TS4424 This article tells you about what to do if you have version 4.5 and then forgets that and says make sure you have version 4.6?! Where do I get version 4.6. This article was no help at all thanks again apple, from loyal customer of 9 years!

help please

Hi yes I did that it didn't work, although I found a helpful link that did work!! Thanks for replying
Chris Beez
TS4424 Re: Mail failed after security update installed
Oct 13, 2012 5:14 PM (in response to rscottpearson)
I had the same problem. Download this security patch fromhttp://support.apple.com/kb/DL1586 and it will upgrade v4.5 to v4.6

Similar Messages

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?

Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

Please tell me about what is message control?

Please tell me about what is message control?

check this:
http://www.erpgenie.com/sap/sapedi/messagecontrol.htm
http://www.sap-basis-abap.com/sapfi023.htm
http://help.sap.com/saphelp_di46c2/helpdata/EN/c8/19878343b111d1896f0000e8322d00/content.htm

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

I live in vietnam and i use visa viet nam,i can buy app on appstore but i can't purchase in app, please help me! thank you

i live in vietnam and i use visa viet nam,i can buy app on appstore but i can't purchase in app, please help me! thank you

What happens when you try to do the in-app purchase, if you are getting an error message then what does it say ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users, we won't know why) : https://www.apple.com/asia/support/itunes/contact.html
If it's a different problem ... ?

I recently lost my iphone 4 and have an iphone3 on loan until I get upgrade in Aug. I want to sync my data - contacts most important - from my itunes account...is this possible? Is it possible to change the user ID on the borrowed phone to my ID?

I recently lost my iphone 4 and have an iphone3 on loan until I get upgrade in Aug. I want to sync my data - contacts most important - from my itunes account...is this possible? Is it possible to change the user ID on the borrowed phone to my ID?

There are no contacts in itunes.
Your contact should be on your computer in whatever program you have selected to sync. Just sync them to the new one.
Click Support at the top of this page, then click manuals
Changing the itunes account on nthe iphone is covered there as is restoring the iphone as new or from backup.

I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

I am getting this message when trying to upload an album to Apple from iPhoto - An error occurred when trying to contact the Apple on-line Store. Please try again later!!!

Do you mean trying to purchase an iPhoto book? Try rebooting and ordering again. If that fails Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
OT

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

Does anyone know what is the best version of word I can have on my older mac mini 10.5.8 PPC? I am running Leopard. Does anyone have it or know where I can get it please?

I agree with Grant. But to answer your question, that would be Word 2008. A quick search turns it up on sale at Amazon. You'll need to find it somewhere other than Microsoft itself, since MS stopped selling it when they released Word 2011.
http://www.amazon.com/Microsoft-Office-2008-Mac-Version/dp/B000WR2F2M

HT5633 I don't have a pairing code. where do I get this from

I don't have a pairing code. where do I get this from

Thanks. I came upon this before I asked my question and unless I'm missing it this doesn't answer my question.
I am aware of syncing, luckily it's easy enough for dummies.
I never had to use a code until I tried to Inc with apple tv. it is asking for a code I do not have and do not know where to locate it.
thanks for anyone that can give detailed instructions regarding my issue at hand, not the action of syncing.
TC

My iPhoto was deleted so I re-installed it, since then iPhoto will not say open more than 10-15 seconds. How do I get it to stay open and keep my pictures?

My iPhoto was deleted so I re-installed it & since then, iPhoto will not say open more than 10-15 seconds. How do I get it to stay open and keep my pictures?
It's a MacBook Pro, I got it last year (2010) not sure where to find the operating system info.
Please Please Please Help!
Thanks!
Katie

I always recommend backing up the iPhoto Library file under your Pictures folder first.
You can try removing the iPhoto Preference file in your User Library folder. Close iPhoto. If you are using Snow Leopard (10.6) click on Go in the Finder menu bar. Click on Library. If you are now on Lion (10.7), you'll have to hold Option key while clicking Go to see the Library selection. Once here, find the Preferences folder. In here, look for the following:
com.apple.iPhoto.plist
Move this file to the desktop. Start iPhoto and see what happens. If it is working, you can delete the file you moved to the desktop. This should not delete any photos, but will reset iPhoto as if it's the first time you are opening it (so your preferences you set may need to be set back).
If this doesn't work, let me know.

Hello.....my ipad is locked and i forgot the password! on my screen it says ipad is disable then under that it says connect to itunes! what do i do to unlock it?

Hello.....my ipad is locked and i forgot the password! on my screen it says ipad is disable then under that it says connect to itunes! what do i do to unlock it?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it.
This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Hi all, i am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.

Hi all,
I am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.

I too have the same error while installing xcode 4.2 in Mac os x 10.6.8.
Can any one solve this issue.

Hello, I have chnaged my computer 2 weeks ago and now I can't see my videos. I'm able to see only my CDs. Who can help me? Thanks in advance.

hello, I have chnaged my computer 2 weeks ago and now I can't see my videos. I'm able to see only my CDs. Who can help me? Thanks in advance.

No I didn't. I have just synchronized my computer with itunes and that's all. I also click to "allow this computer to use itunes''. How can I put my videos on the new computer? Franckly speaking I just use itunes for downloading and I don't know how to set up the options and so on.

TS4424 This article tells you about what to do if you have version 4.5 and then forgets that and says make sure you have version 4.6?! Where do I get version 4.6. This article was no help at all thanks again apple, from loyal customer of 9 years!

Similar Messages

Maybe you are looking for