TS4531 Bootcamp: Hdmi display not recognized windows 7

i have a late 2012 macbook pro retina with bootcamp windows 7 installed, when i try to connect a display on the hdmi port, nothings happen
its like theres drivers missing for the hdmi port. i tried all possible things, went to screen resolution options on control panel and connect external display options.

make sure you install the apple hardware drivers the correct video card driver is required to use external displays
one can make a driver stick in bootcamp on osx or one can download the zip file with drivers from apple

Similar Messages

Bootcamp Assistant will not recognized Windows 7 disc

I am running a late 2009 Macbook Pro with 10.8.2, trying to install bootcamp but when running the Bootcamp Assistant my Windows 7 - 64 Home Premium disc is not being recognized, I get a error " The Installer Disc Could Not Be Found Insert your Windows installer disc and wait a few seconds for the disc to be recognized"
The drive just tryes to run over and over but never mounts the disc.
Any recomendations?

make sure you install the apple hardware drivers the correct video card driver is required to use external displays
one can make a driver stick in bootcamp on osx or one can download the zip file with drivers from apple

HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

Hi Mac,
Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
Thanks in advance,
Ricardo Arguelles

Sordidloam wrote:
So to be clear, this issue occurs on any input with the Denon Receiver. Occurs from both HDMI out and MiniDisplay Port out. Goes away when we reinstall the OS and update it to 10.9.2. Comes back as soon as we update to 10.9.3.
Cheers
MLE
Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
KOT

Running Windows 7 via Bootcamp - USB Device Not recognized.

I am running Windows 7 64 bit via Bootcamp on my MacBook Pro (2012 non-retina display). USB devices are not being recognized within Windows 7 (USB Device Not Recognized error).
I have done some research and tried a few possible solutions but nothing has worked so far. Here is what I have tried:
- Uninstalling all USB drivers within windows and then restarting to let Windows re-install the drivers.
- Uninstalling Intel 3.0 USB Host Contoller and restarting Windows.
- Repairing the drivers using Bootcamp setup.
- Uninstalling bootcamp and re-installing bootcamp services.
The USB drives are working fine within OS X, just having issues in Windows.
Any suggestions?
Thanks in advance.

3.0 is on your OS X DVD. Clearly spelled out in the guide in Boot Camp Assistant, and here -
www.apple.com/support/bootcamp : manuals, look for 10.6 pdf version.
3.0 is pre-requisite for any other
OS X comes with Boot Camp Assistant and you access 3.0 drivers while in Windows.

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Qosmio X770 display not recognized anymore

I just bought a Qosmio x770 about a month ago and some day when I started it the login screen never appeared.
In linux left me in command prompt and said that no screen configuration was found.
Windows said nothing but the screen remained black.
After a number of reboots it worked normally but only for a couple of hours.
Plugged to an external monitor it works.
Also when I boot in safemode (or failsafe) it works (I mean I can enter windows/linux at 640x480 resolution).
I updated the bios to the latest version 1.30. What more else to try?
It's really uncomfortable to send it back because I need it for my job (even connected to another monitor).
My hope is that the problem is not hardware related and somehow I can solve it.
Is there a chance?
Thank you!

I reinstalled the windows driver in safe mode ... and nothing.. But I didn't do anything before the problem appeared ... And linux is not recognizing the screen also. I tried to boot from an external hdd and the same problem. Fn F5 show me only the external monitor. I tried some 3d games on the external monitor and everything seem ok. When connected to hdmi linux boots up in X Windows but when running nvidia-settings there is no internal display ... only the external one.
The strange thing is that the internal display is working in safe mode ... is it possible to be damaged then?
Thank you

Macbook Air hdmi display not detected

Hi, my 2011 Macbook is not detecting my hdmi display - the screen flashes blue briefly but no display is detected in system preferences or anywhere else.
Any ideas?
+I am using a mini display port to hdmi adapter with the thunderbolt output and I've tried rebooting with display plugged in and my osx is 10.7.5 Lion.
Any help appreciated

Actually I fixed it in the end by getting a new cable, it turned out that for whatever reason my cable was not up to the job.\
I found that a cheap £5 one piece thunderbolt male to hdmi male cable off ebay did the job well and it was my two piece - thunderbolt male to hdmi female attached to a standard HDMI to HDMI cable which caused the problem.
Seems like HDMI can be quite fussy and either it works or it does nothing, no in between.
So my fancy mac now works great with my cheapo alba hdmi tv i paid £25 for and carries both sound and video!
(I don't think I'll go back to windows if I can help it, not after using a mac. Once you've had a mac you realise what a pain in the a*s windows is .. I hardly ever feel like punching my mac )

USB Device Not Recognized - Windows XP

The IPOD 5G and my computer were working just fine until the computer stopped detecting the IPOD. I get this message:
USB Device not Recognized. The USB device attached to this computer has malfuctioned and Windows does not recognize itit. Try reconnecting the divice(ipod) If Windows still does not recognize it, replace the device."
IPOD still works and is recognized by my work laptop. What driver needs to be installed for the ipod to be recongized?
Help me
Windows XP

Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

5800 not recognized (Windows 7)

Hello,
my 5800 is listed as an "unknown device" in Windows' device manager. I installed Ovi suite before connecting the phone. The phone IS recognized when connected in mass storage mode, not so in pc suite mode. Servicelayer.exe is up and running. Any help, please?
Edit: Spoke too soon. I removed the phone from the device manager in an effort to let it reinstall drivers. Well, now the phone is not even recognized in mass storage mode, anymore.
Message Edited by sirlosealot on 05-Sep-2009 02:55 PM

same problem with WIN7-final (ultimate Ed.) for me...pls help... Nokia software is **bleep** again... Device not recognized.... PC Suite installed first.....30 minutes have passed and it says in Get connected - "Windows is installing PC connectivity drivers, please wait " ...I'm waiting for 30 minutes now... and nothing...
I'll try total removal in a few minutes if it cheeps this way.. .. It's always a problem with nokia software ... their programmers don't do a very good job...sadly ..

Thunderbolt display not recognized

i got this 27 inch thunderbolt. connected it to the imac (11,2 ) but somehow the display is not recognized. doesn't turn on. any ideas?

I follwed the instructions:
1. plugged in the power cord from the monitor to the wall outlet
2. plugged in the mag MagSafe Power cord from the monitor to the Mac Book Pro
3. Plugged in the Thunderbolt cord from teh monitor ot the Mac Book Pro
4. Chose Apple icon> System Preference and click displays
There is no "Arrangement" tab as indicated by the manual. the monitor is totally black as if there is no power. But the orange/green light on the MagSafe power cord is on.
I have undone and redone these steps several times, with the same result - a black screen. It is a Mac Book Pro 7.1
Any ideas?

Bootcamp / Vista: LAN not recognized

Hello,
my Bootcamp / Vista does not recognize my LAN/WLAN. I am pretty sure, that it is a driver problem, but where do I get the drivers from. It is said, that it is delivered with the installation DVD for OS X, but I can't find them.
Thanks for the help.
Regards, Stefan
Message was edited by: Hunter_I

Hi Stefan
the BootCamp Drivers are on the Mac OSX Install DVD that came with your Mac.
This disc is a "hybrid-disc" which contains a Mac OSX part and a Windows part.
The Windows part is only viewable while in Windows and does not show up while in OSX.
Regards
Stefan

Macbook Pro not recognizing Windows 7 RC 32-bit disk

I'm trying to install Windows 7 RC on my Macbook Pro but it's not recognizing the disk. Does anyone know why this is?

ucbound,
I replied in my post to your same question as well.
Are you using Boot Camp Assistant to set-up for a clean install of Windows 7 RC:
Start Boot Camp > Create Windows partition > insert Windows DVD > click 'Continue' after DVD icon shows on desktop?
Or are you receiving the error message after clicking 'Continue' in Boot Camp Assistant?
Others here are more experienced with the MacBook series so hopefully they will chime in at some point if it is an in-depth issue / resolution here.

Plugin not recognized Windows 98

I'm cross posting....
http://forum.java.sun.com/thread.jsp?forum=30&thread=462127&tstart=0&trange=15
Originally in Java Plugin - posted for four days, no replies. I'd like to get this working....Help is appreciated...
The jre 1.3.1_04 Plugin is not recognized by browsers Internet Explorer 4.0 and Mozilla 0.7 on a Windows 98 first edition (Java thinks this is Windows 95 - ?) machine. Using the applet tag in my web page.
I've installed a jre exe file that I downloaded from another computer. But the Internet Explorer browser still uses the MSJVM to load the applet. I see in the registry that class id - 8AD... does refer to the jre 1.3.1_04.
I've not had trouble on Windows 2000. How do I enable the browser use the Sun Plugin, not MS JVM on Windows 98?
I've researched the "enable browser" section of the sun java site, and followed all of the instructions there.
http://java.com/en/download/help/enable_browser.jsp
I've checked the troubleshooting section of the download for jre 1.3.1, nothing there helps me...
http://java.sun.com/j2se/1.3/install-windows.html#troubleshooting
Thanks in advance.

Thank you so much for your response.
I was just thinking about what a goon I am for cross posting. It is frowned upon in the forums (as it should be, and I should know better) and I was wondering if that is why no one would respond.
Yes I see that "Microsoft Internet Explorer" is listed in the Browser tab of the Plugin Control Panel. And I see that it is checked. I have restarted both the Browser and the computer several times since install but to no avail. I still see the MS JVM console in Internet Explorer.
Mozilla is not listed in the Plugin Control Panel, though I wouldn't expect it to be.
I remember reading somewhere that Windows 95 was not supported by the JRE but I think that referred to 1.4.2 specifically. I'm not sure if Sun stopped all support for Win 95. And though I have Windows 98 first edition, the effect of System.getProperty(os.name) shows "Windows 95". So this just may be lack of support for my OS system in general, but I don't know.
Thanks again for your post.

M90Z display not recognized after cover removal

Hard drive failed. Replaced with new SSHD 1tb drive. Cover not yet replaced (very difficult to accomplish). When computer is turned on to reboot, a message appears:
"No signal input.
please checkcable connection and / or
whether you are in monitor mode."
I cannot tell from the maintenance manual diagrams exactly which connection might be affected. Using front panel icons will turn off the message but does not show anything on the monitor. New hard drive seems to run, fan seems to run.
Recovery disk (on flash drive) in USB port is powered on but does not boot.
I have no idea what else to check, or how to do it.
Thank you for any help

Welcome to Mac-land.
This wouldn't happen to be a WD external drive, would it?
Is there some utility on your Windows laptop that you can use to repair the external drive? Something equivalent to Disk Utility on a Mac? I'm not a Windows guy so I don't know.
If the data is still on your Windows laptop, then maybe your Windows machine can erase the drive enough for you to get it to mount on your Mac.
Another option might be to see if your Mac will boot into recovery mode (restart and hold down ⌘R until you see the Apple logo), and then maybe Disk Utility (you'll find it when you boot into Recovery Mode) would be able to see the external drive and either repair it or reformat (erase) it.
Occasionally Techtool Pro 7 will be able to repair something that Disk Utility can't. Techtool is a good thing to have; it's the only third party maintenance/repair utility that you need. Techtool installs a repair partition (the eDrive) on your internal hard drive, similar to the recovery partition that is already there with Mavericks. So you might be able to boot into the eDrive and then see the external drive and either repair it or format (erase) it so it will show up under normal boot conditions on your Mac.
It seems less likely, but perhaps your external drive has chosen this time to die. If you can't get it to mount/erase/repair with either machine then that's probably what's going on.
Less likely than that, but still possible, is that the problem is with the external is in the enclosure itself, and not in the drive within, so if you can't get it to work any other way, it's worth a shot to remove the drive and put it in a different enclosure and see if it will work.

Bootcamp installation cd not recognized....., Bootcamp installation cd not recognized.....

My installation CD for WIN 7 not recognized in macbook pro (2011 model)
Its says insert disk and wait for it to be recognized...

Had installation files a setup and everything
Used poweriso and made a bootable DVD uif format...

TS4531 Bootcamp: Hdmi display not recognized windows 7

Similar Messages

Maybe you are looking for