TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives,  states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX..  That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

Similar Messages

  • We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

    we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

    I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
    I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
    Anyway, I ran some commands and here are the results:
    megaraid -showstatus
    MEGARAID CLI version 1.0.12
    No cmd argument
    Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
    megaraid -showdevices
    Physical devices Available = 3
    Drive ID Identification Size(MB) Status
    0 Hitachi HDS722580VLSA80 78529 Failed
    1 Hitachi HDS722580VLSA80 78529 Online
    2 Hitachi HDS722580VLSA80 78529 Online
    diskutil list
    /dev/disk0
    #: type name size identifier
    0: Applepartitionscheme *153.3GB disk0
    1: Applepartitionmap 31.5KB disk0s1
    2: AppleHFSServer HD 153.2GB disk0s3
    /dev/disk1
    #: type name size identifier
    0: Applepartitionscheme *2.6GB disk1
    1: Applepartitionmap 31.5KB disk1s1
    2: AppleDriveATAPI 4.0KB disk1s2
    /dev/disk2
    #: type name size identifier
    0: untitled *467.0KB disk2
    /dev/disk3
    #: type name size identifier
    0: untitled *95.0KB disk3
    /dev/disk4
    #: type name size identifier
    0: untitled *95.0KB disk4
    /dev/disk5
    #: type name size identifier
    0: untitled *95.0KB disk5
    /dev/disk6
    #: type name size identifier
    0: untitled *219.0KB disk6
    megaraid -showconfig
    Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
    0 5 64 156958 Degraded
    megaraid -showapater
    FW Version = A130
    Bios Version = G117
    Product Name = MegaRAID SATA 150-4D
    Cache Size = 64MB
    diskutil checkRAID
    No RAID sets found
    Thank you for your help. I really appreciate it and so do the teachers and the students!

  • I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    tyler57,
    it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

  • Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

    This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
    This may help use diagnose this issue and your other thread's printer issues.
    Thank you,
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • I have a problem with my ipod. it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes

    it says connect to itunes but i cant because a pop up comes up saying "Itunes could not connect to the IPod because it is locked with a passcode. then it says to enter the passcode, i cant because it says connect to itunes. Please Help

    Place the iPOd in recovery mode and then restore via iTunes. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I use pages to draft forms that i repeatedly use in my business.  Last week i drafted a legal document and saved to my file. now i get message that it won't open without newer version of pages but i have the latest version  whats up??

    I use pages to draft forms that i repeatedly edit and use in my business.  Ex:  letterhead, envelopes, and legal forms.  I recently drafted a legal form
    for a client.  saved it and then reopened and printed the next day.  now when i try to open that form, ( or letterhead or envelope) i get a message that
    it wont open and that i need a newer version of pages.  but my pages software is up to date.   Whats up with this??

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Note: Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Everytime I click "Update Firefox," it starts to download said update, but never does anything else. I have also tried completely re-downloading a newer version of Firefox, but that doesn't work either.

    I have no more details.

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I have changed my Apple-ID to a new mail-adress. But I have not managed to change the adress in iCloud in my iPhone. The iPhone just asks for my password to the old Apple-Id.

    Hi!
    I have changed my Apple-ID to a new mailadress. But I have not been able to change the iCloud-adress in my iPhone. The iPhone just asks for my password to the old Apple-ID.  Can anyone help?

    If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have 2 IPOD touches and now an IPAD2;I use outlook calendar and contacts, and now my devices are not syncing all the information in the calendar. Help?

    I now have 2 IPOD touches , 1 8 GB,1 32G plus an IPAD 2 that I've been having syncing issues with.
    my Dell D830 Latitude w/windows XP. I use outlook calendar and contacts, and the syncing is not
    completely syncing the outlook information. Help?

    Yes.  Just sync them to the same iTunes library.  iTunes will keep track of each so you can put what you want on each.  I do this with a 3G and iPad2. Note that each device will have it's own backup.

  • HT5900 Hi I am in Ireland and while apple tv is very limited over here I still have one, My request please can u update apple tv to work as the app store I already subscribe to app which are not available in the updates you release can you fix this please

    Can you update the video and Tv series abilities of apple tv in Ireland

    First, not all features are available in all regions.  This is clearly stated on the Apple website.
    Second, these are user to user support forums.  No one here has any control over what is available on the ATV.

  • Portal Forms are not displayed in the new migrated environment.

    Hi All,
    We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
    Thanks in Advance,
    Tom

    Hi DIAdemUser1,
    This feature was indeed removed.  R&D felt like it caused more confusion than benefit, and I agree.  I do apologize to you and others who liked the feature that has now disappeared.  When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity.  I often miss that feature, but it's for the greater good.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ?  YoursdisillusionedbyLogic

    I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ? 
    I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
    YoursdisillusionedbyLogic

    Hi
    LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
    Some plugs are not currently available as 64bit versions: you may want to try
    http://www.soundradix.com/products/32-lives
    CCT

  • Install the new version of Logic 9 as update

    Hello everyone
    I just buy the upgrade from Logic 9, but wanted to know something.Can I install the new version of Logic 9 as update,without the need to remove the prior instalación of Logic 8.

    Logic 8 won't be removed, it'll still be there after the install.

  • Hello All, I have an older MAC and currently have iPhoto 09, version 8.1.2. Every time iPhoto is opened I get a message about a upgrade to a newer version of iPhoto, but when I select the link, it takes me to the Apple website and says the page I'm look

    Hello All,
    I'm Gene. I have an older MAC desktop and am running iPhoto 09, version8.1.2 (424). Each time I connect my iphone to my MAC I get a message that there is a newer version of iPhoto, but when I select the link, I am taken to the Apple webpage and get a message that the page I'm looking for is not available. All I would like to do is upgrade my iPhoto. Do I need to upgrade to the latest version of iWork, and if so, what version and how would I do that? Any assistance is appreciated. Thanks

    The iPhoto version that is currently available at the App Store os 9.5.1 and requires the Mavericks OS X.  The early 2008 24" iMac can run Mavericks.  Once you have Mavericks installed (it's free)  you can purchase iPhoto 9.5.1 from the App Store.
    If you don't want to upgrade to Mavericks you can purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com and install iPhoto 9.  Then up trade it to 9.4.3 via the updaters at the  Apple Downloads website: Apple - Support - Search
    OT

  • I saved a spreadsheet to iCloud now I can not access it.  The message I get say I need a newer version of Numbers but I already have it.  How do I get access to my document on iCloud?

    I saved a spreadsheet to iCloud now I can not access it.  The message I get says I need a newer version of Numbers but I already have it.  How do I get access to my document on iCloud?

    Please see this user tip:
    Need newer version of Numbers to open file

Maybe you are looking for