TS4424 Anyone solve this problem on 10.6.8. Server?

Well, tried to tun Mail for the first time today :-(
Seems there has been some ccorruption from Software Update because Mail 4.5 won't run on my Mac-mini Server and (until today) I have never manually installed any updates. And yes, according to Software Update I am current with everything; including Safari 5.1.7 which seems to be the culprit.
I spent 2 hours on the phone with Apple Care (Enterprise Group since my hardware is a Server Model) and got no where. Couldn't follow the one Support Article that specifically fit the error (TS4424) because it is wriiten for Workstation not Server. So, I yried substituting the proper Server version of the Update Combo v1.1 (which installed fine aklong with every other v10.6.8 OS Update, Safari v5.1.7 and even the Software Installer Update v1.0) and still I cannot get the Security Update 2012-004 to install because it drops a yellow-bang-triangle on all my disks and gripes "This volume does not meet the requirements for this update." This is the same error I got when I tried the Workstation updates and I don't see Server version to try.
The short answer from Apple Care was "Re-Install" and "Re-Update" and call back if it still fails on a VIRGIN OS!-(
Not exactly what I wanted to here...
If anyone has a clue, I'd sure like to avoid the hassle of dropping a fresh os on an external drive just to find out it won;t make a difference.
Help?
Cheers,
...mac
PS: The Apple Care Tech's Snow Leopard Server exhibited similar problems to mine and it still didn't get me any answers:-)

If you've already spent hours on the phone with Apple and gotten nowhere, there's not likely going to be a better solution offered here.
The first try would be the combo update, and that didn't resolve this.
The next is what Apple recommended. Haul off a backup copy (or two) to external storage, wipe the disk, and reload OS X Server. That's a straightforward sequence, and the OS X Server installation can migrate in the old settings (migrated in from an external disk), and that will hopefully resolve whatever corruption is lurking here.
I've done various of these reinstalls with 10.6 servers, and they've cleaned up some odd errors.

Similar Messages

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

I too am getting the tritone sound every day at 2 17 pm with no message or notification on my 4s, has anyone solved this problem yet since 09? thanks

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

scottkb2000 wrote:
I'm confused. I just got an email from Apple Support Community (updates) and I see that a "baltwo" response is marked "This solved my question" (no offense directed towards baltwo). The question just seems to be more defined, not resolved. This is an Apple OS problem (seemingly) and needs to be directed towards a technical representative, not the community. I would ask that if anyone knows how to push this issue towards Apple, that is where the solution lies.
File a bug report with Apple via feedback. Do note that this goes through marketing and sales. No telling when it'll get to engineering. Alternatively, if you want to report this issue directly to Apple's engineering, bypassing marketing and sales, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering and you'll be able to track its status.

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

My apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

my apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

I solved that particular problem for myself (although I am running iTunes 11 under Snow Leopard on an iMac) by deselecting one of my Users Admin. privs. You see, I had two users w/admin privs & iTunes now plays nicely when there is only one admin.
Otherwise, I would keep getting stuck in an "infinite loop" of resetting passwords over & over and still iTunes was a mess - albeit on an intermittent basis which was absolutely driving me nuts!
I also think that firing up Safari and signing into my account @ apple first seems to help; providing that an apple cookie gets placed in my machine before I go to the iTunes store and enjoy surfing around there.
Anyways, good luck~

Has anyone solved this problem?

My ipod was taking forever on the 'do not disconnect' setting and getting really hot. I left for work and it was still the same when i came in 4 hours later.
In the end i decided to simply remove the dock from the ipod. When the screen changed it had the notorious folder and ! icon displayed. Now when i attempt to connect to my PC it does the same-takes forever and doesn't actually shows up in itunes (although the usb port recognises it as large storage device).
All this is accompanied by a constant spinning of the hard drive in the ipod. I know this is a common problem and was wondering if anyone with this problem has solved it without sending it for repair.

One method is to change to a more reliable firewire connection. Try here:
http://www.kelleytown.com/ikelleytown.htm#top

Please can anyone solve this problem...it's taking over my life!!

Hi, I hope someone can hep me with this as it's driving me crazy!!...I have a magnify glass effect for my main movie and everything is working great, except I need the magnify glass to stay within certain boundaries on the stage...basically when someone moves there mouse away from the flash movie in the centre of the page in a browser, it cuts off the glass and it looks funny (see www.zoeglazebrook.co.uk)...
Kglad has very kindly donated many hours to trying to solve this but it still isn't working unfortunately.
This is the code on the main timeline, and I just need to add in 125, 127, 1095, 775 coordinates in there to make it not go past these points on the stage:
var moveGlass:Number;
magnifyingGlass.onPress = function() {
    moveGlass = setInterval(startGlass,1);
function startGlass() {
    magnifyingGlass._x = _root._xmouse;
    magnifyingGlass._y = _root._ymouse;
magnifyingGlass.onEnterFrame = function(){
     this.largeobject._x = (this._parent.original._x-this._x)*2;
     this.largeobject._y = (this._parent.original._y-this._y)*2;

I'm not sure I understand your question.
I think you are asking about how once you start clicking it doesn't go off? You can add something like this:
magnifyingGlass.onRelease=magnifyingGlass.onReleaseOutside=function(){
delete this.onEnterFrame;
If I'm following you correctly. Or not.
I'm actually more annoyed by also having the pointer still show. So you might add a Mouse.hide() when they press and a Mouse.unhide() when they release. BTW, you need the onReleaseOutside because if you are limiting where the magnifying glass can be dragged then the pointer might not be above the glass when they release. Most people forget the onReleaseOutside and it causes a lot of problems.
Also I'm confused about your confusion of "...whether it's better to have a start drag on there instead."
startDrag() does just that. It takes the item that is referenced and makes it follow the pointer. And it also gives you an easy way to limit the bounds of that dragging to a rectangle. However you can only drag one thing at a time using startDrag and there is no way to do other things as you drag.
In this case you need to also reposition the large view at the same time based upon the position of the pointer. Therefore you need some other kind of loop that says, "every little bit of time make the glass match the mouse coordinates and also align the large image." You could probably make some kind of combined solution that starts the magnifying glass moving with startDrag and uses an onEnterFrame to position the large view, but why make it more complex than it needs to be?

Logitech speaker S715i won't recharge my "ipad mini" using the lightning to 30-pin Adapter. Has anyone solved this problem?

Everytime I connect my mini to the Logitech S715i or Logitech Pure-Fi Express Plus speaker a pop-up appears telling me the iPad doesn't recognize the device and the battery symbol shows that it isn't loading. I am using the lightning to 30-pin Adapter.
Is there a way to correct this so my speaker will act as a dock and load the iPad?
Would love the help if you have the know how. Thanks!

Since the last update I have noticed the percentage of battery power does increase when my iPad mini has been docked although the actually staus reported on the iPad screen while docked is 'not charging'. This is obviously an Apple recognization problem (not sure about third party as Apple is providing the software).
Will not return my Logitech as it has excellent sound (speakers are higher watt then others in this price range), plus it has a built in battery which means I can take it on the terrace for tea in the afternoon.
As pointed out it requires more power then the iPhone, it does take longer to charge, so in the future if I need a quicker charge I'll do it via a wall outlet.
side note: This problem must also be why my iMac is shutting down all other USB devices when the iPad is plugged in.

Its about Orkut whenevr i try to upload photos it shows that "it will appear soon" bt i cant if i try with google crome within minute it appear n many problem occuring with same website. can anyone solve this problem?

m facing problem with photo uploading n search in orkut instead of Firefox Google crome perform better, well m huge fan of Mozilla Fire fox.
== URL of affected sites ==
http://www.orkut.in

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Seriously. Can anyone solve this problem?

HI, I'm still struggling with this problem.
I have reinstalled the software, all the CS4 programs work fine and Premiere Pro does too apart from the problem that when I export, it gives me the menu to choose the output format, the location to save to etc etc. I then click export and the media encoder doesnt open.
I opened the task manager and nothing appeared when I tried to export so...?
Help this is killing me. I've made an entire film that I cant export

What do you mean by installing web browsers?
I didn't say anything about installing web browsers. I said to be sure not to have anything open when you run the CS4 installer--particularly web browsers--as they frequently result in failed installations. Adobe has acknowledged this but done nothing to fix the situation presently. It does not sound like this is the problem, however.
Is it possible that cleaning the scripts has effected the copy of CS4 MC I had on my hard drive? If I delete the copy and try putting it onto my PC again it will remedy those problems? It doesnt seem to like anything about the copy of CS4 I have now, and before this incident I reinstalled it maybe 4 times for various reasons without any problems?
I think you're getting confused. We're not talking about "cleaning the scripts"... we're talking about a script provided by Adobe that is supposed to wipe all traces of a previous installation of the CS4 suite, that were not removed during a standard uninstallation routine. If you tried running the Clean Script while you still had CS4 installed, chances are fairly high that you've created more problems for yourself. The Clean Script should only be run after a complete uninstallation, and from the sounds of it, you did not do this. I'm assuming you're running Windows; you need to go to your Control Panel, and use Add/Remove Programs or Uninstall a Program (depending on your Windows version) and uninstall the CS4 suite. If it doesn't show up in the list of installed programs, you've got bigger problems, because now parts of the suite are still present on your system, but there is no way for the uninstaller to remove them. The Clean Script--run properly--might help, but I can't say for sure. At this point, your only recourse might be a complete wipe of the computer, operating system and everything, and start over from scratch. Not good news, I realize, but the CS4 suite is a massive set of programs that sends out tendrils deep into many parts of your hard drive, and it can't simply be deleted like a file.

Loaded atv 4.2.2 problem with netflix login. Has anyone solved this problem?

Cannot login to Netflix on Apple TV after the 4.2.2 update. Ihave done a restore, unplugged and restarted, called netflix and they changed password. Was able to login to Netflix on Mac Air. Netflix says call apple.

I am also having this, and I am 4.4.3. I'm guessing it's a problem with the Netflix app and how it send the password. It seems that only passwords containing all numbers work, but I would like to have a more secure password protecting my Netflix account.

My applications disk won't install. Can anyone solve this problem?

I've recently bought a refurbished MacBook Pro, however upon trying to install the applications using the applications disk, it repeatedly states 'installation failed' and advises me to contact the service provider. I have already installed the OSx Lion without any issues, however the issue with the applications disk remains unresolved. It appears to begin the installation process each time with a loading bar, but then always eventually says 'error installation failed'.
I really really want to use the iLife applications that come with the MacBook Pro (main reason i bought it), hence why this is really irritating me. I will therefore be incredibly thankful if anyone can offer any solutions without a price tag, as I don't want to download from the app store when I'm meant to install them free and simply using this disk.

My wife uses my Apple ID and password to download and install all her software because that way we only pay for it once and get essentially a family license. Otherwise we would each have to purchase and pay for our own copy. However, that only applies when we are purchasing software from the App Store or the iTunes store. We each have our own individual iCloud accounts where we store our personal Contact, Calendar, and other data. You can change the Apple ID on your wife's computer by going to System Preferences > Accounts and choosing her account then clicking on Apple ID: Set.
Now if you want to make things more intertwined you and your wife can share your contacts, calendars etc with one another with read only or read write priveleges.

Can anyone solve this problem

hello everybody,
i am trying to write a online quize, and for that i used backend access and front end as servlet/jsp with
tomcat server,
and my program is working very efficiently on same computer, but when there are more than 15 or 10 to computer to access quize it goes
to long sleep to access next question (my page is one question in each page).
what to do for fast access or speed up for next question
can i used backend as mysql
or
anyother problem

Verify whether you have hardcoded "localhost" in any of your code. Also adding debugging statements helps narrow down the problem.
Amar.

I've got an iMac at OS X 10.6.8, but the app store won't let me upgrade to Mountain Lion. Anyone solved this problem?

"About" says
System Version:
Mac OS X 10.6.8 (10K549)
Kernel Version:
Darwin 10.8.0

Not sure whether I'm pre 2007 - don't see anything in "About" - anything in system info that tells you?
Model Name:
iMac
Model Identifier:
iMac5,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.16 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
4 MB
Memory:
3 GB

TS4424 Anyone solve this problem on 10.6.8. Server?

Similar Messages

Maybe you are looking for