TSM Back is stop working

Dear,
I have exchange database and I connected with TSM software, some time TSM software automatilly stop working, for example I have to go start TSM services manually, like TSM storage agent is not started, kindly any advice and solution?
Thanks

Hi,
Please make sure VSS Writers are stable by using the following command.
VSSadmin list writers
The IBMSystem StorageVSS wrtiter must appears when it is installed in the server. Please check if you can see the IBM Writer.
If writers are stable, I recommend you contact IBM support to confirm this issue.
Best regards,
Belinda Ma
TechNet Community Support

Similar Messages

My back button stopped working, so how to fix it?

The back button stopped working. I can still use the keyboard substitute though. I have tried deleting places.sqlite and resetting some of the settings people suggested in config:about. Nothing has worked.

You can try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*C:\Program Files\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Back light stop working

i have a mac book pro serial W872XXXXX91 (Edited by: Host)
i was playing half life 2 and the screen pixels started to break up and the computer crashed. it did that every time i started my mac. i did a hardware test and it said 5.5volts screen error(not the correct words).
i opened the computer and the screen and now the back light stop working, so i am using a lcd monitor to use my computer. what must i do?

Is it still under warranty? Or do you have AppleCare?
Here are Apple contact numbers.
Your MacBook has hardware issues that we are beyond what we can help you with.I don't know if you have Apple stores in your country. If so they probably can repair it. I know under AppleCare, you can ship it in to get repaired. I would assume that would hold true to customer paid repairs also.
DALE

Backing Files Stop Working For No Apparent Reason. Help?

I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
Ryan

I have a portal application accessing a remote WSRP PageFlow portlet. The remote portlet populates a backing file and the producer application reads the data. It was working fine and then it stopped working for no apparent reason. The data was simply null, no errors or warnings. I put traces in the backing file and verified that the life-cycle methods were indeed being called and that data was there, and yes, both were indeed the case. Data is being set on the SimpleStateHolder and it's just not transferring over to the producer side.
In order to rule out environmental issues, I've done this on multiple machines. Also, I started a whole new project, got backing file setup, verified that it worked, started developing with it and one time I deployed and it was broken again. I rolled out the changes I had just made but it didn't matter. The earlier code still failed to work although it had been working moments earlier.
So, any ideas? Has anybody else encountered backing file issues like this and if so do you have any suggestions on debugging or fixing them?
Ryan

Front and back cameras stopped working after IOS 8 update

My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?

Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz

About two weeks ago the brower back button stopped working on random occasions and website. Issue is never consistent..

HP laptop, Windows XP, FF 4.0. Don't remember changing any add ons or version of FF when the issue started. Sometimes when I opened a new page off a web site the back button works and I can go back to the home page, sometimes it does not work. This is totally random. I use multiple tabs for news sources and this issue is not associated with a particular site. Short of uninstall and reinstall, loosing all my add ins and features, I don't know how to fix this. I have been using FF for years on this computer. This bug just started a couple of weeks prior to FF 4.0 coming out.

Do you have the McAfee Site Advisor, that one is known to cause problems with the back button. If you have it try disabling it and the back button should function normally.
If you do not have that add-on, you can check to see if another add-on is causing this, for details of how to do that see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Time Machine back up stopped working.

Since July 21, I have been receiving the following message:
"Time Machine couldn't complete the backup to 'Larry's Time Capsule'. The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup. Latest successful backup: July 21, 2014, 5:54 pm"
The message also says I have 320 GB of 998 GB available, so I don't see how it can be out of space.
I've tried unplugging and re-starting the Time Machine; didn't help. I am running Mavericks OS X 10.9.4.
Suggestions would be appreciated.

I have done nothing different, changed nothing.
I doubt that you have been running Mavericks (10.9.4) since 2009. No firmware updates on the Time Capsule since 2009? What firmware is the Time Capsule running?
The very recent update to Mavericks 10.9.4 is causing some issues with Time Machine and networking in general.....and with the 7.6.4 firmware on the Time Capsule. So, chances are, a lot has changed......with the 10.9.4 change that you made just a few weeks ago.
LaPastenague will explain, I am sure.

My back camara stopped working it won't take a picture. It's like stuck or something. Any suggestions

Help if you can tell me anything about camara beeping stuck close

Try a reset:
Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

I need help.. My front and back camera suddenly stop working.

Few days ago, my front and back cmaera stop working. I tried all the possible options but still having the same problems.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
* No data is lost due to a reset

My remote iPad keyboard stopped working

My remote iPad keyboard stopped working

Any update?
Apple Support always say reboot your computer, unplug the keyboard, the keys are broken, ... But I bought 2 of these keyboards and they have the same frustrating problem. When you unplug them and plug them back they STOP working sometimes for long time or sometimes you have to hit the keys for a while to get the keyboard back.
Since about a year I just let my mb air powered on with my keyboard because I need my keyboard to work. (and it's hugely frustrating to start your day trying to get your keyboard working)
I just bough a mb pro late 2013 and the keyboard do not work at all.
All the best,
Sam

IPhone 4s back camera not working even after buying new iphone 4s

Back when the ios 6 updates were coming out in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone and finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

A new phone has a warranty. So take it to an Apple store. If they can't fix it, they will replace the phone. Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

My M-Audio Fast Track stops working when switching instruments/tasks in Garageband.

I bought an M-Audio Fast Track along with a few imacs for my students to use in my classroom. I have it installed and it works sometimes. I seem to have to have a fresh restart of osx and garageband, then it picks up the guitar and its usable with all the effects and cool stuff in garageband. If I switch something, like add another instrument guitar track, or switch to another task like browse for a bit then come back it stops working. I cannot get it to work again without restarting osx. It does not pickup the fast track if I restart garage band or replug in the usb.
I bought this through apple, so I figured it was supported and would work great for my stuents. I have found support has changed for this device.
Any tips before I look into returning it?
Sean

I think that definitely helped. When I switch sound devices I can get both the midi and m-audio to record at the same time without rebooting.
If your familiar with the m-audio box I still cannot get sound out of the headphone jack part of the box. Ive chosen that as the output in both audio settings in osx and the output in garageband. I can hit the monitor button on the box and hear a clean guitar, but no output as far as garageband effects go.

Wireless iTunes syncing stopped working

I used to be able to sync my iOS devices wirelessly with iTunes. A version or two back, that stopped working. I now have v11.2.2 (3) under OS X 10.9.3
I have tried unchecking, quitting and restarting and rechecking 'sync wirelessly' for each device.
The devices often appear in the leftmost panel when I start iTunes but selecting them causes a progress bar to appear and after 30 secs disappear and the device name is dropped from the list. This worked reliably for many years but stopped some months back after an iTunes update.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

TosBtMng has stopped working

I keep getting the following message whenever I boot the system:
"TosBtMng has stopped working" - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have downloaded patch and the relevant drivers, even then it is my blue tooth is not working and a small window pops up with the same message.
How to fix this problems? - Plesae help

I get exactly the same problem.
I have a Satellite with Vista 32 bit and the Toshiba Bluetooth stack. I only use it with my Nokia phone and it has never worked very well. - But it HAS worked.
A few weeks back, it stopped working alltogether and I decided to check for an upgrade on Toshiba's site. I've found "Bluetooth Stack-6.10.10" which supposedly is the most current.
I have removed the complete directory and even used regedit to remove all keys pointing to the dir, before rebooting and installing from scratch with no luck.
The PC was originally delivered with several languages, but I have chosen to install the English version of Vista. For some reason, the bluetooth stack insists on installing in Danish (and there is no way to change that). I have a feeling that this is at least part of the reason for the problem.
Since the problem suddenly occured. At one time, I had some kind of a loop with 20+ active TosBtMng.exe icons in the system tray. Every time I start it I get the following:
Problem signature:
Problem Event Name: APPCRASH
Application Name: TosBtMng.exe
Application Version: 6.0.0.41
Application Timestamp: 48035c96
Fault Module Name: LCWizard.dll
Fault Module Version: 6.0.0.3
Fault Module Timestamp: 48086c03
Exception Code: c0000005
Exception Offset: 0000654b
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1030
Additional Information 1: 2754
Additional Information 2: e9a6e859a1d82acb13beb9db09d30e0e
Additional Information 3: b4f0
Additional Information 4: 71c2b4bb7812ee3f7b43ad13722a43de
Hope you can help.

Hello Apple members, my iPad Air fell on the ground and camera stopped working, please how can you help me out, this is because the camera is so important especially when I am out for events, thanks

My iPad fell and the back camera stopped working, please help me out, thanks,

If it doesn't come back after you restore the iPad, it sounds like you've damaged the hardware, you'll need to take it to Apple or an authorized service center.
Matt

TSM Back is stop working

Similar Messages

Maybe you are looking for