Tsatest error backing up eDir on OES11

Trying out some new backup software and see some issues accessing eDir details when configuring a backup job.
In order to troubleshoot, ran tsatest -v NDS on the OES11 server.
This only runs if change tsamode to NetWare in tsafs.conf.
Used a LUM enabled admin equivalent account to run tsatest.
When run tsatest -v NDS on the server, it displays an error message in Terminal, but completes a full backup of eDir regardless.
A saved error log of this process shows no errors.
The tsatest -v NDS on screen error is
"Unable to retrieve extended resource information: 0xfffefffb
FFFFFFFC - Directory Name Space S1=., S2=., Rev=1"
Does anyone know what this means?
Is it important?
Thanks,
Chris

frickc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

Getting error back to XI for Asyn Proxy scenario

Hi All,
I am working on proxy scenario. i am using fault message type for rising exception and scenario is asynchronous. if ther is any application is throwing some exception, now it is not coming to xi. we can monitor it in R3. but i need to rise alert if ther is any application error. is ther any way to get the error back to XI for async proxy scenario...?
Please help me
Regard
Pradeep P N

Hi
I will explain my scenario, suppose the message from xi reaches R3 succefully, but due to some back end configuration the data is not getting updated(eg for creating sale order ther should be some back end configuration), in that case the proxy will raise exception and message will get failed in R3, i can monitor that in SXI_MONITOR in R3 as failed. but for XI it is success, When ever a message is getting failed in R3, i need to rise one exception.
In XI sxi_monitor i can see it as success, but in message monitoring while monitoring Proxy Bussiness system i can show the status as Apllication error, if iam aable to get this proxy business system in Alert configuration then i think we can rise alert. is ther any way to get proxy business system with Adapter engine and Integration engine. Please help me....
Regards
Pradeep P N

ERROR Backing Up Curve 8330

WHen i attempt to backup my device its gets about 98% done then hangs for a few seconds and returns with the following error :
Error backing up database(s).
[Browser Data Cache] 0 or 3 entries received
ive cleared the browser cache and reboted the device but i still get the same error , This just started happening today i never encountered ANY erros proir to this, can someone help me out here i only had this BB for 4 days so im a real Newb
I WAS ABLE TO SOLVE THIS PROBLEM
By using desktop manager and Deleteing the Cace Manually
however i did not know how to delete this post after i sent it..
Message Edited by bantam on 07-26-2009 03:36 PM

Welcome to the forums
See this KB for more info: http://www.blackberry.com/btsc/KB16280
Cheers,
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Error Backing Up 8330

Hello all, say Hi to the new guy
I have been reading a lot of these posts and appreciate this nice community.
I like my 8330 and it likes me. When I back up I receive a message "Error Backing Up Data Base"
{Profile} 4 of 6 entries retrieved.
Can someone tell me what I can do to correct this? Or do I even have to?
I am running 5.0.0.11 on my Desktop.
BB platform is v4.5.0.138
I do appreciate any and all help, because I am beyound it.
Don
Solved!
Go to Solution.

Welcome to the forums
See this KB for more info: http://www.blackberry.com/btsc/KB16280
Cheers,
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Sending Request Mapping errors back to a consumer for a sync scenario

Hello Experts,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
I also want to communicated back to the consumer, if there are any connection failures between PI and CRM.
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Your suggestions are highly appreciated.
Warm Regards,
Anshul

Hello,
I have a sync scenario (JAVA Application <-> PI <-> CRM (service)) where i want to send back any mapping exception that occurs in PI on the request side of the call, back to the consumer.
You can use the XI alerting framework for that, here are some references:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
XI: Alerts - Step by step (Step-by-Step blog by Michal)
I have implemented Fault Mapping in my scenario. Will this take care of any connection failures between PI and CRM also?
Fault Mapping is for application errors only, it will not handle system errors.
Hope this helps,
Mark

How to send reciever side errors back to sender

Hi Experts,
i am doing PROXY to JDBC syncronous scenario, my requirement is if any errors in reciever side i need to send those erros back to R3 system. errors like if any autorization problem, coneection problem, query time out.
can anyone suggest me how to achieve this.
Kind Regards,
Praveen.

Hi Praveen,
In my case, the error exception usually is done by BPM exception branch. You must to use BPM for your process and send SYSTAT or ALEAUD idocs types. I recommend you the use of SYSTAT idoc because is more openness than ALEAUD idoc type.
SAP should to improve this funcionality with new versions of SAP PI because if you want a good exception handling the best option is the use of BPM and the performance of BPM is lower than simple business scenario.
Best regards.
Ivá

Error backing up a catalog: "low on disc space"

I have problem backing up my catalog in Photoshop Elements 11. I have a new computer and want to move my Potoshop catalog to this one. But when trying to back up on the existing PC, it first says «Please wait while Elements Organizer prepares for backup...». Then after a while I get the following error message: «Your system is low on disc space, and Elements Organizer cannot perform this operation. Try removing some files to free up disk space.»
In trying to back up to a directory on a USB-drive with 847 GB free space. Photoshop says that it will back up «Size: 143 041,10 MB» so there should be plenty of free space. I have no problem copying files to this drive so it is accessible.
Photoshop is installed on the C-drive (18,4 GB free), while my picture files are stored either on C:, on E: (46,6 GB free) or on I: (1,76 GB free).
Any suggestion for how to solve this?
Info regarding my system from Photoshop «System Info» in «Help»:
Elements Organizer 11.0.0.0
Core Version: 11.0 (20120830.r.32025)
Language Version: 11.0 (20120830.r.32025)
Current Catalog:
Catalog Name: Arild PE v6
Catalog Location: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\Arild PE v6\
Catalog Size: 71,5MB
Catalog Cache Size: 945,9MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: Intel CPU Family:6 Model:15 Stepping:6 with MMX, SSE Integer, SSE FP
Built-in Memory: 3,5GB
Free Memory: 2,3GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.70
Adobe Reader Version: 11.0
Adobe Acrobat Version: Not installed

Hi
I'm getting this same issue/ Also Elements 11. Backup was fine a month ago. Just wondering if you found a way to solve this.
I can do an incremental backup just fine but I want to do a full backup, Trying to get this to work to migrate to new laptop in a week or two's time.
I've tried all tips ago, incl re-indexing (which has helped organizer performance significantly)
My Catalog size to be backed up is 418GB (some of my catalog is on C: drive, but most of my videos in the catalog are stored on H: drive)
I have 865GB free on H: dirve, my target disk
I have 93GB of 451GB free on C: drive
System info below.
Many thanks for any advice
Stephen
Elements Organizer 11.0.0.0
Core Version: 11.0 (20120830.r.32025)
Language Version: 11.0 (20120830.r.32025)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 124.4MB
Catalog Cache Size: 3.6GB
System:
Operating System Name: Windows 7
Operating System Version: 6.1 Service Pack 1
System Architecture: Intel CPU Family:6 Model:14 Stepping:5 with MMX, SSE Integer, SSE FP
Built-in Memory: 3.9GB
Free Memory: 917.8MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.75
Adobe Reader Version: 10.1
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (HL-DT-ST DVD+-RW BUS: 2 ID: 2 Firmware: GA31N)

Lumia 1320 Windows 8.1 - Error backing up the settings :(

Already tried turning the phone off and on and deleting the previous back up file (which was from 2 months ago) but still the same. I recieve and error saying "There was a problem backing up your settings. Try again Later". Well already tried
10 plus times but still was with error. Please help

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion'
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Displaying report error back to calling form

Hi
We are running 10g reports and forms on Red Hat.
The forms are run using a run_report_object command to generate pdf output and then displayed using web.show_document. The parameters are entered into a form and sometimes are validated and sometimes not.
On the whole it all works well. However, if a bad parameter is passed to a report, the report will not run and an error will be held in the report server for that report. Is there an easy way to programmatically detect in forms, that the report has errored and then to bring that error message back and display it in the form?
TIA
Thanks
Tony

Sorry
i found a way.
if <my item is changed> then
set_block_property(BLOCK,default_where,'initial where conditions + current displayed row conditions');
Clear_Block (No_Validate);
execute_query;
set_block_property(BLOCK,default_where,'initial where conditions');
end if;

Error backing up with mailbfr

Hello,
I am trying to backup my mail server using the mailbfr script and I am getting the following error:
link_stat "/private/etc/amavisd.conf" failed: No such file or directory
rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-14/rsync/main.c(633)
speed 9600 baud;
iflags: echoe echoke echotcl pendin
oflags: -oxtabs
cflags: cs8 -parenb
mailbfr was aborted. the process was NOT completed successfully.
I am running Mac OS X 10.3.9 and have mailbfr v0.4.6
I need to know what I'm doing wrong so that I can get my mail backed up. Thanks for your help.
PowerMac G4 Mac OS X (10.3.9)

With any luck Pterobyte will notice your question.
Mailbfr is not an Apple product, it was authored by Alex (aka "Pterobyte") and Dale Walsh.
You must have downloaded the software from their site,
http://osx.topicdesk.com/
which is probably the first place you should pose any questions about it
I have used it successfully, and looking at that error message, I'm wondering about the reference to /SourceCache
that is a build directory used and not where the executable should be. How are you invoking mailbfr exactly ? It should have been installed in /usr/sbin
Try calling it directly:
sudo /usr/sbin/mailbfr -youroptions
Also, do you have the/any file /etc/amavisd.conf ?
What result do you get from :
ls -al /etc/amavisd.conf
(or)
tail /private/etc/amavisd.conf

Error backing up after ios5

I upgraded itunes 10.5 and went to upgrade my iPhone to iOS5. I tried to back up manually after not seeing it back up automatically and there was no more option for backup when I control clicked my iPhone (on a powerbook). I assumed it was due to haveing an older iOS, so I upgraded anyway and lost everything and had to set up my preferences from scratch. I have synced successfully but itunes will not backup my iphone. I have tried manually again and it does not show up as an option. I then decided to try at work and noticed the option on my PC at work, but I did not backup yet. I then came home to try and reinstall itunes sense it seems that is the problem, but that did not work.
Also, I tried add a password on the summary page of my iphone, to try and force it to back up but I recieved an unknown error that does not google 0x4685D275
I'm very fustrated as this makes no sense, any help would be very appreciated. System specs below.
Macbook pro, OSX Lion, 4 gig RAM, iTunes 10.5, iPhone 4 iOS5. Very tech savy.
Thanks,
Emmanuel

Well, after digging into the Discussions some more I found Jeff Holland's reply to someone and did both the 3.2.1 updater and then the 3.3b3. They fixed the problem and now I get error-free backups again. Jeff was also kind enough to respond to me from Propaganda Productions with the update site.
I really dislike the changes in the Discussions format. I can never find info as quickly as I did for years before; I'm still trying to figure out how to navigate this site!

Error backing up- previously worked...

Hi,
My time machine is failing back up so i installed the widget and its giving error:
event store uuids dont match for the volume: Macintosh HD
node requires deep traversal:/
reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable
any help to resolve this please?
thanks.

padraig galvin wrote:
Hi,
My time machine is failing back up so i installed the widget and its giving error:
event store uuids dont match for the volume: Macintosh HD
node requires deep traversal:/
reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable
That's not an error. Those messages are normal under some circumstances, and mean that Time Machine must compare everything on your system to the backups, to figure out what's changed and needs to be backed-up. See #A6 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for details.
You've posted in the Snow Leopard forum, but your signature says you're running Leopard. If you're on 10.6.4 or later, you should see "Scanning xxxx items" on the +Time Machine Preferences+ window.
The "deep traversal" will take a while, depending on how much is on your system. But it shouldn't take hours, even on the largest systems. If it does, cancel the backup (if it won't cancel after a while, see #D6 in Troubleshooting).
Then verify your internal HD, and Repair your backups, per #A5 there.

"error backing up ipod (-43)"

I have a 4th generation ipod. with the new itunes version, i try and get the update for iSO 5 but it wont work when it first 'backs up' my ipod. 1 minute into the backup a message pops up saying there is an error (-43) and gives me an option to continute but it says it will erase all content on my ipod. what do i do!?!? pleasee help me

See the actions for that error number here:
http://support.apple.com/kb/TS3297
Also maybe here:
Backup error (-5000): Apple Support Communities
srl7575 wrote:
Now it's saying (-5000)

Error backing up -5000

I am FINALLY updating my IPod Touch from 3.1.3. I have almost 1200 songs on it. I have been leary to upgrade because I don't want to lose my music. Today I had to the heart to ATTEMPT upgrading but then received an error message about backing up my data with error code -5000. I am using ITunes 11. I have already gone to Summary and selected Back Up Now. I went into preferences and confirmed the back up date of today. I even Synced it again just to be on the safe side.
What is this error and how do I finally update my ITouch without losing all my music??????

iOS: Troubleshooting backup issues in iTunes
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
This one says solved
Re: iOS5 update: Error occurred while backing up -5000
The iPod backup that iTunes makes does not inclued any synced media like apps and music.
Follow these instructions if all the synced media is not in your iTunes library.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Before you restore/update the iPod make sure that your iTunes library has the version of apps that are presently installed on your iPod. Many apps have been updated and the update apps are not compatible with the 1G iPod. I would do that by deleting the apps from your iTunes library and then transfer them to your iTunes library. See:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

Remote control error 1891 after eDir upgrade?

- NW6sp3 two-node cluster (production server) houses read/write replica
- NW6sp3 utility server houses master replica and is a ZenWorks 4IR5 server
- The above servers reside in a small chunk of a much larger NDS tree
- Roughly 150 users with the 4.90sp2 client + Zen4IR5 agent
- ConsoleOne 1.3.6c with current Zen and Cluster snapins
Is there a known preferred method (or recommended method) of authenticating
to either read/write or master replica's? Here is my issue:
Prior to upgrading all three servers above to eDir 8.7.3.3, I was able to
use Zen to remote control my users's PC's. I WAS logging into the cluster
(read/write replica), just like all my users still do today. I began seeing
the remote control error "1891" which various TID's describe as an issue
with close proximity to a pure IPX server, and remote control fails. I have
no IPX running in my network currently. Opened tickets with Novell in both
their Zen and eDir teams.....no solution's yet. As I began banging around,
I found that if I force my login to the utility server (master repica in
this case) I now regain remote control ability to my users that authenticate
to the cluster (read/write). Also, if I intentionally login to a different
context of our tree (have a different admin create a temp account for me in
his context, say) first and not into my own context, I can remote control my
users in my context via ConsoleOne. Similarly, if I login to a different
context upon startup, then once the Windows desktop is loaded and I right
click the red N in my system tray, and login as myself into my own context,
I can remote control users. The issue arises when the first context I login
to is my own. Odd I say, odd.
I've done every flavor of dsrepair switches (-xk3, -a, timesync, etc) and
provided logs to Novell. Each dsrepair variant returns zero errors. I
believe the tree is healthy from what I and Novell can tell.
Attached are some logs from about a month ago when I started seeing these
remote control errors. Please note the time stamps on both the remote
controller and remote controlled machines.
I've posted this over on the eDir board as well since it feels like an
authentication issue to me....
Thanks for taking the time to look at this,
Mike
LOG AT CONSOLEONE MACHINE:
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Starting console
#(2884)# 11:45:47 AM 03/14/05 Normal : ZenGetLangValueFromNWLanguage: Trying
to load the resource DLL from Nls\ENGLISH directory
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Resource is loaded
successfully
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Inside LoadandParseCommand
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Connection successful at port 1761
#(2884)# 11:45:47 AM 03/14/05 NORMAL : InitClientInLoop() successful
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Before Authentication
#(2884)# 11:45:47 AM 03/14/05 NORMAL : After Authentication
#(2884)# 11:45:47 AM 03/14/05 CRITICAL : Authentication Failed:
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > Authentication Failed:
returning -1111
#(2884)# 11:45:48 AM 03/14/05 NORMAL : Out of process
LOG AT MACHINE ON FAR END OF REMOTE LINK:
RMErrorLog0.txt
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Workstation Policy -
'EAG-WP:General:Remote Control Policy.EAG.CO.NW.CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: User Policy - ''
#(1484)# 11:45:48 AM 03/14/05 Normal : Only workstation policy settings
active...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Finished reading policies
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Unloaded modules...

Mike,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Tsatest error backing up eDir on OES11

Similar Messages

Maybe you are looking for