TS4505 Unable to connect to internet over Guest Network (Airport)

I have changed the guest network's DNS server IPv4 addresses to 75.75.75.75 and 75.75.76.76 and rebooted base station. These are the values for Comcast.
Still not able to connect to internet over this guest network.
Do I need to do anything else? Help!

Bob - thank you for your quick reply. My setup is as shown in the attached image:
My guest network is on the Apple Airport TIme Capsule (v7.7.2). Router mode for this time capsule shows "Off (Bridge Mode)" but grayed out. No edits possible as shown below:
Northbound of the Time Capsule is my Apple Airport Extreme (v7.6.4) that is in turn connected to a Comcast uBee DDM3513 Docsis 3.0 Cable Modem. I believe it is this one.

Similar Messages

Unable to access the Internet over 3G Network, Wi-Fi fine.

Hi there,
I'm unable to access the internet on the iPhone 3G over the 3G network. Wi-Fi is fine, no problems there, but every time I try to bring up a website in Safari over 3G I get the message "Safari can't open the page because it is not connected to the Internet".
I have Enable 3G 'ON' under Settings > General > Network, and I have full strength on the signal meter in the top left of the Home screen. I'm in a city (Melbourne, Australia) on the Optus network, so the network itself shouldn't be the issue.
I've tried resetting the Network Settings under Settings > Reset > Reset Network Settings, but it didn't change anything. Any other ideas?
Cheers.

Well, there you go, fixed! Called Optus Customer Service and they were actually helpful! Apparently there were "some components in their back-end that needed to be installed manually." The man wasn't sure why they weren't there, "glitches, blah, blah..." but at least they're there now and I have 3G access.

Wont connect to internet over VZW network

Ok so I just got my HTC Thunderbolt yesterday and it wont connect to the internet over the Verizon network. It works just fine when it is connected to wifi. I have tried turning the mobile network on and off and everything but it still wont.
BTW I can still call and text but everything that requires the internet does not work.

I live on the Fringe of 4G network. My Brother in law had this problem, and hit battery life was subpar.
This fixed it for him
Factory Reset his phone
He used the dialer and put in *#*#INFO#*#*
Changed the CDMA+LTE to CDMA Only (PRL)
Then his did his setup as usual, and so far he hasn't had any problems since. If you want to try that and see what happens by all means try it, but don't get mad at me if it doesn't work

Connecting to Internet over open network sometimes works, sometimes doesn't

I don't have internet where I live so I have been using an open network in the same building to connect. Sometimes I can connect to the network and the Internet, but sometimes I can connect only to the network and not the Internet. In this case AirPort status in System Preferences - Network says something like 'AirPort has a self-assigned IP address and may not be able to connect to the Internet.' Why am I sometimes able to connect to the Internet but sometimes not?

So it sounds like I can only use it when other people aren't? Or no more than a fixed number of computers?
Sounds to be the case, (any idea how many might be connecting?), but just thought of one more thing to try, when it's available but can't get an IP, choose "Other..." and type in the SSID.
Might give a try when it does get an IP, with this tool, to get an idea...
http://sourceforge.net/project/showfiles.php?group_id=25534

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

IMac G5 isight Can No longer connect to internet over Airport

I have an iMac G5 that has been working fine on my Airport Extreme wireless network for 3 years. Suddenly, I can no longer access the internet over my Airport connection. The computer is on my local Airport network wirelessly (I can access it from my laptop and share files). I can connect to the internet from 4 other computers connected to the same wireless Airport network (2 MacBook Pro's, 1 Powermac G4). In addition, if I connect my iMac to my laptop via a twisted pair ethernet cable and turn on internet sharing on my laptop, my iMac can connect to the internet. All systems are running 10.5.5 and no firewalls in place. I checked my internet preferences and they have not been changed from what they were before when it was working. DOES ANYONE HAVE ANY IDEA WHY SUDDENLY IT STOPPED CONNECTING TO THE INTERNET OVER MY WIRELESS AIRPORT CONNECTION?

I have just experienced the same situation. Everything was working fine and now I can't connect to my airport from my macbook pro. I also have an iMac G5 working perfectly well on the same airport.
Could it be a latest update that has caused the problem?

TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

TouchSmart 600 unable to connect to Internet & email accounts. Receive Windows Network Diagnostics error message "An unexpected error has occurred. The troubleshooting wizard can't continue" Error Code: 0x80070057. Using old laptop to send this message. Tried to restore back to a certain date but was only able to restore back to latest Windows download which did not correct my problem. Any help appreciated. Thanks.

I have the same problem connecting to the Internet that it is. It is more intermittent than permanent though. I have updated the driver from HP site, but no change. From the searches on the web problem seems more widespread though. HP do something! Please!

CS5.5 Subscription: Unable to connect to internet.

So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
When attempting to open any of the products, I get this message:
When I click Try Again, I get this one, which stays on this screen and never changes:
As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
Specs:
MacBook Pro 15" / Snow Leopard
Mac Mini / Lion
To reiterate, here are the steps I've attempted:
Repair permissions
Repair disk
Multiple restarts
Move from Wired to Wireless connection
Move from Wireless to MiFi connection
This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
This time around I noticed many other weird things.
Adobe updater disappeared from my mac.
Encoder refused to encode certain premeire sequences.
Premiere froze on export of those same sequences.
And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
I don't know if this helps but your problem seemed similar to mine.
15" Macbook pro 2.66 GHz Intel Core i7
NVidia GeForce GT 330M
OSX 10.6.8Snow Leopard
4GB DDR3 Ram

HT4623 iphone 5 unable to connect to internet

iphne 5 unable to connect to internet

I had the same issue and usually a reset of all the network settings on iphone did the trick.
this method did not work with my iphone 5 . i did something in router settings that seemed to change things a lot, for the better.
the wifi channel usually the routers use is channel 11, so i changed mine to channel 1. this solved my issues and the iphone connected just fine to the network, without restarting the iphone or resetting any settings or switching off and back on the wifi.
i am on 6.1.3 iOS

HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple.

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

When i try to load ios 7 to my i phone i receive error message unable to connect to internet however my internet is connected

I am trying to download ios 7 using i tunes application - get screen saying got download - press to download then recieve message unable to connect to internet please check connect and retry - however I am connected and so is my phone via wireless - I can not get past this error message please help. many thanks

Moved to Adobe Digital Editions forum.
Neil

Can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected

can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected, any help please ?

it's a downloaded file. When i failed to activate it, i tried it trial bs it's expired and i wanna activate it . The serial number is right but it keeps telling me unable to connect to internet :s :s

I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

I am unable to connect to internet through my TATA PHOTON + ZTE device.
Please help.

https://discussions.apple.com/thread/3680625?tstart=30
Best.

Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

Does the iPod connect to other networks?
Do other devices sucessfully connect?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

TS4505 Unable to connect to internet over Guest Network (Airport)

Similar Messages

Maybe you are looking for