TS4585 Servor Error when restoring backup

I have tried to restore a backup after my phone died from an IOS update.
I have tried at least 6-10 times on various different wifii networks and i get the same error message.
The back up processes for a while and trick you into thinking that its going to work but then 2mins in it says cannot restore backup Server Error.

Similar Messages

PSE 7 catalog error when restoring backup from PSE 5

I am attempting to move from PSE5 on XP to PSE7 on Vista using the backup-restore method, . Catalog is about 75 MB, data set is 56 GB, all stored on external USB drive. Tried restoring in new folder using both with and without restoring folder arrangement.
On PSE 5, most images were online, scattered across E: partition and external USB disk. Restoring to PSE7, files are all restored to a new directory OK, but new catalog lists all files in E: as offline. Let me repeat... the images are moved into a new folder on the new system, but are shown in the organizer as still on a non-existent E: drive on the new computer.
I am left with thousands of untagged images, all of them ther newest and most important in my system.

Mahlon,
First, some additional questions:
1. Did you do File > Catalog > Recover and File > Catalog > Reconnect before doing the backup? Thats very important.
2. On the old computer, was E: a partition on an internal drive, an external USB drive, or a network drive?
3. In the restored PSE 7 catalog, are the suspect thumbnails shown with a yellow question icon in their corner or a red circle icon with a line through it (like the international power symbol)?
4. When you say files are still recorded in the catalog as being on the E: drive, is that as shown in Folder Location view in the left-hand folder heirarchy pane, in the center Folder Location pane, in the Properties pane, or all three? (Check all three, because sometimes PSE will show different drive letters.)
> This will take a dozen hours on the old system, and I'm skeptical that it will work. PSE7 already converts the PSE5 database in or out of the restore. But it can't correct the pathname on the old system to indicate that the files are local and not offline.
Recovering the PSE 5 catalog, reconnecting missing files, installing PSE 7, and converting the catalog to PSE 7 on the old computer should take about 30-45 minutes (doing a second backup will take much longer).
Converting the catalog on the old computer is different than converting it on the new computer. PSE 7 has a different catalog format than PSE 5 PSE 5 uses drive letters to identify hard drives, whereas PSE 7 relies on serial numbers, and the internal database format is completely different. When you restore to the new computer and try to convert the catalog at the same time, the conversion needs to both update the new paths of all the files
and convert from the old catalog format to the new one, changing drive letters to serial numbers. But when you convert to PSE 7 on the old computer, the locations of files and drives havent changed its just changing the database format. So its entirely possible that conversion will go correctly. Then when you backup the PSE 7 catalog and restore it on the new computer, backup/restore is just changing the paths of files, not converting from drive letters to serial numbers or changing database formats.
So thats why its quite possible (though not at all guaranteed) that converting to PSE 7 on the old computer and then doing backup/restore could produce different results different process, different results.
You have two other options, both of which might lose tags or other catalog information:
1. On your new computer in its current state, reconnect all the files in the catalog to their new locations. Because they are marked as offline (assuming they actually are offline, based on the answers to my questions above), the Reconnect command will tell there is nothing to reconnect. However, you can force PSE to reconnect offline files using a trick described in step 4 of this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Quickly_reconnecting_la rge
This may or may not work, because its likely that the buggy conversion process has left your catalog in an inconsistent, unknown state, and there may be other problems still lurking. Also, persuading PSE to quickly reconnect whole folder hierarchies of files takes some patience (as youll see in the FAQ).
2. You can merge the PSE 5 catalog into a fresh PSE 7 catalog using this procedure: In PSE 5, save the tag definitions to a file, use File > Write Keyword Tag to write the keyword tags to the photos, copy the tag-definitions file and all the photos to the new computer using Windows Explorer, import the tag definitions into a fresh PSE 7 catalog, import the copied photos, and finally have PSE 7 automatically stack photos that used to be in version sets into stacks. These steps are described in detail in this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Merging_Catalogs
This FAQ is written assuming the source catalog is in PSE 6 or 7, but I think it should also apply to a source catalog in PSE 5.
There are a number of problems with this. First, its time consuming. Second, youll lose version sets, stacks of photos that are *not* visually very similar or taken close together in time, collections (albums), and projects. The PSE File > Write Keyword Tag command has numerous bugs (in all versions), and youll most likely lose at least some, and perhaps much, of your tags, star ratings, captions, notes, dates/times, and GPS/map locations. If you have raw files in particular, youll very likely lose much or all of the metadata, but depending on the source of your JPGs and other file formats, those files could lose much information too. See the end of this FAQ for more details on the known bugs:
http://www.johnrellis.com/psedbtool/#_Writing_File_Metadata

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

I upgrade my iPhone 4 to iOS 7, but cannot restore the backup "error when restoring iPhone (-1)", anyone know what should I do?

That error often indicates a hardware failure.Try restoring a few more times. If it consistently gives you that error, make an appointment at the genius bar to have it looked at.

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

RMAN error when restoring controlfile from tape

Hi,
We have a Production database with instance name PROD.
We use Symantec Netbackup software to backup this database to tape library.
We want to test some recovery scenarios on a test server. So we want to restore the production backups from Tape to this test server.
We did the following:
Cloned the ORACLE Home to the Test Server.
Changed the db_name parameter to PROD and also set ORACLE_SID to PROD.
then we connected to RMAN and ran the following command to restore the control files:
RMAN> run {
set dbid 4155532403
set controlfile autobackup format for device type 'sbt_type' to '%F';
set until time "to_date('16/12/2012:10:13:37','dd/mm/yyyy:hh24:mi:ss')";
allocate channel t1 device type 'sbt_tape';
SEND 'NB_ORA_SERV=riysvbkp-001,NB_ORA_CLIENT=lh-erp';
restore controlfile to '/testerp/dbexec/tmp/cf1.ctl' from autobackup;
executing command: SET DBID
database name is "PROD" and DBID is 4155532403
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
executing command: SET until clause
allocated channel: t1
channel t1: SID=171 device type=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.1 (2011082510)
sent command to channel: t1
Starting restore at 17-DEC-12
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 08:34:41
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <c-4155532403-20121216-01>
Here you can see that AUTOBACKUP is found but RMAN is unable to process the backup piece.
I am not able to see any errors in the log files. Please advise.
Thanks,
Muneer.

Thanks.
The earlier error is gone and now I am getting the following error:
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 14:34:25
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <c-4155532403-20121216-01> not found in NetBackup catalog

I get an error when restoring my ipad to factory setting

I get an error when restoring my ipad to factory setting

What does the error say?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Hello sir i have an error when restore occurred 2

hello sir i have an error when restore occurred 2 plz sir help me urgent

santoshchd wrote:
hello sir i have an error when restore occurred 2 plz sir help me urgent
More Details are required...
What are you trying to Restore and to what Device and what Exactly is the Error message / Alert you are getting...?

When restoring backup catalog conversion fails.

when restoring backup catalog conversion fails.

HI,
Could you please try the steps mentioned on the link http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-catalog-backup-conversion-elemen ts.html
-Harshit yadav

HT1414 How to fix error -50 when restoring backup file?

I'm fail to restore the backup file after updating iOS 4.32 to 6
I already backup it to iCloud before updating software, after finish update and it fail to restore backup and it show error -50
Is there anyway that I can retrieve the old contact?

Read here.
http://support.apple.com/kb/TS3694

[HELP] : error when restore data from server A to server B

Hello,i have troubles when restore FULL BACKUP from server A to Server B Please help me
when i Backup Full from server A ,i copy that Backup files to Server B (aa new server),i restore spfile và control file from BK files,then i mount (alter database mount ) to restore database , it show error message ORA-01103: database name 'ORCL' in control file is not 'DUMMY' , i tried to shutdown immediate and then startup mount again , but it show other error message RMAN-04014: startup failed: ORA-00845: MEMORY_TARGET not supported on this system
Please help me
Thank a lot

Filesystem 1K-blocks Used Available Use% Mounted on
shmfs 2097152 157532 1939620 8% /dev/shm
please give me answer a question : now , i have pfile initDUMMY.ora
DUMMY.__db_cache_size=13287555072
DUMMY.__java_pool_size=134217728
DUMMY.__large_pool_size=67108864
DUMMY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DUMMY.__pga_aggregate_target=13757317120
DUMMY.__sga_target=20602421248
DUMMY.__shared_io_pool_size=0
DUMMY.__shared_pool_size=6845104128
DUMMY.__streams_pool_size=67108864
*._controlfile_enqueue_timeout=1800
*._kill_controlfile_enqueue_blocker=FALSE
*._kill_enqueue_blocker=1
*.audit_file_dest='/u01/app/oracle/admin/DUMMY/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/product/11.2.0/db_1/dbs/control01.ctl'
*.db_block_checking='TRUE'
*.db_block_checksum='TRUE'
*.db_block_size=8192
*.db_domain=''
*.db_flashback_retention_target=10080
*.db_lost_write_protect='NONE'
*.db_name='DUMMY'
*.db_recovery_file_dest='/u01/app/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=1099511627776
*.db_ultra_safe='DATA_AND_INDEX'
*.diagnostic_dest='/u01/app/oracle'
*.disk_asynch_io=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DUMMYXDB)'
*.log_archive_dest_2='SERVICE=svrhst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_3='SERVICE=exthst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_dest_state_3='DEFER'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=34359738368
*.open_cursors=5000
*.os_roles=FALSE
*.processes=1024
*.recyclebin='ON'
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=256
*.sessions=2048
*.sql92_security=TRUE
*.undo_retention=2700
*.undo_tablespace='UNDOTBS1'
but i don't know why ? before i shutdown immediate (database states is nomount) , i show parameter MEMORY_TARGET , the value is 0 ?
Thank

Problem when restoring Backup from Tape...

Hi
I am getting the following error when I am trying to restore a backup from Tape on AIX system:
BR0279W Return code from 'LANG+C cd /oracle/RSD/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0': 0
BR0359W Restore of /oracle/RSD/sapbackup/.tape.hdr0 from /dev/rmt0 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0 failed
BR0236I Perfhaps volume initialization with option '-i force' required
I have initialized the tape before backup to label RSDB05 which I used while taking the backup.
When I initialized the tape as mentioned above with '-i force' then while restoring there is problem of timestamp.
How to restore the backup from tape now.
Regards
Chin2

Dear Ahamad,
In this command " brrestore -b xxxx.anf -m all -p /oracle/TRG/102_64/dbs/initSRC.sap " you are calling parameter file of source system initSRC.sap in which system is checking parameter/option 'compress_dir'. Please check if its same. Why you have replaced the SSID with TSID its not required at all.
Please follow these steps....
Place xxxxx.anf file in backup directory. check for parameters in initSID.sap file of TRG system. It should be the same as of SRC system.
Try again and post result if you are getting any error.
Regds
Anil

Restore database Error when restoring database to a new server

Hi folks,
I am oracle 10g on an AIX server (5.3).
I created an rman backup of a database. I then copied it over to a new server where I am trying to restore it (I just created the backup today). However, I am getting the error below.
Essentially, I used an initdb.ora file to create an instance of the database, and mounted it, on the new server. And then I ran a simple "restore database" command, the end of which is displayed below, with a "Restore complete. ..."
I have looked up this error (ora-01152) online and I cannot find a scenario which best provides me with a fix to my problem, about the file not being restored from a sufficiently old backup. Could any one help please?
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 06/14/2010 17:48:12
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DGROUP1/testdb/datafile/system.751.721679898'Edited by: efachim2 on Jun 15, 2010 2:19 AM

I ran only as below because I copied over the backup right after it finished, when there were no archivelogs.
RMAN> restore database;
Starting restore at 14-JUN-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=651 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=650 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=649 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=648 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00002 to +DGROUP1/testdb/datafile/undots1.667.721227421
channel ORA_DISK_1: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00007 to +DGROUP1/testdb/datafile/a1_x.641.721227553
restoring datafile 00009 to +DGROUP1/testdb/datafile/ent_sm01_x.659.721227557
restoring datafile 00013 to +DGROUP1/testdb/datafile/in01_x.657.721227569
restoring datafile 00015 to +DGROUP1/testdb/datafile/cs01_x.656.721227571
restoring datafile 00016 to +DGROUP1/testdb/datafile/cs01_d.650.721227559
restoring datafile 00021 to +DGROUP1/testdb/datafile/h01_x.644.721227575
restoring datafile 00023 to +DGROUP1/testdb/datafile/doc01_x.647.721227575
restoring datafile 00025 to +DGROUP1/testdb/datafile/og01_x.645.721227577
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full
channel ORA_DISK_3: starting datafile backupset restore
channel ORA_DISK_3: specifying datafile(s) to restore from backup set
restoring datafile 00003 to +DGROUP1/testdb/datafile/sysaux.662.721227423
restoring datafile 00006 to +DGROUP1/testdb/datafile/a01_d.639.721227549
restoring datafile 00010 to +DGROUP1/testdb/datafile/ent_lg01_d.666.721227423
restoring datafile 00012 to +DGROUP1/testdb/datafile/in01_d.658.721227511
restoring datafile 00014 to +DGROUP1/testdb/datafile/cs01_d.661.721227521
restoring datafile 00019 to +DGROUP1/testdb/datafile/ndata_x.654.721227423
restoring datafile 00022 to +DGROUP1/testdb/datafile/doc_01_d.660.721227531
restoring datafile 00029 to +DGROUP1/testdb/datafile/in01_x.642.721227471
channel ORA_DISK_3: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_4: starting datafile backupset restore
channel ORA_DISK_4: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DGROUP1/testdb/datafile/system.655.721227423
restoring datafile 00004 to +DGROUP1/testdb/datafile/users.653.721227453
restoring datafile 00005 to +DGROUP1/testdb/datafile/tools.663.721227423
restoring datafile 00008 to +DGROUP1/testdb/datafile/en_sm01_d.665.721227473
restoring datafile 00018 to +DGROUP1/testdb/datafile/n_data_d.664.721227423
restoring datafile 00020 to +DGROUP1/testdb/datafile/hfig01_d.652.721227527
restoring datafile 00024 to +DGROUP1/testdb/datafile/og01_d.651.721227535
restoring datafile 00028 to +DGROUP1/testdb/datafile/in1_d.646.721227469
channel ORA_DISK_4: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:27
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00017 to +DGROUP1/testdb/datafile/cs_lg01_x.640.721227579
restoring datafile 00026 to +DGROUP1/testdb/datafile/am1_d.643.721227581
restoring datafile 00027 to +DGROUP1/testdb/datafile/am1_x.671.721227581
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:07
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00011 to +DGROUP1/testdb/datafile/ent_lg01_x.648.721227421
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_1: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_1: restore complete, elapsed time: 00:02:30
channel ORA_DISK_3: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_3: restore complete, elapsed time: 00:03:15
channel ORA_DISK_4: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;

Getting a servor error when trying to open iCloud

Trying to update my iPad 2. When I try to log in to my iCloud, I get "servor error". How can I fix this?

See if the following posting helps: http://forums.adobe.com/message/4629442#4629442

WHEN RESTORING BACKUP OF ENTIRE LIBRARY, NOT ONE PLAYLIST HAS RESTORED!

my harddisk developed an unrepairable corruption, and i had to completely reformat and fresh install my operating system. I was able to backup my entire library onto 9 dvds (37 gig), but when restoring, the music rstored without problems, but horror of horrors not one playlist has appeared... this is terrible! Please help me anyone who can tell me how to rescue them. Is it necessary to restore the discs in a particular order? i.e. the last dvd first to be inserted for restore, or are the playlists somewhere on one of the dvds in a file? please please help.

I had this same problem. I just bought an aluminum iMac, and needed to transfer my music from my old Windows PC. I did the backup to DVD thing, and then followed the restore instructions to copy it onto the iMac. Everything got transferred perfectly, except for the playlists. Since I didn't want to redo them all, I got a little crafty and it worked!
1) Do the backup/restore, etc, according to the instructions here: http://docs.info.apple.com/article.html?artnum=302392.
To get your playlist, etc....
2) Quit all the way out of iTunes.
3) Go into the music folder and rename the "iTunes Library" file to something else. (I picked iTunes Library-old). Make sure this is the "iTunes Library" one, NOT the "iTunes Music Library" one.
4) Find the "iTunes Library.itl" file on your backup CD/DVDs. Do not run the restore again. Click cancel if the dialog box pops up asking if you want to restore.
5) Copy that file into the folder from step 3.
6) Start up iTunes, and you should see all your playlists
7) You will likely have a lot of files with an "!" next to them, so you will have to have iTunes "find" each of them.
-phae
Message was edited by: phaedre
Message was edited by: phaedre

TS4585 Servor Error when restoring backup

Similar Messages

Maybe you are looking for