TS5376 Tried Apple's fix for MSVCR80.dll missing, still getting error

I found this fix:
http://support.apple.com/kb/TS5376
I removed the dll's as instructed, uninstalled iTunes from Control Panel, redownloaded the 11.1.4 installation file, saved and executed it, and successfully reinstalled iTunes.
But when I try to start iTunes, I still get this error:
"The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem."
I've been running iTunes on this Windows 7 machine for years, I've upgraded iTunes via Apple Software Update many times, and now this.
Apple did you blow it?
Dead in the water.

Further measures described here:
https://discussions.apple.com/docs/DOC-6562
This fixed the issue.
Per instructions, had to completely remove iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Application Support. (and others if you have them, read that list carefully).
What a pain.

Similar Messages

TS5376 Repairing for MSVCR80.dll missing -- what about the library?

Repairing for MSVCR80.dll missing. When performing these steps, will your library of music, etc. be lost? If yes, what is easiest way to restore?

See Troubleshooting issues with iTunes for Windows updates for further advice.
tt2

ITunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Attempted update to iTunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.

Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.

When trying to download the latest version of iTunes, I got 2 errors: MSVCR80.dll missing and then Error 7 (Windows error 126) HELP!

When trying to downlead the latest version of iTunes, I got 2 errors:
1. MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem.
Service "Apple Mobile Device" failed to start. Verify your admin ......
2. iTunes was not installed correctly. Error 7 (Windows error 126)
Please help!

Do you have Windows XP Pro?
see https://discussions.apple.com/thread/5840089?tstart=0
there is a stupid checkbox you must uncheck, saying "protect my computer and data from unauthorized program activity"
You see this screen when you right-click on the ItunesSetup.exe in your Downloads folder.
downloads>ItunesSetup.exe (right-click)>yourself as admin & UNCHECK THAT BOX!> conntinue with new installation and even find your old playlists still intact!!
This is apparently a Windows XP fix alone. MSVCR80.dll is (probably) reinstalled by Itunes under a partnership aggreement with Microsoft.
Using the Microsoft "Fix It" utility at http://support.microsoft.com/mats/program_install_and_uninstall/en does NOT fix anything. Abandon All Hope Ye Who Run This Utility More Than Once

I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll Then I get ERROR 7 (windows error 126) I tried reinstalling iTunes but that did not help. Please Help Me!

I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes Error 7 (Windows error 126) Please Help me!

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99623)

TS3297 I keep getting an error when trying to add songs to the iCloud. Error reads: "We could not complete your iTunes_Store request. An unknown error occurred (4002)" I have tried to completely delete iTunes and reinstall but still getting error.

I keep trying to download songs to ICloud but keep getting an error: "We could not complete your itunes_store request. An unknown error occurred(4002)"
I have deleted itunes and reinstalled but continue to get error. Want else can I do?

Thanks jdnjo. Your fix also worked in Windows 8!

I am trying to reinstall safari for windows 7 and I get "error code 2203" and the install will stop there, any solutions.

I am trying to reinstall Safari on a windows 7 pc and I get an"error code 2203" messege and it won't complete the install. Please help because I like using Safari more than windows.

You are better off using either IE or Chrome ...
Apple apparently kills Windows PC support in Safari 6.0

Trying to refresh schema for BHOLD management agent. Getting error

Greetings,
I'm piloting the BHOLD suite to see if it will meet our company's needs.
I added some attributes in the BHOLD core configuration pages (web site).
Now in the FIM sync service, I need to refresh the schema to see them. The Schema refresh fails with the following error logged in the event log. Any ideas?
-Doug
Log Name:      Application
Source:        FIMSynchronizationService
Date:          1/15/2014 8:42:27 AM
Event ID:      6801
Task Category: Server
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      xxxxx
Description:
The extensible extension returned an unsupported error.
The stack trace is:
"System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'WindowsIdentityImpersonationFactory'.
   at Microsoft.AccessManagement.BHOLDConnector.Context.WindowsIdentityImpersonationFactory.CreateImpersonation()
   at Microsoft.AccessManagement.BHOLDConnector.DataAccess.IntegratedSecurityDataAccess..ctor(String serverName, String databaseName, String username, String password, String domain)
   at Microsoft.AccessManagement.BHOLDConnector.BHOLDConnector.GetDataAccess(KeyedCollection`2 configParameters)
   at Microsoft.AccessManagement.BHOLDConnector.BHOLDConnector.GetSchema(KeyedCollection`2 configParameters)
Forefront Identity Manager 4.1.3114.0"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="FIMSynchronizationService" />
    <EventID Qualifiers="49152">6801</EventID>
    <Level>2</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-15T14:42:27.000000000Z" />
    <EventRecordID>110324</EventRecordID>
    <Channel>Application</Channel>
    <Computer>xxxxx</Computer>
    <Security />
</System>
<EventData>
    <Data>System.ObjectDisposedException: Cannot access a disposed object.
Object name: 'WindowsIdentityImpersonationFactory'.
   at Microsoft.AccessManagement.BHOLDConnector.Context.WindowsIdentityImpersonationFactory.CreateImpersonation()
   at Microsoft.AccessManagement.BHOLDConnector.DataAccess.IntegratedSecurityDataAccess..ctor(String serverName, String databaseName, String username, String password, String domain)
   at Microsoft.AccessManagement.BHOLDConnector.BHOLDConnector.GetDataAccess(KeyedCollection`2 configParameters)
   at Microsoft.AccessManagement.BHOLDConnector.BHOLDConnector.GetSchema(KeyedCollection`2 configParameters)
Forefront Identity Manager 4.1.3114.0</Data>
</EventData>
</Event>

This version of the sync engine has a known issue with ECMAs when attempting to refresh the schema. The following KB article, for build 4.1.3441 of FIM 2010 R2, describes this issue. I believe it is synchronization service issue 7.
http://support.microsoft.com/kb/2832389/en-us
The builds of FIM R2 are cumulative. This is actually the latest version, build 4.1.3496. This version includes all of the fixes from previous hotfixes, including the above.
http://support.microsoft.com/kb/2906832
I had this same problem and after installing the 4.1.3441, the schema refresh on the BHOLD MA worked as expected.
P.S.
Also, I wouldn't populate all of the attributes on export. Several of these should have been hidden but weren't. If you populate bholdLastname or bholdFirstname, it can overwrite the value for bholdDescription, which is an important attribute. Also, by default,
there are no attribute in BHOLD that these two actually sync up with.....................

TS3212 Error message: File MSVCR80.dll missing

I rencently got this error message when trying to start itunes: Dile MSVCR80.dll missing. I uninstalled itunes and reinstalled and got the same error message. I had tried to load the new update when this occured. Im am on a Dell, windows 7.
Anyone have any idea what the problem is?
Thanks

Click here and follow the instructions.
(99056)

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

This also work100%
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

HT1923 Hi I have tried in upgrade to latest Itunes version but I keep getting MSVCR80.dll missing notification whats all this about?/ & how do I overcome it

I have tried installing new version of itunes on my pc (windows 7 64 bit) but I keep getting an message saying MSVCR80.dll missing. Can amyone tell me how to resolve this please?

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

• Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

Re: "MSVCR80.dll Missing" Thanks to mspanner and others for you help. Followed your advice, which worked.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

HT1222 Tried to download latest version of itunes. came up with error MSVCR80.dll missing. Tried uninstall and re install. won't work

Tried to download latest i tunes version. After install, I can't bring the program up. Keeps telling me MSVCR80.dll missing. Un installed and then re installed but same message.
Got it done. Uninstalled all apple programs. Did a complete defrag. Downloaded itunes and went to completion.
Go to HTTP://support.apple.com/kb/HT1923 for procedure

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Tried the itunes update and it did not download properly. Now I get an error 7 message and also a msvcr80.dll missing message. help?

I tried to download the last itunes update 1/22/14 and it did not download correctly. I can't access itunes at all. Tried to uninstall and download from website but I get error 7 (Windows 126) message and also msvcr80.dll is missing from your computer message.
any ideas?

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

TS5376 Tried Apple's fix for MSVCR80.dll missing, still getting error

Similar Messages

Maybe you are looking for