TS4479 When plugging Apple TV into my samsung tv hdmi port nothing comes up. Actually my Sat TV plays on that same HDMI inport
When plugging Apple TV into my samsung tv hdmi port nothing comes up. Actually my Sat TV plays on that same HDMI inport
Check these troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Similar Messages
-
So when I plug my iPhone 3GS into my iMac, for music reasons, it says I have 123 songs. When I plug my iTouch into my iMac it says I have 565 songs on my iTouch. I have the same apple idea for both my iPhone and iTouch, how do I transfer my 565 songs on my iTouch to my iPhone? PLEASE HELP!!!
When you connect your iPad or iPod to the Mac, click on the device name in iTunes - don't click on the arrow on the device. Then click on the Music tab in the main window pane. Now you should see 'Sync Music' and all your playlists, artists and albums. Here you mark the checkboxes for what should be synced.
-
My av adaptor does not work. Tried to plug my ipad into my samsung hd tv and ipad said it does not support that accessory...help
What ipad, which model samsung? Are you attempting HDMI, VGA, or an RGB connection. Ipad 2 supports mirroring into an HDMI at an output of 1080. Ipad 1 is limited to only a few apps capable of the output, such as Youtube.
page64,65 of the latest ipad manual has more details.
Samsungs are good and should switch with the input - but sometimes you will have to select from the menu manually.
If in doubt, contact the customer support at samsung UK.
Also check - Settings/Video, that you have it enabled for Home Sharing. Apple Id which will be your .me.com email plus your apple ID password. I am not too sure about this as I cannot remember the exact order I set things up in - but page 89 of the manual references Home Sharing for sharing ipad/itunes content on a home pc/mac - so I would think it applies to content relayed to a tv or monitor too. -
When did Apple turn into piece of ****? It prompted me to update itunes and install icloud. I did. It crashed saying it was not properly installed and reinstall it. Since then I have been trying. I worry if my thousands of dollars worth of music is lost
I had a very similar problem, error 4251. (look in your log you will see that error) Since I finally fixed my problem, I thought I would see if I can help someone else.
What I found is that I lost burn ability in both iTunes AND Windows. Like you did. I did some digging and found that this wasn't hardware related at all. In fact, this boils down to a registry key getting messed up. (sigh) Yeah. It causes the system to get a bad 'handle'.
OK, here's what to try. Go to this Microsoft KB article. Scroll down and find the *manual* instructions for Vista. Delete the registry key that it specifies. Reboot. Now verify that you can burn in Windows. (If you have a RW disc, do a disc erase, or just try and burn from Windows Media Player.) If that is working now, you're on the right track.
Now the issue is that iTunes will still be broken. Go and install the latest Gear driver. (I know you may have done it, but do it again.) Now follow the intructions in this Apple KB article to verify the "GEARAspiWDM" info is back there in the registry. Now reboot. Try and burn in iTunes.
I hope this helps. -
My ipod touch 4th gen will not turn on, i have held the power and home buttons, i have plugged my ipod into itunes and tried again, yet nothing happens, what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When selecting playback from itunes library on Mac (purchased album from itunes!) i get random song played from that album and my selected song disappears from view. Nothing to do with shuffle.Mac OSX 10.6.8. Help, doing my nut in!!
What is your iTunes version?
If iTunes 11, have you checked the "Up Next" list? If it is not empty, try if clearing "UP Next" will help: -
No sound when plugging iPhone Headphones into 2009 13" Macbook Pro
If I visit the Preferences -> Sound configuration, in the Input tab is shows the microphone activity when I talk into the microphone portion of the ear buds. But there is no sound when playing music. Under both sections, Use audio port for: Headphones with Built-in External Mic.
It seems like it knows what I plugged in and seams to want to use it correctly, but I just get no sound. I've tried these ear buds in my iPhone and the sound comes out of the ear buds just fine.
I've tried another set of ear buds that don't have a mic built in, and those produce sound when plugged into the Macbook Pro and the "Use audio port for" is set to "Sound Output." This seems to be a problem with the earbuds that come with the new iPhones. They are the ear buds that also have a microphone in-line.
Is anyone else experiencing this issue? I'd really appreciate any help. I've played around with some setting to try and fix this. I've gone to audio midi setup and changed from 2-bit 16 to 2 bit 32 while the headphones are plugged in thinking that might have solved the problem after reading multiple forums, but that didn't help either.
I have Lion installed. 10.7.3. And it's a 2009 Macbook Pro 13" with only one external audio port.Not sure about your iMac problem, but from reading about 16 different websites, this is a very widespread problem. I don't know how you ever got it to work, but everyone with a new 13" MBP with the combined audio port is saying that you have to use one of those special cables that has more "rings" around it like the iphone headphones that have a built in mic to use line in. Read this article http://forums.macrumors.com/showthread.php?t=1389284&highlight=audio+in+from+ste reo where there are a whole host of people complaining about this. Apparently there are some aftermarket parts you can get to solve this, but if I was you i'd make a trip to an apple store if thats possible, or pick up the phone and call them and confirm whether or not this should work. It seems they are advertising line in, and that is not possible without a combination cable. Either way I hope this helps you. Sorry I couldn't be of more help than this. Definitely opens my eyes about a combination port though. Please post back with your results, as I am considering buying a macbook air, and would like to know what i'm getting into if i'm using a combination port.
-
Today, try to update, sync.... my ipod. When plugged it into my computer and opened Itune, my device never shown on the left side of the screen as it used to! Can not find it anywhere????? Could you give me a tip on this matter.
Hi there atangney,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
Can I plug Apple TV into a VGA monitor?
I'm considering purchasing an Apple TV. I do not own a TV, but I do have a large computer monitor which only accepts VGA input. Can I plug an Apple TV into it?
No, not without some form of HDMI to VGA/analogue audio converter which would be unlikely to be cheap. It would also need to support 720p input and HDCP to avoid oplayback issues.
You might get it working, but it may not be cheap or simple to do so.
AC -
Hi I tried to install ios7 last night and the ipod touch now has a frozen screen with the itunes logo and the usb logo I plugged the ipod into my laptop and tried to restore only to be met with the message 3194 error cannot restore this ipod please help thanks
Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2 -
When trying to log into App Store my keyboard does not come up and it asks me to paste password!
It won't let me log in...because it ask me to paste my password...I have no idea why it just started doing this!
Quit the App Store app and reset the iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
Trying to remote install OS X Snow Leopard, but nothing comes up to choose AirPort network when restarting computer..
This link will help you.http://support.apple.com/kb/TS2986
-
Tittle says all! I need help! The iPhone 5 will not do anything when pluged in. Please help!
That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.
-
My mac will restart & show Blue Screen when plugged ipod classic into my mac
When i plugged ipod into my mac and i put to the Disk Mode my ipod , the computer will restart & don't let me to restore my ipod !!!! Please help and give me a solution !!!
My ipod & mac info :
iPod Classic 160gb (2009)
Mac Book Pro (2011)
iTunes 11.1.3If your computer is a 2011, you can stop the blue screen by turning off graphic card switching. Under apple, system preferences, energy, uncheck box. Temporary fix. Your logic board may need to be replaced if you are under warranty or have apple care otherwise $1000.00. May be software or firmware problem but apple has provided no info. Replacing logic board has corrected problem for some users and not others. Everything I've mentioned only applies to 2011 MBPs.
-
I have a new Windows 8 laptop. I copied all of my music onto it. I then plug in my ipod and get "there's a problem with this drive, scan and fix now". When I click scan and fix it tells me "can't perform the check because Windows can't access the disk.".
I uninstalled iTunes and reinstalled it - but same problem.bump, I have same issue. thanks, MM
Maybe you are looking for
-
Just installed Red Giant Trapcode Suite, now AE CC will no longer import or recognize jpeg files?
Have tried trashing AE Preferences, deleting Media Caches, etc to no avail. Also get red outline or screens on AE Start Up or Quit? Anyone else experienced anything like this?? Installed on Mac Pro 4.1 running OSX 10.9.5, 36GB RAM, Nvdia Quaddro FX 4
-
Hi Experts, i have created a custom program by copying FP_TEST_00 and gave nodialog mode for out parameters which will supress the prompt for printer and that i can run it in background. i just want the data to written to spool. call function 'FP_J
-
CAT2 bapi_catimesheetmgr_insert Error when a day is missing -
I am using FM bapi_catimesheetmgr_insert to upload CAT2 timesheet data. The problem is when i try to add records tor 2 days - 24.11.2009, 26.11.2009 - (here 25.11.2009 is not being uploaded), the FM returns an error - Number of hours recorded 0.00 is
-
Regarding JDBC Driver Connectivity
Hi All, Presently we are using DB6 data base and how can i get JDBC driver information and connection paramters those are required for Implementing JDBC Adapters in XI. Please give u r inputs towards How can I find the connectivity details of Databas
-
Applying a new patch on the ISE 1.4.1. reboot required?
when applying a new patch on the ISE 1.4.1, will the server be taken off line whilst the patch is applied. i.e.does the server require a reboot after the patch is applied?