears that the latest version of the TestGen browser plug-in is 7.5.1.
    Have you tried resetting PRAM?
    Have you tried booting in Safe Mode to see whether booting without all of the extra kernel extensions makes the issue go away? If it does then I would look consider reinstalling Lion and evaluating the various utilities your've installed which may be affecting your audio.
    http://support.apple.com/kb/HT1455

  • When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

    When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been  unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • I can't access my i tunes, getting message-System error-can't start because MSVCR80.dll is missing, also i tunes was not installed correctly-error 7(Windows error126)-What do i do to get into my itunes library?

    Can someone please help me to get to my i Tunes library? I am getting the following message when trying to access i Tunes=i Tunes. exe-System error-can't start because MSVCR 80.dll is missing-Try reinstalling program. Also i Tunes was not installed correctly-Please reinstall i Tunes.-Error7(Windows error 126).

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

    First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

    Unfortunately, it says I can't delete anything without the missing password.

  • HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

    My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
    Unable to bootstrap transaction group 2517: inconsistent crosscheck
    No valid commit checkpoint found
    The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
    Problems were encountered during repair of the partition map
    Error: Storage system verify or repair failed.
    (the same with 2518, 2519 and 2520 transaction group)
    I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me? Tha

    Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me? Thank you very much!

    Hello, Why am I getting the following message after I start up my computer: "CAHeadless has encountered an error. [/Adobe/premiere/elements/Release/12/ALL_LANG_12.1/CAHeadless/Make/Mac/../../Src/CAHeadle ss.cpp-683]." Anyone, please solve this for me? Thank you very much!

  • On my Mac, after the installation i get this error when i start - Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283] any ideas how to fix this

    On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
    any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....

    Here's the contact link for Adobe support. It's just three clicks from the site's home page.
    Contact Customer Care

  • The boot camp manager keeps quitting after re-start with an error message, why? I've installed the latest updates for XP 32bit

    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit

    Alveto wrote:
    The boot camp manager keeps quitting after re-starts with an error message, why? I've installed the latest updates for XP 32bit
    Are we supposed to guess what the error message is?

  • PSC 1315 faded stripes when printing after a cold start

    Hello All,
    I have an HP PSC 1315 that is about three years old and was working fine until it recently started printing with faded greyish or white stripes across the page in grayscale printouts. This only happens immediately after a cold start, that is, after not using the printer for about a day. 
    I've found two temporary ways to deal with the problem. First I can just let it keep printing. By the second or third page, the quality is OK. Second, I can prime the cartridge head by running it across a warm moist paper towel before I print. Neither of these works as a permanent solution, though.
    I store the printer in a climate controlled room. The temperature in the room sometimes falls to 62 nowadays but when the problem started occuring the room was the 75-80 range. The humidity in the room is about 50%. I don't think the temperature of the room is causing the cartridge head to dry out, but I could be wrong. Does anyone have any suggestions for how to solve this problem permanently? Thanks.
    -Chris 

    Please see my response in your other thread:
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Solution-Center-says-printer-is-dis...
    Thanks
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Fatal error after starting j2ee engine

    Hi SDN,
    We have installed a  nw 7.0 SP21 sytem.
    when I system start ive got  with following error message :
    com.sapportals.wcm.WcmException: config ID bw_service already exists
         at com.sapportals.wcm.util.systemconfig.SystemConfig.addSystemPrincipal(SystemConfig.java:1019)
         at com.sapportals.wcm.util.systemconfig.SystemConfig.addSystemPrincipal(SystemConfig.java:938)
         at com.sap.ip.bi.broadcasting.BIRfcBroadcastingService.doAfterInit(BIRfcBroadcastingService.java:152)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.afterInit(BIRfcService.java:151)
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:877)
         at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:1118)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1707)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1662)
         at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1592)
         at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:422)
         at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:54)
         at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
    Severity:  fatal
    Date:  2010-11-15
    Time:  12:51:36:210
    Message:  
    Error in DoInit method
    Category:  /System/Server
    Location:  com.sap.ip.bi.webapplications
    Application:  sap.com/irj
    Thread:  SAPEngine_Application_Thread[impl:3]_30
    Data Source:  /usr/sap/BIT/DVEBMGS00/j2ee/cluster/server0/log/system/server.log
    Message ID:  001A4B06B834005B0000032A0000096E0004951462CB2BBF
    Argument Objects:  n/a
    Arguments:  n/a
    DSR Component:  n/a
    DSR Transaction:  d2d285e9f09d11df9f4d001a4b06b834
    DSR User:  n/a
    Message Code:  n/a
    Session:  0
    Transaction:  n/a
    User:  J2EE_GUEST
    Sytem details:
    NW7.0 sp21
    javaVMVersion=1.4.2_17, 64-Bit Server VM
    Can someone suggest me how I can fix this.

    Thanks Matas !
    You're absolutely right i find duplicate record for user bw_service when i delete it eror desapear !
    but i find anather error in log file after java start :
    maybe you can help solve this problem?
    Group "Administrators" does not exist.
    com.sap.security.api.NoSuchGroupException: Group "Administrators" does not exist.
         at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1421)
         at com.sap.caf.eu.gp.model.context.impl.GPModelServiceUser.checkServiceUser(GPModelServiceUser.java:64)
         at com.sap.caf.eu.gp.model.context.impl.GPModelServiceUser.<clinit>(GPModelServiceUser.java:83)
         at com.sap.caf.eu.gp.model.context.impl.UserContextFactory.getServiceUser(UserContextFactory.java:288)
         at com.sap.caf.eu.gp.model.devobj.impl.DevelopmentObjectManager.<init>(DevelopmentObjectManager.java:171)
         at com.sap.caf.eu.gp.model.svc.impl.GPServiceImpl.<init>(GPServiceImpl.java:262)
         at com.sap.caf.eu.gp.model.svc.impl.GPServiceFrame.initGPModel(GPServiceFrame.java:877)
         at com.sap.caf.eu.gp.model.svc.impl.ContainerEventListenerImpl.serviceStarted(ContainerEventListenerImpl.java:57)
         at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:158)
         at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:102)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156)

Maybe you are looking for