TSAM transaction monitoring

Hi,
I enabled tsam transaction monitoring from 'bankapp' application at tmadmin as follows:
chmo -m SITE1 tran:tranratio=1:Now I accessed the 'bankapp' client using the following command.
driver -n1000
Now I go to TSAM console and click on TSAM -> Transaction -> Query -> Query for later 100 transactions -> Submit.
The result is:
INFO: nothing found.
Is there anything extra to be done for getting these transaction monitoring logs?
Is TSAM console only way to view transaction monitoring logs?
Does TSAM agent store transaction monitoring logs somewhere in the server?
Does TSAM give transaction monitoring inforamation only for currently running transactions or does it provide data for historical transactions also?
I will be grateful if you could provide me answers for these.
Ravi

Hi Ravi,
Sorry for the delay in answering but as you can probably imagine things are a little busy as a result of the Oracle acquisition.
I'm not sure why you aren't seeing any transaction entries in TSAM console. Are you able to monitor other categories and see them show up in the console?
The TSAM console is currently the only way to view any performance data collected by TSAM.
The TSAM Agent does not "store" any logs of any sort, but there may be a lag in the reporting of the data if the LMS or TSAM Manager get behind. The raw records in TSAM 1.1 are buffered just like any other Tuxedo request so if the LMS can't send the data fast enough to the TSAM Manager, then logging requests may queue up in the LMS's request queue.
TSAM provides both current transaction monitoring and historical transaction reports.
Regards,
Todd Little
Oracle Tuxedo Architect

Similar Messages

  • SCOM2012 Web Transaction Monitor - Displaying the Request Status

    I have successfully created a 'Web Application Transaction Monitor' using the SCOM 2012 R2 Console wizard.  The monitor goes through several listed website URLs and completes.
    What I'm interested in is how to display the 'Request' status objects.  I use the MS-Visio plug-in to display various dashboards within Sharepoint and I would like to display the part of the Web Transaction which is showing an error.
    I can see the individual requests under the Availability of the created 'Web Application Transaction Monitor'.  I just need to capture those objects for displaying within a view or MS-Visio diagrams.
    The email notifications show which of the URLs are having the issue, but I do not seem to find a view or object I can display.
    Any ideas on what could be done would be appreciated.  I was hoping NOT to create individual Web Txn Monitors for each URL, but that maybe the only solution.

    When I create a Dashboard View and add the Alert Widget, I can get the URL from Name Column.
    Juke Chou
    TechNet Community Support

  • Transaction Monitor u2013 Services Processes into BI

    Hello Experts,
    I'm wondering if it is possible to get tickets information from Solution Manager and have some statistics in BI.
    For instance the average time of ticket resolution, number of tickets per team/person/month, etc, etc
    At this moment Iu2019m using the ZNTP transaction in solution manager to access Transaction Monitor u2013 Services Processes.
    I would like to install BI Content to have some summary queries about the activity within ZNTP.
    I already connected BI to SMP and also replicated metadata, however the data sources available just by the name donu2019t help me much.
    Perhaps I should check the content version within solution manager and BI but I don't know how to performe such verifications.
    Thanks

    using rsa3 in the source system I'm getting the follow error:
    The extraction program does not support object 0CRM_SRV_PROCESS_H
    Message no. R3009
    Diagnosis
    The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0CRM_SRV_PROCESS_H.
    System Response
    The data extraction is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    Can you help me?

  • Web Application Transaction Monitoring Alerts with "wrong" Path

    Hello,
    i have created some web transaction monitors, such as
    http://foo.htm who is  hosted on the server foo123.cologne.org.
    It works.. but
    we have also a mssql monitoring, the discovery of the mssql management pack discovers the reporting part of mssql server on our managementserver Operations12.cologne.org. So (it's right..) the server Operations12.cologne.org is a member of the SQL Instances;SQL
    Compontents;SQL Computers group.
    When the web transaction monitor generates an alert, it have the pathname Operations12.cologne.org and not the pathname of the "right" server foo123.cologne.org.
    For our mssql admins i have build an email-notification, when somethings going wrong at our sql servers (member of the SQL Instances;SQL Compontents;SQL Computers group) they received a mail.
    The problem is, that they received a mail, when a web transaction monitor generated one, because the pathname is the name of our management server, because the management server is a member of thos sql server groups.
    Someone have an idea to fix my "problem"?
    - Best way: changing the path names of the web transaction monitorings... but how? i can't find anything to change..
    Kind regards
    Wolfgang Winter

    Thank you, it's a help to decide, what to do, so i have to solutions:
    - installing an agent to the web-appliction-hosting-server and configure it as a watcher node
       (may be i will have problems with our firewall admins, because they have to allow the communications and.. when the hosting watcher is down, i have no alerts.. when i use more than one watcher nodes (good).. i have the wrong path names..
    - configure a part of our management server group without  SQL-Reporter Component as a watcher node
       (more easy, because i have to tell my firewall admins: "the server foo456 is the standard watcher node"
    Crazy.. because i don't know, how to assign the web transaction monitors to the "causing" server.., for mail notification and for our integration to HP Service Desk...

  • Transaction Monitor - Org Unit (Service) and Service Organization

    When using Transaction Monitor I notice that there are two available filters:
    Org Unit (Service) and Service Organization
    When I try and use these filters only some of the Org Units I have created using PPOMA_CRM ae visible and most of the other org units are not.
    How do I make all the other Org Units I have created visible to this filter option?
    Thanks
    Simon

    Hi Naveen,
    We assign these Org Units on the support ticket in the support team field when creating the ticket. Do I need to make any further configuration as all the support teams I have entered on the tickets do not appear as a selectable option when using the Org Unit (Service) or Service Organization filters in Transaction Monitor.
    I am sure there is somethign I am missing.
    Thanks for your assistance.
    Simon

  • OSS messages in Transaction Monitor

    Hey all,
    I saw at the Solution Manager Seminar that it is possible to bring OSS messgaes created in the Service Market place into the Transaction Monitor in Solution Manager. Anyone know the config or background job for this?
    regards,
    Jason

    Thanks Raquel,
    I read through note 781163.
    https://service.sap.com/sap/support/notes/781163
    Which variant do you recommend?
    'All systems' or
    'X all systems (without SAPNet R/3 Front End)', or
    'W Workplace'?
    regards,
    Jason

  • CRM_DNO_MONITOR - Transaction Monitor -reg

    Hi,
    We are using solution manager for SAP support, whenever we receive a issue from the clinet we logg a call in the transaction 'CRM_DNO_MONITOR - Transaction Monitor' this is like notification in QM and CS modules.  After giving the solution we changes the statuses like inprocess, soltion proposed, confirmed. Once we logg a call system generates a numaric unique number, now my client wants this number wise status. Which transaction is having what status like inprocess, soltion proposed, confirmed ?
    I am not able to find tables where the system is storing data for this transactions. Please help me in this regard.
    thanks in advance.
    rajendra

    Hi Rajendra,
    What do you mean by " system wise status "
    If you use the selection criteria for crm_dno_monitor then you can get the tickets as ur required..
    for e.g if u select status as In Process then you will get all the tickets in in process status ...moreover its ALV output so you can use the filter feature to provide more filteration based upon the requirement like sorting etc.
    As far as building the zreport its bit difficult but hint is to before pressing execute button in Crm_dno_monitor switch on trace in
    "ST05"
    Hope it helps.
    regards
    Prakhar

  • Have Web App/Transaction monitoring alert only when majority of watcher nodes are in error?

    We do a lot of web app/transaction monitoring and we have watcher nodes distributed globally. When we have connectivity issues at a site hosting a watcher node, the web monitors that target the watcher node in that site all alert even though all the other
    watcher nodes are fine.
    We'd like to reduce the noise from our web monitoring by having alerts fire only when a majority, or some other defined ratio, of watcher nodes are in an error condition. Is this possible, and if so, how?
    For reference, we're running 2012 R2 and monitor hundreds of URLs. This list of URLs and watcher nodes is fairly dynamic, so we'd prefer to find a solution that doesn't require manual development (e.g. creating distributed apps), however if that's the only
    path then it would also be good to know.

    First, disable the alerts from the web application that you have created.
    Next, create a new distributed application.  Use the 'Blank (Advanced)' template.  When it comes to choosing the management pack, set it to be the same as the one used for the web monitor.
    Once the distributed application designer has loaded, client the 'Add Component' button.
    Give it a name - Something like 'Appname web monitor component group'
    Choose the 'objects of the following type(s)' radio button.  Navigate the tree:
    Entity -> Logical Entity -> Perspective -> Web Application Perspective -> YOURWEBMONITOR
    Tick the box next to the name of your web monitor.
    Now, on the left, in the Objects bar, you should see the watcher nodes for your web application.  Add ALL the watcher nodes into the component group by dragging them in.
    Now save your distributed application.
    Click the title of the component group that you have just created, down the bottom right of the window there will be a link called 'Configure Health Rollup'.  Click that.
    In the override properties window, Tick the box next to the 'Rollup Algorithm' and change the Override Value to Worst state of a percentage of members in good health state' and override 'percentage' value into your expected value.
    OK the changes and then save the distributed application once again.
    Before you exit the designer, note the name of the component group that you created.
    Finally, we have to enable alerting for that component group.  To do this, exit the designer and you should be back in the Authoring pane of the console.
    Go to "Management Pack Objects\Monitors" in the console.  Click on the Scope toolbar button to  scope the view -
    if a scope was previously active, this will disable the scoped view, so click the button again.  You should be presented with a "Scope Management Pack Objects Window"
    Click the "Clear All" button at the bottom of that window, then type in the
    name of the component group that you noted down earlier into the search box.  A single line should be displayed in the search results.  Tick the box and click OK.
    There should now be a yellow bar saying that the view has been scoped to your web application component group.  Underneath will be a tree view of the monitors in your web applicaion.
    Expand the tree view until you find a monitor called "Component Group Health Roll-up for type..."
    Open the properties of that item, go to the alerting tab and
    enable the "generate alerts for this monitor" checkbox.
    You can then fill in the alert name and description as well as other things like severity and whether or not the alert will close when the monitor is healthy.
    Roger

  • Can't record web session in Web Application Transaction Monitoring using IE10 (Tried under Windows Server 2008R2 and 2012)

    Hi,
    In Operations Manager Console 2012 SP1 including RU2 I am trying to record a web session in Web Application Transaction Monitoring.
    I have check that:
    The add-on (Microsoft Web Recorder Helper) 64bit is Enabled.
    The 64bit version of IE10 is running/launched. See this link for how to modify your registry key if needed:  http://kevingreeneitblog.blogspot.co.uk/2012/01/scom-2012-recording-web-browser-session.html
    I have tried both on a Windows 2008R2 and 2012 server, but the recorder is not showing up as can been seen from Kevin's Blog (link above).
    Any Ideas?

    I managed to get this working on both Windows 8 IE10 and server 2012 IE10. Tested on SCOM 2012 SP1 UR2 and UR3. I've done this process in lab and production several times so hopefully this helps you out.
    Checklist:
    1. Ensure that the 64bit IE10 is launching when the "start web-capture" is started in SCOM.
    2. Enable IE10 internet options:
    a: Advanced - Security - Enable Enhanced Protected Mode
    b: Advanced - Browsing - Enable third-party browser extensions
    3. Close all running IE sessions and open the Registry Editor
    4. Registry Change (No reboot needed)
    - Browse to the following regkey:
    HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
    - Add a new DWORD called TabProcGrowth and set it to 0
    5. Registry Change (No reboot needed)
    - Browse to the following regkey:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Discardable\PostSetup\Component Categories64\
    -You should see two subkeys labeled: (These are the cached BHO IE objects related to the Web Recorder)
    {00021493-0000-0000-C000-000000000046}
    {00021494-0000-0000-C000-000000000046}
    - Delete only the above two mentioned keys (This will force IE to recache them next launch)
    6. Try to start the web capture again from SCOM 2012 SP1.
    7. When IE10 Launches enable the add-on again if you are prompted.
    8. If you still don't see the Web-Recorder pane in IE you can now show it by:
     - View - Explorer bars - Web Recorder

  • Java Application Performance Monitoring - J2EE Transaction Monitoring

    Hi,
    Does SCOM 2012 R2 support J2EE transaction monitoring, ie how application behaves from end users. Apdex scores,response time and throughput , Execution method and SQL queries.I could not find transaction monitoring information in Java MP guide.
    Is that Java managment pack supports monitoring only Tomcat and not weblogic,websphere and jboss on Linux servers,
    Appreciate help in this
    Thanks in advance
    Bharath

    Hi Bharath,
    "Apdex scores,response time and throughput , Execution method and SQL queries."
    You're talking about the metrics similar to those which we have after configuring application monitoring in .NET Application Performance Monitoring (AVIcode APM) template, right? If so, this sort of APM profiling for Java apps introduced in SCOM 2012
    R2. But it's only for Tomcat5.5+ hosted Web Applications:
    http://blogs.technet.com/b/random_happy_dev_thoughts/archive/2014/01/07/system-center-2012-management-pack-for-java-application-performance-monitoring-released.aspx
    If you use another application server rather than Tomcat (WebLogic, WebSphere, JBoss), I would recommend you to take a look at BeanSpy instrumentation itself:
    http://www.systemcentercentral.com/demystifying-jee-app-performance-monitoring-in-opsmgr-2012-jee-faqs/
    Download link:
    http://www.microsoft.com/en-us/download/details.aspx?id=29270
    This is not AVIcode-like APM (AVIcode-like APM relies on it as a prerequisite), but if you are familiar with MBeans structure, you could configure quite interesting monitoring transactions for your java apps:
    http://blogs.inframon.com/post/2012/04/27/WebSphere-monitoring-with-the-JEE-Application-Performance-Monitoring-management-packs.aspx
    http://stefanroth.net/2012/04/10/scom-2012-jee-application-availability-monitor-template/
    Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

  • SCOM 2012 SP1 Web Transaction Monitoring with Login test.

    Hi, 
    we setup a web transaction monitor test and did the full recording.  The web site is one that accepts an active directory account for login.  We also setup a runas account that is a valid account for the site and configured NTLM in the settings
    for authetication and set this runas account.
    The test does not fail.    However when we change the runas account password to force a failure, we dont get a failure on the website login test but instead a runas account verfication failure from SCOM.
    How can we configure the web transaction monitor to properly login during the test?   Any guidance would be appreciated.
    Thanks Lance

    So back to the original topic of the thread.
    We setup another test on a site that uses basic authentication.  We setup the web transaction test to use a  login on a initial site that transfers to a second site.  We recorded this entire test and saved.  It seems to work as it gives
    no errors.
    However when we change the Runas account's credentials, which means it CANT login to the site, it still runs fine with no errors.  
    This tells me it is not really logging in but just seeing the http status code is less than 400.
    What am I doing wrong.
    Thanks Lance

  • Synthetic Transaction Monitoring

    I would like to know if System Center 2012 can support Synthetic Transaction monitoring. what i need is that the SC 2012 will have to capture the synthetic transactions being generated by the third party generator. These transactions captured by SC 2012,
    will have to provide transaction breakdown time between Web, App and DB layer’s and give over all End User experience.
    Can any one suggest how SC 2012 will handle such requests? how to set it up? what KPI will SC 2012 do today for synthetic transaction monitoring.
    please email me the response to [email protected] or [email protected]
    Michael Martin

    Hi Michael,
    I don't think it is a big deal. Web Application Transaction Monitoring is performed by sending HTTP requests to your application from specified Watcher Node (Management Server itself, SCOM Agent or GSM points worldwide using appropriate subscription
    http://stefanroth.net/2014/01/06/scom-global-service-monitor-using-visual-studio-web-test/). Just check out that your app is available and responds well to those HTTP requests, for sure it's better to record Web Application Transaction tests on
    Watcher node explicitly.
    Igor Savchenko, VIAcode Consulting LLC (http://www.viacode.com/)

  • Filtering Transaction Monitor using country location

    Is there a way that Transaction Monitor can filter for SLFN support tickets based on the country of origin of the Business Partner record in the 'Reported By' field?
    Thanks
    Simon

    Thanks for the replies - this is helpful when filtering by country code using T-CODE BP.
    However I am using the transcation monitor (CRM_DNO_MONITOR).
    We are using Service Desk as a global help desk tool with multiple countries submitting tickets. However I cannot find a way to use transaction monitor to filter on the ticket received from one particular country - its seems that it is all or nothing.
    I can add each individual business partner record from the required country and set it as a user variarnt, but this would be very time consuming and tedious as some of our sites that have many users and therefore many BP records.
    Is there a way in transaction monitor I can see tickets just for a particular country.
    I hope this makes sense - but please let me know if I need to clarify anything.
    Thanks
    Simon

  • Synthetic Transactions Monitoring - Query

    Hi,
    Couple of things I would like to clarify related to Synthetic Transactions as I'm unable to find it clearly:
    1) In SCOM, are Synthetic transactions executed parallel or sequentially? I could not find anything officially written on that? Lets say if I've 10 transactions to be monitored per watcher node, will it be executed one by one until one is completed or all
    10 will be executed at the same time. How to identify?
    2) A transaction with multi steps, will it be counted as one transaction or every step under that is treated as separate transaction?
    3) Considering the point number 2 how many transactions are supported per watcher node
    3) In the pre-req guidelines it is mentioned 50 URL's monitoring supported per agent. Is it just from URL availability point of view or anything else being said here?
    Thanks,

    Can anybody share views on this please?

  • Monitoring using Business Transaction Monitoring

    Hi,
    I have deployed BTM for Demo purpose. Its an EAR files.
    How do I start monitoring my services.
    I also deployed SOA composite. But the services are not getting monitored.
    Do I need to install any observer for the demo version too?
    Any pointers would be appreciated.
    Thanks
    Shashank

    For the purpose of demo, I downloaded BTMJavaDemo_11.1.0.5.zip from http://www.oracle.com/technetwork/oem/downloads/btw-downloads-207704.html

Maybe you are looking for