TS5150 We just set up our Apple TV 3rd gen but not getting any sound. We have the boss system hooked up to the cable tv. Support could not help us, we were told to call Boss.

We just set up our Apple TV but not getting any sound. We have the Boss sound system. Support could not help us they directed us to call a Boss.

Do you mean Bose sound system? What model?

Similar Messages

  • Just set up our Apple TV and it works fine for NetFlix.  However want to stream photos and I Tune library from home computer but this computer accesses the internet thru a VPR at my wife's place of enployment. Other than a 2nd computer any suggestions?R

    Just set up Apple TV on home network. Works fine for NetFlix but we can't stream I Tune libruary or digital photos thru it to our home TV as because of my wife's work we bypass COX and access the internet thru a VPN offered by her employer.  Was told we either have to buy a second computer (two expensive for just these two functions) or keep turning on and off the VPN(not practical). Any other ideas? Thanks

    Does she need to access the internet through her employer, or is she just trying to access her internal network at work?
    If it's the latter, split-stream VPN clients (like Cisco AnyConnect) will split traffic so that only that directed at a particlar domain gets tunneled. 
    I have an AnyConnect client at home, but I normally only activate it when I'm using it, so I've never tested it with HomeSharing.  I'm currently traveling, but when I get home tomorrow, I'll try it out and let you know if it works.  If it does, your wife can check with her employer to see if she can configure AnyConnect to work with them.

  • We just set up an apple airport wireless router but i can't print from iPad to hp officejet all in one J4680.  the iPad is connected to  the network as well as the printer, but it doesn't print

    How can I get my ipad to print to HP J4680 through apples airport wireless router

    Hello ddoonis,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    Have a nice day,
    Mario

  • I have an iPhone 4s and not getting any sound from it, only during calls it works perfectly

    This getting me frustrated , when I try to turn it up the volume bar is blank and the sound comes on and off at times

    hello thank you for chosing the apple support community my name is jaydin can you please try the following
    :-D
    settings>generial>reset>reset all settings
    Message was edited by: Jaydin.c333

  • I can not get any sound from my Iphone 4. Everybody is calling me but the ringers does not work ...

    My phone does nor ring!!! Everybody is calling me and the ringer does nor worlk!!! Any sugestions?

    If it isn't on silent the speakers may have blown, if you live in the UK, you can visit the nearest apple shop and they should do a direct swap, you can also try this in other countries however I am not certain they will swap it.

  • TS4425 I tried this on my iPad.  The but did not get any terms and conditions.  Photo stream works fine on the iPad but not on Apple TV.  What do I do?

    Followed the instructions but they don't work.  On the iPad I got no new T&Cs and it works fine.  So I have no means to agree the new T&Cs and because of that it does not work on Apple TV. 

    Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
    Something along those lines anyway.
    I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
    AC

  • I just set up my apple tv and I have no sound. Please help.

    I connected my apple tv with hdmi cables and I'm not not getting any sound. Not sure what I'm doing Wrong.

    Did you connect it to the tv direct or through a receiver? If a receiver, you will need it on and switched under the connection.

  • Using Apple TV (3rd gen) as a remote speaker from original Apple TV (1st gen)

    Just got my new Apple TV (3rd gen) - discovered I can't AirPlay to multiple speakers from it like my old Apple TV (1st gen). As a workaround, can I use the old Apple TV just for music, using the new Apple TV as one of its airplay speakers? Can't seem to. The 3rd gen Apple TV doesn't appear on the original apple TVs list of airplay speakers. Any advice appreciated. Thanks.

    Thanks, and thanks for your reply.
    Yes, that does work - from iTunes I can see both apple TVs fine as options in the multiple airplay speakers - I was just really hoping to leave the main computer off and play my music from either the original apple tv's hdd or my iphone.
    Prior to buying the new 3rd gen Apple TV I had been doing that for a while, using the original Apple TV to airplay music to speakers connected to its own optical out and via airplay to an express in the dining room.
    It's odd that I can see both apple TVs and the express from the multiple speakers option from iTunes, but I can only see the express (and itself) from the original apple TV's multiple speakers menu. (Original Apple TV has been updated to latest software.) Maybe it's just too old to know about the new Apple TV.
    Has anyone managed to get an original Apple TV to airplay to multiple speakers where one of those speakers is another Apple TV?

  • Calling conn.close() not getting any response

    Hi All,
    I am using ActiveMQ
    I am facing a unique issue, my code calls conn.close() method. But it didnt get any response fro 2 days, I think at least I should get a time out exception, isnt it?
    To give you more details my applicaiton which calls this close() is in one network (DMZ) and activemq is running on different (internal) network.
    Can somebody please reply ASAP, as I am not getting any clue to resolve this.
    Thanks and Regards
    Raaghu.K

    The SAP XML Parser was not able to parse the reponse. So - I had to read the data on my own.

  • HT4437 I am just setting up my Apple TV and I can't locate the air play icon on my iPad.  Any suggestions?

    I am just setting up my Apple TV and cannot locate the air play icon om my iPad.  Any suggestions?

    Take a look at the short video at the bottom of this page link> Apple TV
    The answer you are looking for is depicted in the video.
    By Apple policy we want to let you know we might benefit or profit if you visit our link

  • I just set up an apple id acct n i verified the account but when i try to download a app it says my acct isnt verified. how do i fix that?

    i just set up an apple id acct n i verified the account but when i try to download a app it says my acct isnt verified. how do i fix that?

    - To change ID go to Settings>Store and sign out and sign in with the one you want. If you iPod has iOS 5 you may have to also go to Settings>iCloud and sign into the second account.
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • HT204053 We have apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do.

    We started with an apple computer and set up 1 apple id and for music on iPods.  Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones.  They said make seperate clouds?

    Hello there MizzouTrojan,
    If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
    iCloud: Share a calendar with others
    Share a calendar privately
    Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
    Note:    You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.” 
    Type the invitee’s email address in the Add Person field and press Return.
    Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only). 
    For each person you want to share the calendar with, repeat steps 2 and 3.
    When you’ve invited everyone and set their privileges, click OK.
    Invitation emails are sent from your iCloud email address to the participants you specified.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I have just set up my Apple TV, how do I set it to show my screen on my TV

    I have just set up my Apple TV, how do I set it to show my screen on my TV

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).

  • My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn't be completed. (CoreDAVErrorDomain error 3.) is shown?

    My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn’t be completed. (CoreDAVErrorDomain error 3.) is shown?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • I updated my apple tv 3rd gen to 5.1 just...after updating my trailers and photostream icons were gone. Had to facotry reset,then sign in again...after a while icons were gone again...

    i updated my apple tv 3rd gen to 5.1 just...after updating my trailers and photostream icons were gone. Had to facotry reset,then sign in again...after a while icons were gone again...

    First I would charge it for an hour and then:
    - Have you tried resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears
    - Next would be to place the ipod n recovery mode and then try to restore it via iTunes. For recovery mode see:
    http://support.apple.com/kb/HT1808

Maybe you are looking for

  • How to get the script of a table or view in SQL Developer?

    Dear friends/expert, Could you tell me how to get the script for a view or a table easily in SQL Developer like pressing F4 in TOAD? I found that I can press SHIFT+F4 for a view in SQL Developer and get the script of the view in Details Tab. But how

  • Transferring music from passport back to I-pod (classic).

    My music on my I-pod disappear when I downloaded the new software for the I-Pad2.  How do I transfer my music from my passport back to my ipod?  Thanks much!

  • Burning Music Videos to DVD

    Hi, I have bought Red Hot Chili Peppers "The Videos" and made a playlist. Now I want to burn a dvd, but can not find a way on how doing this. I also have Nero 7 Premium, but the tracks have DRM and Nero can not burn it therefor Any help is welcome Th

  • Process and Application Installation

    Hi, I am in the process of Application and Process scheduler Install and configuration. What should be an order: 1 . Install oracle client 2. Peoplesoft tool,appserv and file server. 3Tuxdo Please let me know the steps? Thanks, Mk

  • Send a single command to LTP Port

    Hello, I am still some what new to java. I have been looking and looking for a way to simply send the hex code 07 to my LPT port. When reading the documents provided by with the printer there is a simple way to it in doss. type "echo (press control+G