TS5209 I get the apple tv error 61 when I try to airplay from my macbook air. What is going wrong?
I get the apple tv error 61 when I try to airplay from my macbook air. What is going wrong?
Welcome to the Apple Community Cindy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)
Similar Messages
-
I'm getting the message -50 error when i try to export my project on iMovie '09. What does this mean??
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
free space on internal boot hard disk? How much ?
Video codec
streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
in what format ? .jpg, .bmp, .tif, else ?
Audio
from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
iMovie/iDVD preference file
The "com.apple.iMovie.plist" file or "com.apple.iDVD.plist"
Many users has not observed that there are TWO libraries.
_ Library - at root level
_ Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
Camera
External hard disk
USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
Mac OS - most probably X.7 or more
iMovie version - more than iM'11 v. 9.0.4
Action taken
Finalizing project - I never do as I never understood the gain to do so
Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set - I only use PAL (25fps)
Yours Bengt W -
Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I have 2 apple tvs. One in the bedroom, one in the living room. When I try to airplay from my iPad, only the bedroom icon shows up. How do I add the living room?
Firstly, go to http://iforgot.apple.com and sign in with the ID you use for iCloud. A new password will be sent to your associated email address.
If that doesn't work, for example because it's going to an address you can't access, then you will have to contact Support. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'. -
I have a Single-App subscription to the Adobe Creative Cloud.
According to this FAQ (link: http://www.adobe.com/products/creativecloud/faq.html#single-app) I should be able to publish unlimited single .folios with DPS with my Single-App subscription to the Creative Cloud. Here is the exact paragraph I'm refering to from that FAQ:
As a Creative Cloud member, do I have access to Digital Publishing Suite?
Digital Publishing Suite Single Edition is not available to free Creative Cloud members. Creative Cloud single-app and complete members have an unlimited Digital Publishing Suite Single Edition license. Creative Cloud for teams members also have an unlimited Digital Publishing Suite Single Edition license.
When I build the app in the DPS App Builder and reach the end of the process, I'm getting the error where it asks me to provide a Single Edition subscription serial to download the developer bundles for my app.
I have tried all the methods described on this forum to solve this problem, including deleting and reinstalling the DPS App Builder, deleting the old apps and creating new ones after redownloading the DPS App Builder, deleting the DPS App Builder, signing out of my Folio Builder in InDesign, redownloading the DPS App Builder, signing into my Folio Builder in InDesign again, etc., to no avail.
Can anyone help? This is a time-sensitive issue and I'm trying to get this app into the Apple submission process immediately. I can answer any questions if you all have troubleshooting advice for me.
Thanks,
DavidThank you for the information and the response. We will be upgrading to the full version of Creative Cloud to publish our single .folio.
I do want to remark on the issues created by Adobe's inconsistent explanation of how DPS can be used with the Creative Cloud. After reading that FAQ, I also spoke with an "Adobe Agent" through the chat system that pops up on various product pages and asked the agent as specifically as I could if the Single-app version of Creative Cloud would allow me to publish single .folios through DPS. In no uncertain terms the agent said the Single-app version would be fine, and referred me to the order page to begin the order process.
I spoke with another agent over chat in the morning on Saturday and they also said I should be able to publish single .folios with the Singe-app subscription to Creative Cloud. When I presented my App Activation problem to the agent, the agent said I should just wait 24-48 hours for my subscription to Creative Cloud to process so I could create my app.
This has been a very vexing process that has cost my team valuable app review time. If I had not encountered the FAQ and two agents who specifically told me that I could use the Single-app version of Creative Cloud to publish my .folio, I would have been happy to go straight to purchasing the full version of Creative Cloud.
Thanks again for the assistance. -
the sound on itunes has quit working but when i go to the internet and paly a song on say youtube there's sound.
Since iTunes 11.1 is computer based, you're saying this issue is on your Mac?
-
My iPhone is stuck on the Apple Logo and when I try to restore I get an unkown error (14) I dont know where to go from here there doesnt seem to be any other discussions like this
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
I need to download Runtime Engine 7.1, but I get a 404 error when I try to download from the website.
Are you getting it from this link (assuming Windows): http://joule.ni.com/nidu/cds/view/p/id/703/lang/en? The download link on that page seems to work just fine.
-
I have switched languages to french but get the "apple" beep sound when I run spellcheck not results at all?
You need to select the text and apply:
Inspector > Text > More > Language > Français
So Pages knows what language to check it with. Language is like bold or color or font, it is part of the text style.
Peter -
Why am I getting an ORA-04052 error when I try to compile a Procedure?
Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
BEGIN
dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
dbms_output.put_line(' ');
dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
FOR i IN cur_get_dependancy
LOOP
v_owner := RPAD(i.owner, 30, ' ');
v_name := RPAD(i.name, 45, ' ');
v_type := RPAD(i.type, 30, ' ');
dbms_output.put_line(v_owner ||v_name|| v_type);
END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
AND referenced_type <> 'SYNONYM'
AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again. -
Get file not found error when I try to sync
I get file not found error when I try to sync Iphone.
SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt -
I get 500 Internal Server Error when I try to go into Firefox. I aqm using Windows 7
I get 500 Internal Server Error when I try to log in to my Firefox Program. I am using Windows 7.
I have tried the updates, but still get the 500 Internal Server Error message.
Is there something I can do co correct this error so I can use
Firefox Again?I have this issue and believe it is related to a MALWARE virus that has affected my laptops registry. Any suggestions?
-
I am running OSX 10.8.3,when i try to open iDVD i get the initial screen but when i try to choose an option all i get is 'Downloading Themes' which just continues. I have left it for over an hour?
Where did you get iDVD to put on your Mac? The downloading themes are no longer available from Apple. If you copied it from a Mac that had all the themes look for the iDVD folder on that Mac which should be in the HD/Library/Applications Support folder or the Users/Home/Library/Applications Support folder. Copy it to the HD/Library/Applications Support folder for Mt Lion.
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT -
Apple ID couldn't be created because of a server error when i try to restore from a backup
Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud. -
I downloaded a trial version of Final Cut Pro X directly from the Apple website but when i try to open the file, a message is displayed saying 'legacy file should be converted' what can I do to fix it?
Where did you download it from exactly? URL.
Exactly what computer is this.
Maybe you are looking for
-
My iPod just randomly deleted all my music, but I no longer have the computer where I synced it to. Can I still get my purchased tracks if I download iTunes on another computer?
-
How do i get my bookmarks off of an old harddrive and transfer them to another harddrive?
the mother board died on my old desktop - but, the hard drive is still operable. I got a new desktop and a friend added the old hard drive from my old computer (that has all of my firefox bookmarks somewhere) to my new computer. I now have two hard d
-
Error capturing SOAP fault for Sync Messages
Hi We have a Sync interface which makes a Proxy call from ECC to PI and then PI makes Soap Sync call to Web application. We are having issues when handling Exceptions. Sender is getting misleading errors in response, even though they are application
-
[2013-06-12 21:52:15,554 IST] [INFO ] [.kernel.Default (self-tuning)'] [fatwire.logging.cs.install] READURL successful ReadURL for element OpenMarket/Xcelerate/Installation/AddACL?name=xceleditor&command=addacl&COMMANDNAME=READURL&USERNAME=ContentSer
-
CUA - Users not created in Central System
Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue. After performing SCUG - the users are brought into the central system BUT not created into the central system. For example: Child system is CLNT100 Parent system