TS4429 iphone loses service and won't reconnect since installing IOS 7

if my iphone 5 goes into an area of poor network connection and it 'drops' service (or shows 5 empty circles), when I move back into an area where coverage is better it won't reconnect unless I turn the phone off and on.  Have tried switching airplane on and off and resetting network settings to no avail.  Only started doing this since the upgrade to IOS 7.  Any ideas?

Hello papabearcreasey
Check out the General phone and connectivity issues section in the iPhone Hardware troubleshooting guide.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

  • HT4796 I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac.

    I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac

    You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
    Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
    http://support.apple.com/kb/HT4718

  • My iPhone shut off and won't turn back on.  What should I do?

    My iphone shut off and won't turn back on.  What should I do?

    sometimes if the battery drains completely you will need to leave it plugged into a charger for 10-15 minutes before you get any activity at all.  this is normal

  • I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.

    I have the new iOS 6.1.2 on my iPad.  My wifi connects to my home network but keeps dropping it and won't reconnect.  Did not have this problem with previous iOS.  Apple, you have a quality assurance issue.  Don't be like Microsoft where they send out pieces of junk with testing it.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iphone shut down and won't start up

    my iphone shut down and won't start up.  HELP!

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !

    Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !
    Even after many tries of sync, it won't work like before...
    Anyone had the same problem?

    Same problem here, but I found a solution that worked for me:
    Altered from original solution from Emily P:
    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Sync
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on, sync, and everything should copy back onto it.
    Working now !!!!!

  • Rand new iPhone 5s black, dead, won't power up after ios 7 upgrade...held down top button, held down home button...dead. Was fully charged, working fine tell said yes to upgrade. HELP!!!

    Brand new  iPhone 5s dead, black won't come on after ios update...is fully charged, was working fine till said yes to upgrade. Did not watch process beyond seeing Apple logo appear, left it alone, came back, dead. Tried holding top button, tried home button, nothing...HELP!!!

    If iTunes does not recognize your iPhone even if it’s plugged in, you may need to put it into DFU (Device Firmware Update) mode. If you have to put the device in DFU mode, you will most likely be unable to back it up.
    Hold Power button for 3 seconds and then the Power and Home together for 10 seconds (exactly).
    Release Power but keep holding home until the your iPhone shows up in iTunes.

  • I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for intallation. It shows it installed and won't let me install it.

    I am trying to re-instal Acrobat Pro on my computer after changing OS and resetting everything. I am using the CC panel for installation. It shows it installed and won't let me install it. I doubled check everything on my computer and it is not installed. Even more, all my PDF files now show an HTML extension rather that PDF and only opens in my browser, which means the program is not here.
    How to re-install it, please, when the CC panel installer won't let me do it? Thanks!

    Try "Pacifist"!
    Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

  • I updated my iPhone 5 yesterday and it replaced ios6.2 with iOS 6.1 has anyone had this problem?

    I updated my iPhone 5 yesterday and it replaced ios6.2 with iOS 6.1 has anyone had this problem?

    You are confusing your iOSs...
    Today iOS 6.1 was released... replacing iOS 6.0.2

  • Iphone 4 won't open after installing ios 7.1

    Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..

    Honsetly I do not know if they will charge you, however apple products usually have a one year warranty, such as your charging cable, might. But if you tried to use another charging cable then you will want to make an appointment with Apple. good luck

  • My Kodak AiO 3250 won't print since installing OS X Yosemite.

    My Kodak AiO 3250 won't print since installing OS X Yosemite.  I get error message on printer, "An unexpected error occurred.  Check for problem at the printer a ..."   Dialogue box ran out of space, couldn't determine the whole message.  I've contacted Kodak, no response so far.  Any other suggestions?

    Hi guys,
    This is not Apple's fault. Kodak is the one responsible for updating drivers for their new printers and from what I have heard Kodak is pulling out of the printer business and are behind on updating their drivers. This video on how to install a new printer might help and explains how sometimes old drivers can still work if you don't use air print.
    -crazy

  • Since installing iOS 7 messages randomly disappear from the message list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, send message and there are the messages.  'Fred' messages then re-appear in Message list. Why

    Since installing iOS 7 messages randomly disappear from the messages list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages.  'Fred' messages then re-appear in Message list. Why?  How to stop messages disappearing from message list?  Thoughts?

    Since installing iOS 7 messages randomly disappear from the messages list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages.  'Fred' messages then re-appear in Message list. Why?  How to stop messages disappearing from message list?  Thoughts?

  • My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

    You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

  • Iphone restart when i try edit photo after installed ios 5.1

    iphone restart when i try edit photo after installed ios 5.1
    what can i do to fix this problem???

    Problem solved
    thnx
    i reinstall the software again

  • Photos not as good quality and out of focus since downloading ios 7

    Does anyone else think the camera doesn't focus as good and pictures are blurred since downloading ios 7?

    You are not alone with this problem
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Try deleing all music and resyncing
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

Maybe you are looking for

  • Visual Studio - Column visibility - NOT based on a parameter

    I have several columns within a report that need to show / hide dependent upon the results of a query. I have tried using the following formula to no effect: Iif(Sum([FieldName].[Value]) = 1, True, False) I would expect this to show the column if the

  • How to generate a pulse train with different pulse width and delay?

    How to generate a triggered pulse train with different pulse width. for example, after each trigger signal, let's say 2 ms, then the counter output a pulse with pulsewidth of 1 ms, and then after 3 ms delay after the first pulse, the second pulse was

  • Script to export IDCS3 to PDF utilizing text from document as file name

    I have written a few very very basic scripts so I really only know enough to be dangerous. I tried searching the forums first but couldn't find a situation quite like this one. I have an IDCS3 file that is using data merge to create multiple files. A

  • Comparing scenarios from different time frame.

    I'm new to Essbase and analyzer and need help desparately.I'm trying to see whether it is possible to create an analyzer report that enable the user to choose and compare 2 different scenarios from 2 different month dynamically. In the sense that the

  • Disabling an item dynamically

    Hi I am using APEX on oracle 10g XE. and am absolutely new to this tool. I need to disable a set of input fields, based on the drop down value.( This drop down tem is right now set with 'Select with Submit' option. ) Depending on the value chosen by