TS4526 I followed the directions above and now I can't log back in.  Help.

When I type in my password and submit, I get a spinning circle then a message telling me that my apple tv can't access the itunes store.

you think maybe it's the wifi password it's requesting?

Similar Messages

  • TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

    I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
    V/r "TRACER"
    CDR Harold W. "TRACER" Valentine, SC, USN

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Today I tried to shutdown my computer and a window popped up saying that my computer could not shut down because the mail application was open, it wouldn't close, so I used a key combination to force mail to quit and now I can't log in. Help?

    Okay, so I have been having trouble with my mail application all week. The window refused to open and would not quit. Today, I tried to shut down my mac and a pop up window told me that I was unable to shutdown because mail was open. After using a key combination, I successfully was able to quit mail with force quit. Then I was able to shut down with out a problem. However, upon rebooting, my computer refused to let me loggin. I put in my password correctly but then the rainbow pinwheel showed up and stalled for a minute and then my screen flashed and the gray screen reappeared, expecting a password. I tried turning it off and back on again with no luck. I also reset my password after reading a similar discussion, but I still can't log in. How can I fix this?

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)
    Avast! Uninstall

  • My I phone just updated to the new iOS and now I can't log onto the App Store, any suggestions?

    My I phone will not let me lignin to the App Store since I got the new iOS update. Any suggestions on how to get my App Store to work again?

    Yes, yes, yes... I've gone through all the common sense trouble shoots. Would't be here asking questions if that answers existed on the net. Sorry if I sound a bit edgey, but I've had nothing but issues with every update since IOS 7. Clearly there's nothing that can be done about this. and this is the final nail in the coffin to try to make me buy an Iphone 5.

  • HT5625 I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    I cannot send a text thru iMessage.  I followed the directions over and over again but can't make it work.  Also how can I find out all the apple ids I may have.

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • HT5661 hi. I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening

    I am trying to set my ipad back to factory settings. I have followed the steps above and nothing is happening

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked

    I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
    It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELP

    uninstalled iTunes and all the recommended things
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

    I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

    HI,
    This post in in iChat (forum) but I have no idea from what you posted if it is about iChat and if so what account type you were changing the password on.
    9:25 PM      Wednesday; June 12, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT1657 I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it.

    I rented a movie and accidentally hit the menu button and now I can figure out how to go back and watch it . When I try to press rent again it says you have already downloaded this movie go to settings and check for downloads but I can find it download in settings.

    I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
    SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
    Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

  • I changed recently because apple ID not remember the password. More joined the icloud not changed, still with the old ID and now I can not delete the account because the icloud iphone app search I do?

    I changed recently because apple ID not remember the password. More joined the icloud not changed, still with the old ID and now I can not delete the account because the icloud iphone app search I do?

    What?
    Try posting in your native language, the above makes no sense.

  • How can you change the Itunes library? I updated it, and chose the wrong library, and now I can't change it helppppppp pleasee!!! D: ;(

    This *****! I updated my Itunes, and it asked me to choose a library, and I chose the wrong one, and now I can't change it. What am I supposed to do now?

    Firstly, I caution your approach to allow users to alter the orientation of the report. Crystal Reports doesn't adapt too well when the orientation is modified. You'll end up with fields dropped off on the right hand side of the report, or with a large gap on the right. Our engine doesn't do any auto adjusting of fields when you alter the orientation.
    In order to see the changes it is best to re-load the page and get a new viewer. You can choose to store the ParameterFields in a Session variable for re-use on the post back so your users aren't re-prompted for values.

  • How do you transfer Apple IDs from one ipad to another iPad?  I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

    how do you transfer Apple IDs from one ipad to another iPad?  I got the new ipad and gave my ipad 2 to my wife who had the first version and now I can't get my Apple ID off so she can use her Apple ID.

    You don't transfer Apple ID's from one device to another one. You sign out in the settings, )the App Store and iTunes if necessary) and then sign in with the other ID.
    Settings>iTunes & App Stores>Apple ID>Sign out. Them sign in with the other ID. You can sign out of the app store and iTunes as well by going to the featured Atab in the App Store and the music tab in iTunes, swipe to the bottom and access the Apple ID in there.
    You should have erased the iOad before you gave it to her in Settings>General>Reset>Erase all content and settings. That way she could set up the iPad as new with her own Apple ID.
    Be aware of the fact that if you use each others ID's in order to download past purchased content to your own iPads, you will lock yourself out of your own ID as you will have associated your iPad with the other person's Apple ID.
    In other words, if you sign into your wife's ID on your iPad so that you can download an app or an album so that you don't have to pay for it again, you will lock yourself out of your Apple ID for 90 days.

  • HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs.  Says it can find it and then leasds me to locate it.  I don't know where to look.  Help!!!

    I just updated iTunes to the latest version and now I can't play more than half of my songs.  When I click on a song it comes back and states that it can't find it and prompts me to try and locate it.  I don't know where to look.  Help!!!!

    Hi ldhong,
    There are a few ideas in this article on how and where to look for missing iTunes media:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Hope this helps!
    - Ari

  • I moved the project files and now I can't get them back into iMovie 11

    I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
    Someone please tell me there's a way to get the project files open again. Thanks

    enoughsaid3 wrote:
    ... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
    that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
    • on your Mac, Apps/Utilities you'll find Disk 'Utility'
    • on the left lane, you'll notice your connected hard drive(s)
    • select it, click on the 'erase' tab
    • NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
    that's why you should do it as step#1 after purchasing a new drive
    done ...-

  • TS2988 I had to reset my phone and I only have one of my ringtones I had 4.. Why'd it delete 3 and not the last one and now I can't get em back without paying for them again!!! What the **** is up with that??

    I had to reset my phone and I only have one of my ringtones I had 4.. Why'd it delete 3 and not the last one and now I can't get em back without paying for them again!!! What the **** is up with that??

    Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.

Maybe you are looking for

  • Desktop app startup problems

    When I try to sign in to my desktop app after I enter my email and password it loads for a bit then says, You have been signed out. Im trying to down load the Ps trial to practice for a school project and hopefully create some cool things. P.S. I kno

  • Function module updating the data base table

    Hi,   This post is regarding the function module not updating the data base table. I am calling the FM SD_SHIPMENT_HEADER_CHANGE inside the ZFM. It's returning success an changing the  table c_xvttk_new with the new TDLNR value. But it's not updating

  • ODI agent creation issue

    Hi, I am trying to create ODI agent in Windows. I have followed the steps in ODI set up document. It has launched the server. Now I am trying to create that as a windows service. But I am getting following error message. I ran the followiing the comm

  • I am have permission problems and need urgent help!

    I am running ppc G5 dual 2gig with Tiger 10.4.11. I must say that ever since I upgraded to this version from 10.4.10 my system somehow has been behaving poorly. Ist my network settings went weird in the fact that the PC (running XP service Pack 2) st

  • I've downloaded the 7.0.6 three times...still shows it needs to be downloaded

    Seeing the alerts...I tried to download the 7.0.6 download.  After each download and restart I'll look at updates...and it still lists the update.  So I download again....goes through the full protocol -- 3 times.  Still lists the update as needing t