TS5376 itunes 11.1.4 fix for Windows

I am unable to uninstall the Apple Mobile Device Support from my PC which is necessary in the fix for iTunes 11.1.4 for Windows. Can anyone help?

If the "Repair first, then try an uninstall" trick didn't work for you, try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

Similar Messages

TS5376 iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
tt2

ITunes 11.1.4.62 for Windows Breaks iTunes Match

After upgrading to iTunes 11.1.4.62 for Windows 7 Ultimate 64-bit, my iTunes Match no longer works. It insists that I pay for another subscription even though I have a valid subscription already. This issue has been going on for over a week with no response from Apple Support. Is anyone else experiencing a similar issue? What can I do to remedy this problem?

I use a utility called ByeTunes that removed Itunes completely of my pc "It's free" and got a good down load of Itunes.a few weeks after they correct the upgrade.LOL

Error - iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3 ???

In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3.
I've tried changing permissions and sharing - nothing seems to work. mat be a Windows 8 issue???

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

Microsoft releases fix for Windows Update corruption errors

See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
The Microsoft KB article is found @
http://support.microsoft.com/kb/947821
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Hi Rick,
Really thanks for your sharing.
This will definitly help others in this forum.
Kate Li
TechNet Community Support

MBR fix for Windows 7 thinkpads?

I really need to resolve this issue. My MBR is "broken" (restored to a non-lenovo stock Windows 7 MBR) and now all my lenovo software and a lot of my hardware's software won't work. e.g. Intel graphics control panel, lenovo system update, lenovo power manager, etc... While loading any of these, I get "<application name> has stopped working....".
Background:
I previously removed a dual boot of Fedora I installed. However, the grub boot loader remained and I wanted to get rid of it. Normally Lenovo's Rescue and Recovery can be used to restore the boot loader (and remove grub), but I couldn't load R&R nor install a newer version. From what I could understand from reading online, R&R required the lenovo boot loader installed to work properly so I couldn't use it to restore my boot loader - a classic Catch 22.
I decided to borrow a windows 7 CD to use the repair feature. It worked by restoring windows 7's boot loader. However, ever since I did this, a lot of the preinstalled applications I listed above do not work anymore. None of the lenovo software work for sure. I have tried to reinstall some with no luck.
My best guess is that I can't use Window's MBR, but instead need to restore Lenovo's MBR / bootloader. However, after a search online I found Lenovo only provides the MBR fix for windows XP and 2000, not 7.
Any suggestions?

Fixing the MBR shouldn't alter the functionality of programs, unless you've changed the drive letter somehow.
Reinstalling R&R within Windows should get it to work again, though.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How To convert mp4 to mp3 using itunes 11.1.3.8 for windows

How To convert mp4 to mp3 using itunes 11.1.3.8 for windows

pgyan wrote:
How To convert mp4 to mp3 using itunes 11.1.3.8 for windows
The normal situation would be wanting to convert .m4a (AAC or Apple Lossless) to .mp3 as these are both music file formats. The extension .mp4 is normally for a video file and iTunes itself will only convert music files from one format to another.
For details on how to convert between music formats see http://support.apple.com/kb/ht1550
If you want to convert the audio track of an .mp4 video to a .mp3 file then you are going to need to use a different utility.

I cant play any movie on my itunes 10.5.2.11 for windows

i cant play any movie on my itunes 10.5.2.11 for windows even the .mov files ?? i cant also drag any videos to the liberary .. just music ..whats wrong??

The supported formats are listed on Apple's iPad webpage -> http://www.apple.com/ipad/specs/
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
So, it would have to be in one of those formats. It can be a little confusing because the extension doesn't always tell you the codec that the video inside that file needs. You'll probably have to transcode the video with some other application or recreate it yourself.

I have recently downloaded itunes 10.3.1.55 for windows xp but it does not seem to open

I have recently downloaded itunes 10.3.5.1 for windows xp but its does not seem to open

Have you tried delting the download and downloading it again?
What happens when you "run" the download?

I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

TS5376 Trying to update iTunes to 11.1.4 for Windows has still failed after following detailed directions

I followed the directions provided by Apple personnel to help resolve this issue: http://support.apple.com/kb/TS5376.
The resulting errors include;
Runtime Error! Program C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the applciations's support team for more informaiton.
That was followed by: the iTunes warning:
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services.
That was followed by the Runtime Error message two more times.
Followed by iTunes was not installed correcdtly. Please reinstall iTunes. Error 7 (Windows error 1114).
NOTE: before this load attempt I
Made sure I had Administrator rights
Fully removed iTunes
Manually removed any lingering iTunes files as per the instructions
Right mouse clicked on the downloaded exe to make sure I was Administrator.
Nothing seems to work. It was FINE until this new "upgrade". Any suggestions

See Troubleshooting issues with iTunes for Windows updates.
tt2

When will Apple fix iTunes patch 11.1.4 for Windows?

More a post for any Apple admin who see this: Clearly your latest iTunes update has problems. How soon can we expect this problem to be fixed?

You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
tt2

Need to find a fix for Windows XP 64bit

I just don't understand how apple has negeleted to make a download version of Itunes to work with Windows XP 64-bit OS. It seems to me that I'm not the only one here that feels the same and has had issues installing Itunes on there machine. I just purchased a new machine over the weekend to find out that Itunes doesn't work. No where in the specifications of the IPOD touch does it say it doesn't operate with Windows XP 64bit. It just says Windows XP. Is there going to be a fix for this? Let me know if any one has found a solution to this matter.

Apple has never supported the 64-bit version of Windows XP, and at this point probably never will since Microsoft themselves are dropping support for it. If you search the iTunes for Windows forums for "XP 64", you'll find threads discussing how people have managed to "crowbar" the version of iTunes for 64-bit Vista and WIndows 7 to XP 64, but the level of success has been less than 100%.
There are third-party utilities such as MediaMonkey, Anapod, Ephpod, or Xplay for handling transfer of content to your iPod . I haven't used any of these, so I can't make any recommendations. These applications cannot connect to the iTunes Store, so you will not be able to purchase content from the Store. The applications may also may not work with the most recent iPods, so confirm compatbility with your iPod model.
Upgrading to Vista or Windows 7 will probably be your best option for the long term, though.
Hope this helps.
Good luck.
Message was edited by: Dave Sawyer

No AirPlay button in iTunes 11.1.3.8 for Windows 7 64-bit

Hi guys,
I cannot figure this out - I tried everything I could think of...
I have my main iTunes library available for Home Sharing - now iTunes for Windows does not appear on AppleTV, iPad or iPhone in Remote or Music or Video at all. Moreover, its own Airplay button has disappeared.
I tried the following:
1) Disabling Windows Firewall - didn't help
   2) Uninstalling iTunes, Bonjour, Apple Mobile Device Support, Apple Application Support - didn't help
   3) Rebooting router altogether - didn't help
   4) Signing out of Home Sharing, disabling sharing library and enabling all back - didn't help
I know that the problem is not with iOS or ATV - I can use Remote from iPad or iPhone to control ATV. However, iTunes for Windows simply does not appear in Remote application or anywhere else. It also does not have a button to Airplay to another device.
The router configuration didn't change and rebooting didn't help. All devices are on the same network - iTunes and ATV on wired, iPad & iPhone on wireless.
It used to work until the whole iOS 7 and related iTunes updates. Has anyone seen such a problem? Any ideas? Please?..
Maksym

Hi guys! I have just found a solution in a different thread - huge thanks to Toploader21120:
1) open control panel.
2)Choose Network and internet
3)Select the VIEW NETWORK STATUS TASKS under NETWORK and SHARING CENTER section
4) Choose the active network connection. It is usually name " wireless Network Connection 1" or something similiar.
5) Click the properties button
6) If the Internet PROTOCOL VERSION 6(TCP/IPv6) is checked, uncheck it, then click OK.
7) Click CLOSE
8) Restart iTunes and try to use the Home Sharing feature again.
Apple dudes, please, do include it in FAQ!

Itunes 11.0.2 installer for Windows 7 (64 bit) freezes?

I'm having a problem installing iTunes 11.0.2.26 on Windows 7 64-bit. I have tried both the automatic updater and a full uninstall/reinstall with a standalone instalation. It seems to get stuck around the same point. If I try the automatic updater first Safari installs then iTunes starts to install. The iTunes installation gets to around 90% then the installation stalls. There is no error message and the installer just says "Installing..." but the CPU usage drops to 0% on both cores. I have left the installer sitting like this for hours without it finishing. I have not heard anyone else complain about long installation times or stalling. A very similar problem happens if I try to uninstall and then do a standalone installation. The installer gets near the 90% point on the bar and then the process just stops and hangs. If I try to cancel the installation at this point, the installer will stop responding and then I have to end the process. Any help on this frustrating issue would be appreciated!

You can try downloading 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). You may get a more useful error message as to which component has problems.
tt2

TS5376 itunes 11.1.4 fix for Windows

Similar Messages

Maybe you are looking for