TS5180 When taking a incoming call, the speaker does not work

When taking a incoming call, if I put it onto the speaker, the incoming caller can not hear me, nor can I hear them, but the caller has not been cut off, if I turn off the speaker, the call returns to normal.

See Here  >  http://support.apple.com/kb/TS1630
From Here  >  TROUBLESHOOTING iPhone Hardware
http://support.apple.com/kb/TS2802

Similar Messages

  • I just bought the iphone 4s and when I have loss calls the telephone does not work?

    I just bought the iphone 4s and when I have loss calls the telephone does not work?
    i cant turn off, i cant do anything
    should I droop it?

    I know this sounds really basic, but did you remove the protective plastic film?  I was going to leave mine on for protecting the screen and had the same issue.  I removed it as it was the source of the problem.
    Good luck!

  • Speaker Does Not Work when i play music, video o make a call.

    When i play my music, video or when i make a call,  in my iphone the speaker does not work. I can make a call and have a conversation when i use hand free. When i change sounds in configuration the speaker does work.

    Hello there, Armando.
    The following Knowledge Base article offers some practical steps for troubleshooting issues with sound from the speaker on your iPhone:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Iphone 4 the mike does not work when making a call.  it does work with speaker phone and face time

    Just activated new Iphone 4 and the mike does not work when making a call.  it does work with speaker phone and face time. Any known fixes?

    My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often.  I called her iphone 4 at home from where I work 20 miles away on my iphone 5.  With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries.  This is a 10% sucess rate!!  I also could listen in real time from the wired work phone and the wired home phone.  She turned off 3G mode and it went to "O" mode at  the top left of the screen after the ATT.  In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time.  I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network.  If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring.  If the ring tone does not change after the 4th ring you get voice mail.  If the calling party does not leave a voice message there is never a missed call displayed on the iphone.  If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication. 
    This appears to be related to the time of day and the ATT tower that the receiving caller is using.  Tried other towers and it works in 3G mode 10 times out of 10 tries.  Apple replaced the first iphone 4 with a new phone, no improvement.  ATT replaced the SIM card and no improvement.  ATT so far is clue less.  This has been going on every since we got the new iphones which is 4 months.  The ATT web site also describes this same problem from several years ago.  Has anyone got better information?
    Thanks

  • My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

    My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.

    That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.

  • Why is it that when i am receiving a call the phone does not respond to my finger touch?

    Why is it that when i am receiving a call the phone does not respond to my finger touch?

    If the photos that you have on your iPad came from a different computer that may be why you are getting that message. If you have photos from a previous sync with iTunes you must make sure that you have those photos selected to sync again.
    In the photo below, I have a checkmark next to sync photos. The folder from which the photos are syncing is iPhoto on my Mac. You can also see that I have clicked - selected albums, events, and faces automatically. These events, albums, etc will sync every time the way I have this set up.
    I can also add new events or albums when I sync if I choose to do so. You have to select the other albums, events, etc. that you want to sync by putting a checkmark in the box next to the event and then click on Apply in the lower right corner of iTunes and they will transfer to your iPad.

  • When I switch desktops on iMac the speaker does not switch with it

    When switching desktops, the internal speaker does not work from one to the other.  I have to insert a ear piece end into the jack to get it to work....it is as if it is on mute when the speaker was working fine on the other desktop.  I checked the settings for sound on both desktops and nothing appears amiss.  What should I do?  I can get it to work by inserting the end into the jack but it is annoying for it to be done everytime I switch to my desktop.  I'm muted until I do!

    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Bought iphone4 and the microphone does not work only if we use in speak mode. How is it possible to fix

    I bought two  iphone4 in Miami and one of them appared a problem that the microphone does not work in normal call only if i use the speak mode. I am living in Manaus - Amazonas - Brazil and we do not have an apple store to complain it.
    Question.
    How is it possible to fix this problem ?
    Maria Filomena Kimura

    Unfortunately, the warranty is NOT international. You will have to send the defective phone to someone in the U.S. and ask them to take it into the Apple Store for replacement, then have them ship it back to you. Apple will not accept the International shipment, nor will they ship a replacement phone out of the country where it has warranty coverage.
    There are 4 carriers in Brazil who sell the iPhone, including one which sells it completely unlocked. You probably would have been better off to purchase them there if that's where you live.

  • I purchased Adobe CS4.  I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite.  What can I do?

    I purchased Adobe CS4.  I am now being asked for my serial number and when I put it in the program does not recognize it for Acrobat Pro 9 though it does for PhotoShop, Bridge and the rest of the suite.  What can I do?

    Contact support if you have serial number issues. Otherwise start by checking this stuff:
    Sign in, activation, or connection errors
    Mylenium

  • When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

    Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

    I resolved the problem. It was somehow related to my using Microsoft
    theme pictures. I set Windows to use the basic theme and the problem
    went away. Thank you for the suggestions.
    Jac

  • HT4628 The Wifi does not work when Macbook Air is started by Win8. How to let the Wifi work in Win8 ?

    Hi all,
    WIFI of Macbook Air works when the notebook started with OS X.
    But when I restart the Macbook Air with Win8, the Wifi does not work.
    The Macbook Air was bought last month. It is new model. The wifi may be a/c.
    Thanks,

    hey zyzzyxx, you're not the only one with this issue. it happens to me too. as soon as i unplug my cintiq via thunderbolt display my connection shoots straight back to having 20mbps down. i checked it using a speedtest.
    ever find a fix for it?

  • When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

    When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

    I have not changed any of my preferences and they look like they are as I would have left them.
    I tried resetting Firefox and deleting the preference file, no change.
    By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

  • I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    I imported a video and when I play it back, the audio does not match the video. When I view the tape in my camera it looks fine. I've tried imported twice and each time it doesn't match. What can I do to fix this?

    The default settings mostly likely use an audio sample rate of 32k. This doesn't work probably in FCP. You're probably better off capturing the tape in iMovie.

  • I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

    I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

    Hello there, graciecloyd.
    The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
    iOS: Understanding multitasking
    http://support.apple.com/kb/ht4211
    If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
    Check for app updates.
    Force the app to close.
    Restart your device.
    Update your iOS device.
    Learn more about troubleshooting apps.
    On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

Maybe you are looking for

  • Pop - gmail - mail no longer downloading after 10.5.8 update

    I don't know if it's related to the update - and I think I also updated safari (which I never use) but overnight my mail program has stopped downloading new mail from my Gmail account, which has always worked without a hitch. The connection doctor sa

  • How can I search the text of stored BLOBs

    I have an application that uses a jsp to insert BLOBs into a table and a servlet the selects them back out to display in a web browser. I want to be able to perform searches on the stored text of the BLOB. Does anybody know where I can go to get info

  • What is the limitation for no of systems in communication

    Hi All, I have a sudden change in my business requirement; here I need all you help in analyzing the feasible solution for the below business. Presently we are integrating between SAP-IS Retail to POS (third part system) using IDOC and file interface

  • Oracle for update no wait

    Hi All.. Can any one pls tell me in which case we need to use for update no wait in cursors. my understanding is for enable locks on top of records selected by cursor using for update. but dont have knowlodge on NOWAIT clause.Can any one pls tell me

  • 9.4.1 Shared Photo Streams - my Photo Stream stopped functioning altogether

    I've been experiencing unexplained problems with the Shared Photo Stream feature. After creating a new shared photo stream and adding a couple of photos to it iPhoto shows the number of shared pictures as 0. I eventually managed to get an album share