TS5376 iphone disappeared in itunes after updated to v11.1.4.62

After updatded itunes to 11.1.4.62, itunes didn't start automatically after my iPhone 5 been connected to the computer through USB cable. iPhone didn't appear after itunes has been mannually started up. No connection and no synchronize can be made between iPhone and itunes.

Does the iPhone appear in iTunes at all? Or is the problem you are having is that iTunes just does not automatically start? If you removed and reinstalled iTunes in the order specified in the support document, it should have worked. You can try this support document and see if that helps. http://support.apple.com/kb/TS1538

Similar Messages

  • Error message when syncing iPhone 4 to iTunes after updating software on both OXE800001

    Help
    Just updated software for both iPhone & MacBook iTunes and since receive error message oxe8 etc. have tried all recommended steps but do not work. Has synced wirelessly ok & iPad seems ok as well

    TehCanadian wrote:
    unknown error 13019
    try if the troubleshooting steps in this support article help.
    JGG

  • Playlists disappeared from iTunes after update. Can I get them back?

    All my playlists disappered from iTunes. I'm running Windows7 Pro. I must have lost the playlists after an update. I haven't listen to iTunes for a couple months, mostly Pandora, but yesterday I went back and all my playlists were missing. --- I do remember an update some time back.
    I tried to find an answer by Googleing my problem but nothing worked or was applicable. I found solutions that were older and that had tips like "Go under File in the menu bar and import...".
    For some reason I neither have File nor a menu bar , nor an import option. I can't even find out what version I have - but you can assume it is the latest because I always click OK when Apple throws an update at me.
    Do I have to start over or can I get my playlists back?  ---- I have used an assortment of  media players in the past. Mostly some smaller but brilliant ones and something like this never happened. I'm not sure how I feel about this happing with Apple's iTunes.  Usually I would have thrown it out but I need iTunes for my  iPod and iPad and I'm about to purchase an iPhone. So I can't let this one go.
    If I can restore it - or even if not - , I will make sure I do a back-up for my playlists. I have never done a back-up for PLAYLISTs in the last 15 years (!?). But from what I read some people recommended it for iTunes. I would like to add this question to my original problem: how do I make a backup of my playlists? Do you do it too? Is it REALLY necessary - or can I plow on more or less safely for the next 15 years?
    Thank you in advance for your help.

    Mietz wrote:
    Never mind - I figured it out and got my playlists back.
    Good news, but for anyone else with the same issues this may help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be copied & renamed as iTunes Library.itl to restore the library to an earlier state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
    If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
    tt2

  • Can't sync iPhone/iPod to iTunes after update?

    After the latest iTunes update and I am not clear on how to sync my iPhone or iPod to iTunes. When I plug either of them in they charge but do not start up in iTunes at all. I have automatic syncing turned on but nothing happens. In the previous versions whenever I would connect a device a bar would pop up where I could change my syncing options for that particular device but not since the update. I do not like this new iTunes at all, I don't think it's very use-friendly and I'm still working out how to navigate it so maybe I'm just missing it altogether. Any help would be appreciated.

    I found removing everything apple related and re installing itunes fixed it for me...
    just go through your add/remove programs and ANYTHING apple related including bonjour   then re install itunes and connect your device.
    Hope this works for you.

  • Iphone disappears from itunes after wifi sync

    I've been struggeling to get wifi sync to work correctly with my iphone 4.  I have the newest version of itunes on a Windows 7 PC.  When I first open itunes it sees my iphone over wifi and syncs successfully.  A couple minutes after syncing completes, itunes loses my iphone.  My iphone still shows up under devices, but if I click on any of the tabs in the device it then brings up the dialog box searching for the phone, then it tells me it cannot find it and it disappears from devices.  If I close itunes and reopen it the iphone shows up again and syncs.  Any idea what could be causing this?
    So far in my quest to make this work I have opened ports 5354 and 27015 for inbound TCP.  I have also set the Bonjour and Apple Mobile Device services to Automatic Delayed Start as mentioned in other threads. 

    It seems like it periodically reappears in itunes, but then if I try to sync or do anything its says "looking for iphone" and eventually tells me it can't be found on the network.

  • After restoring my iphone 5 though itunes after updating to the new ios and setting it up as an existing iphone, i unlock my iphone and it tells me i have to connect it to itunes and set it up again but it just stays stuck saying connected to itunes

    i just updated to the new ios version, and now i cant set my phone up as an existing one. i have put it in recovery mode and tried to restore it but it wont work. Itunes will let me set it up as an existing phone and back up all my data but once i unlock my phone it goes through the setting up options and then asks me to either set up as a new or existing phone and when i choose existing it just says connect to itunes and does nothing. can anyody help?

    Seems like you are restoring from a blank back up if it is still asking you those 3 options of set up as new, restore from itunes or icloud back up. Set the iPhone up as new then manually restore from a back up. Follow the steps foriTunes 10.7 or earlier in the article below as it is the same process for iTunes 11:
    http://support.apple.com/kb/ht1766
    When you do this you will be able to check for backs showing date and time. Be sure to choose a back up made before you restored to factory settings.

  • HT1937 I tried to update software on my Iphone 3 from Itunes after i managed to sync phone to laptop but then i had a message (error 1015) after completing saying itunes has detected an iphone in recovery mode, i am now unable to do anything with my phone

    I tried to update software on my Iphone 3 from Itunes after i managed to sync phone to laptop but then i had a message (error 1015) after completing saying itunes has detected an iphone in recovery mode, i am now unable to do anything with my phone, please help!!

    You generally get that error code on a jailbroken phone ?
    If it is Jailbroken then I am afraid you will get no help here.

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • Iphone 3gs need activation after update by itune and no service

    iphone 3gs need activation after update by itune and no service
    what can i do ?

    No need to Multiple post... see your other Thread...
    https://discussions.apple.com/thread/5846382?tstart=0

  • Help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen

    help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
    pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!

    Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?

  • My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

    My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps..
    But... if the Device has been Modified... this will Not necessarily work.
    Unauthorized modification of iOS  >  http://support.apple.com/kb/HT3743

  • Sync session failed to start in iTunes after updated to iOS 7

    Sync session failed to start in iTunes after updated to iOS 7

    Restart your computer
    While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
    After you are done doing that, restart your phone.
    Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
    When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

  • Have a error code 4013. iphone 4s wont restore after update.

    my iphone will not restore after update. it is stuck in recovery mode. i get error code 4013 everytime a try to restore but i cant find anything on error code 4013.

    DFU mode is also good as stated above, however the instructions for DFU mode are below (please note this is not the same as recovery mode) -
    Plug your device into your computer.
    Turn off the device.
    Hold the Home button and Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
    Make sure the device screen is blank and no logos are present, device screen should remain black.
    Error 4013 is due to security software issues. Uninstall all security software completely, try again, if the issue persists I would either recommend another computer or calling AppleCare tech support at 1-800-APL-CARE (for US customers).
    Note- this is even if your device worked fine prior to iOS 7 update with your security software. The change in the operating system on the device can cause compatibility issues with these other programs.
    I hope this helps it worked for me!

  • My iphone 3g got locked after updating

    my iphone 3g got locked after updating the software and showing usb cable and itunes symbols

    That means your iPhone was hacked to be unlocked for use with any carrier's SIM card, which is not supported by Apple directly or indirectly via these discussions.
    Installing a firmware update on a hacked iPhone or restoring a hacked iPhone with iTunes relocks the iPhone to the carrier the iPhone was sold as carrier locked when new.

  • Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2

    Why isn't my Ipod nano 6th generation being recognized on itunes after updating software to 1.2?

    I found that all the movies that I want on my nano have iTunes extras.

Maybe you are looking for