Tsst corp cddvdw ts-l632h ata device in c736tu is not detected

hi all
my cd rom is not being detected besides i have applied all known corrections of driver update etc including the tips in HP support page...........................help me out plz

This can happen when you install CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it may load an incompatible Filter Driver in Vista and cause problems.
Try removing the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

Similar Messages

Satellite C655-S5044 won't recognize TSST CDDVDW TS-L633C ATA device after windows 7 update

Laptop: Toshiba Satellite C655-S5044; Windows 7 64-bit
DVD Drive - TSST CDDVDW TS-L633C ATA Device
After an automatic Windows update, the CD/DVD drive is no longer recognized.
Running troubleshoot on the PC yields:
Problem detected with TSST CDDVDW TS-L633C ATA Device Driver has been disabled
Checking for new drivers says I have the latest.
I tried running a microsoft fixit for DVD/CD drives - no problem found
I tried deinstalling the driver, then rebooting. This yields a message:
Device Driver was not successfully installed please consult with your device manufacturer.
I tried the TSST website for Toshiba and that rerouted me here.
Searching the forums I have seen similar issues with other hardware/OS combinations but not exactly the same.
Additional Info from the device manager:
Device Type: DVD/CD-ROM Drive
Manufacturer: (Standard CD-ROM drives)
Location: Location 0 (Channel 1, target 0, Lun 0)
I suspect that I have multiple device drivers on the computer for this device and the OS is installing one that doesn't work.
How can I get the correct current driver and install it?
Does anyone recognize this problem and have a fix?
Thanks.

Satellite C655-S5044
I didn't find that model anywhere.
Device Driver was not successfully installed please consult with your device manufacturer.
The driver is native to Windows. Sounds to me like a hardware malfunction.
After an automatic Windows update,..
In a Microsoft forum, they would tell you to do a System Restore to before the Windows Update. If that fixed the problem, then apply the updates one at a time to identify the culprit.
-Jerry

Error 2131 with Acer TravelMate & optical drive TSST TS-L632H ATA device

I cannot burn playlists to CDs. I have an Acer TravelMate 5720 running Windows Vista, and a TSST TS-L632H ATA optical drive, and I am using Verbatim CD-R recordable CDs (700MB, 52x speed, 80min.). I am able to burn data (pics, Word docs etc) from my C-drive to these CDs. Can anyone work out what is happening here? Many thanks!

This is a well know problem for this model of drive.
Toshiba and Dell have issued firmware updates to solve it, but I don't know of one for Acer although it's worth checking their download site.
I understand some people have attempted cross flashing, but this can render your drive useless so I wouldn't recommend it.
It might be worth seeing if you can get the drive swapped for another model if it is a new PC. Otherwise you are not going to be able to burn in iTunes.

TSST corp CDDVDW TS-L632N Device freezes 99% when burning

Hi I have this device on my HP Presario A900,whenever Itry to burn a disc it freezes o 99%,destroying countless discs
Can someone please help with this problem?
Thanx
Jack

What firmware level is your CD/DVD drive?
Try using a quality media such as Verbatim and avoid the cheap stuff. Have you tried using differnet applications to burn the media. Try Imgburn (it's a freebie).
Use R/W media until you can separate the problem between software and hardware as being the culprit.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

TSST corp cddvdw TS-L6334 missing

Apparently my driver disappeared no longer shows up as my driver. no longer reads cds or dvds. do I need to reinstall, if from where? I have a satellite model #A665-S6086

Here's the link that you can try to resolve the issue provided by Toshiba
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ct=SB&soid=445782&ref=EV
Just follow the steps and if it would not resolve the issue, you can try this
ClickStart, and then clickRun.
In theOpenbox, typeregedit, and then clickOK.
In the navigation pane, locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
In the right pane, clickUpperFilters.
NoteYou may also see an UpperFilters.bak registry entry. You do not have to remove that entry. ClickUpperFiltersonly. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 7.
On theEditmenu, clickDelete.
When you are prompted to confirm the deletion, clickYes.
In the right pane, clickLowerFilters.
NoteIf you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further.
On theEditmenu, clickDelete.
When you are prompted to confirm the deletion, clickYes.
Exit Registry Editor.
Restart the computer.
NOTE IF IT WOULD NOT WORK WE NEED TO DO A REINSTALLATION OF THE WINDOWS USING THE HDD PARTITION OF TOSHIBA REMEMBER THAT ONCE WE DO THIS ALL OF THE FILES WOULD BE DELETED AND WHAT WOULD ONLY BE BACK ARE THE SOFTWARES THAT CAME WITH THE LAPTOP WHEN YOU BOUGHT IT.
HERE'S THE LINK FOR HDD RECOVERY INSTRUCTIONS
http://aps2.toshiba-tro.de/kb0/HTD7C02140000R01.htm
Hope this helps

Trying to provision a device getting mirage could not detect the target device disk

We are trying to deploy Mirage to a LIVA PC. It is only UEFI boot, no legacy boot.. We are using the USB WinPE method. It simply does not see the disk. Any ideas?
Thanks

Hello,
In Mirage We are working only with Fixed Drives, the Storage in the Liva PC is eMMC Storage, we don't support this specific Storage that is in the Liva PC so you will not be able to provision the machine via BMP.
I can offer some troubleshooting steps hopefully you will be able to resolve this issue:
In the LIVA Mini-Pc:
Set the boot mode to use UEFI and not CSM (Compatibility Support Module) in your UEFI firmware settings.
Temporarily disable Secure Boot in your UEFI firmware settings. Some motherboards will not boot from a USB unless you do this first. When the Windows installation is finished, you can enable secure boot if you like.
If you have fast boot or ultra-fast boot enabled in your UEFI firmware (if supported), then you may need to temporarily disable it until Windows has finished installing to be able to boot from a USB flash drive at boot.
When Creating the WinPe Bootable ISO\Wim:
Verify that you added the eMMC Disk Drivers to the WimPE When Creating the Image.
please let me know if this helped you in resolving this issue.
Cheers,

Error while scanning for Serial-ATA devices.

There was an error while scanning for Serial-ATA devices. I'm not sure how to trouble shoot this. I believe a secondary drive in bay 2 died.

I also have just began to hit this issue.
I have 4 2T enterprise class WD drives in a raid 1+0 (or was it 0+1) config.
Device Model: WDC WD2002FYPS-01U1B1
One disk (disk0 in bay 2) keeps disappearing. Completely. /dev/disk0 and /dev/rdisk0 vanish.
If I look at "about this mac" / "More Info" / "Serial-ATA" I get the "error while scanning ...".
If I reboot, the offending disc comes back and the raid volumes start rebuilding.
The SMART status is (reported to be) fine.
I use the 'smartmon' tools and look at the extended SMART status and the values of the counters all looks the same as the other drives. I can run an extended offline test, which takes forever to execute. disk 1 and 3 eventually finish with success (it writes this status into a SMART log area on the disc).
Disk 2 and 0 take longer. I image this is because 2 is being read to resilver 0. Currently, I am running with disk0 absent again, and disk 2s test did not complete. It claims it was aborted by the host, so I imagine the one on disk0 will claim the same after I reboot.
My system is under extended AppleCare until 16 Jan 2011, so if I can determine that this is a disc controller error, I can get it fixed. The drives have a 5 year warrantee, and are less than 1yr old, so they are covered. I just need to figure out what the issue is.
I will now reboot and recover disk0 and see if perhaps there is anything recorded in the SMART log.
There is nothing in kernel.log specific to disk0. I include the log extract here for posterity. The "speed" volume is not raid 0+1, just striped, which is why it gets aborted.
Dec 21 23:30:26 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 21 23:30:26 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 04:17:22 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 04:17:22 8way kernel[0]: AppleRAIDMirrorSet::rebuild complete for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:23:16 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:23:30 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:23:44: --- last message repeated 1 time ---
Dec 22 05:23:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:14: --- last message repeated 4 times ---
Dec 22 05:24:19 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:24:56: --- last message repeated 2 times ---
Dec 22 05:24:56 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:25:17: --- last message repeated 1 time ---
Dec 22 05:25:17 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:25:31: --- last message repeated 1 time ---
Dec 22 05:25:31 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:25:45: --- last message repeated 1 time ---
Dec 22 05:25:45 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:15: --- last message repeated 2 times ---
Dec 22 05:26:21 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:26:51: --- last message repeated 4 times ---
Dec 22 05:27:12 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:27:33: --- last message repeated 1 time ---
Dec 22 05:27:26 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:27:40: --- last message repeated 1 time ---
Dec 22 05:27:40 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:28:24: --- last message repeated 1 time ---
Dec 22 05:28:24 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:28:39: --- last message repeated 1 time ---
Dec 22 05:28:39 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25
Dec 22 05:29:14 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76), member 3C6E9EA4-831A-4
57A-8CA5-6E7E9CBEED25, set byte offset = 222462894080.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::recover() member 3C6E9EA4-831A-457A-8CA5-6E7E9CBEED25 from set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76) has been marked
offline.
Dec 22 05:29:14 8way kernel[0]: AppleRAID::restartSet - restarting set "usr_2" (4EA5DD68-D6D0-4CF3-A741-BFBC5ECE8A76).
Dec 22 05:32:38 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:33:22: --- last message repeated 1 time ---
Dec 22 05:33:22 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:06: --- last message repeated 1 time ---
Dec 22 05:34:06 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002ca on 9722C38E-DFF9-468F-8DE5-809432493168
Dec 22 05:34:53: --- last message repeated 1 time ---
Dec 22 05:34:53 8way kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002ca detected for set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D), member 9722C38E-DFF9-4
68F-8DE5-809432493168, set byte offset = 35194773504.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::recover() member 9722C38E-DFF9-468F-8DE5-809432493168 from set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D) has been marked
offline.
Dec 22 05:34:53 8way kernel[0]: AppleRAID::restartSet - restarting set "sys_2" (C398B450-28A3-4C1D-A6A8-5B617661789D).
Dec 22 05:37:24 8way kernel[0]: AppleAHCIDiskQueueManager::setPowerState(0x13d64500, 2 -> 1) timed out after 100113 ms
Dec 22 05:37:44 8way kernel[0]: Failed to issue COM RESET successfully after 3 attempts. Failing...
Dec 22 05:37:44 8way kernel[0]: AppleRAIDMember::synchronizeCacheCallout: failed with e00002be on EB932B0E-8476-480C-BBD4-53A9A77D9FEF
Dec 22 05:37:44 8way kernel[0]: AppleRAID::recover() member EB932B0E-8476-480C-BBD4-53A9A77D9FEF from set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0) has been marked
offline.
Dec 22 05:37:44 8way kernel[0]: AppleRAID::restartSet - restarting set "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BBE0).
Dec 22 05:37:44 8way kernel[0]: disk4: media is not present.
Dec 22 05:37:59 8way kernel[0]: speed::terminate(kIOServiceSynchronous) timeout
Dec 22 05:37:59 8way kernel[0]: AppleRAID::completeRAIDRequest - underrun detected, expected = 0xa000, actual = 0x9e00, set = "speed" (190EC75B-C702-4481-ABCF-8C5A0D54BB
E0)
Dec 22 05:37:59 8way kernel[0]: disk4: data underrun.
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: dojnlio: strategy err 0x5
Dec 22 05:37:59 8way kernel[0]: jnl: disk4: end_transaction: only wrote 0 of 40960 bytes to the journal!
Dec 22 05:37:59 8way kernel[0]: disk4: media is not present.
Dec 22 05:38:00 8way kernel[0]: jnl: disk4: close: journal 0x13f34e04, is invalid. aborting outstanding transactions

Is iphone 4 having issues with Blue tooth?. I have checked four iphone brand new sets from different location. Not detecting other devices

Is iphone 4 Having issues with Blue Tooth connectivity ? Last saturday i have bought up iphone 4, when i checked that device blue tooth was not detecting the other iphones. I went to apple store in Ottawa. They checked with their Mac computers. They said Yes this iphone is having problem. Please exchange it on the store you bought up. I have exchanged that iphone with brand new, again same issues...
iPhone is not detecting other devices with Blue Tooth. I have checked with other two. they having same problem.
Please tell me, What apple gonna do with my iphone now ? Should i keep it ? or cancel my contract with cell phone company. As i am sure they not going to replace it again or gonna make excuses.
Waiting for replies [email protected]

I have upgraded my iphone 3 to a 4. I just recently discovered that while the iphone 3 automatically discovers bluetooth but the iphone 4 does not (couldn't discover any bluetooth). My bluetooth is Jabra SP200. It turned out, there are other steps to take with the bluetooth device to pair with the iphone 4. As stated, iphone 3 detected it automatically. But w the iphone 4, I had to press and hold the answer button of the Jabra for it to pair with iphone 4. Call the bluetooth manufacturer directly and check with their alternative pairing procedures.
Hope this helps.

TSST Corp. TS-H652D will not function with iTunes installed.

I have a TSST Corp. TS-H652D DVDW.
When iTunes is installed the device can not start, (Error Code 10).
When I uninstall iTunes it functions as it should.
Does anyone know how I can correct this?

Cunning1_
You are a legend!! I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!! I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!! Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
Whatever - one step and now I can enjoy my music through my house again!
Thank you, Thank you, Thank you

Windows 7 (64 bit) driver for the matshita bd-cmb uj-120 ata device for my hp pavillion dv6478

I recently upgrade my OS from Vista 64 bit to Windows 7 64 bit and the driver for my DVD player has a yellow question mark on it and I need to know if there is a driver for matshita bd-cmb uj-120 ata device for windows 7 64 bit

Hi,
Hope this helps:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there now a system call to send pass-through commands to ATA devices?

I want to send pass-through ATA commands to SATA/ATA devices on intel-based solaris. From the beginning the USCSICMD ioctl has worked just fine on SCSI/SAS/FC targets on intel & sparc-based solaris, but the mechanism to send pass-through commands to ATA devices has always been undocumented, closed, unavailable, whatever.
Is there now a way to do this w/o writing a custom device driver? Does anybody have an example chunk of code that does something simple like send the ATA IDENTIFY command to a disk drive? I know I can use SATL to encapsulate commands to SATA disks using certain SAS controllers, but I really need a way that will work with devices that are plugged into a standard SATA port on a motherboard.
Thanks

Hi Dhalek,
Just tried out a small example and it works ok in SQL Dev 4
drop table t1;
create table t1 (col1 int);
insert into t1 values (1);
insert into t1 values (2);
insert into t1 values (3);
select * from t1;
/*sqldev:stmt*/BEGIN;
DELETE FROM t1;
SELECT * FROM t1;
/*sqldev:stmt*/ROLLBACK;
SELECT * FROM t1;
---- RESULT ----
table T1 dropped.
table T1 created.
1 rows inserted.
1 rows inserted.
1 rows inserted.
col1
1
2
3
/*sqldev:stmt*/BEGIN
3 rows deleted.
col1
/*sqldev:stmt*/ROLLBACK
col1
1
2
3
Regards,
Dermot
SQL Developer Team

Opticarc BD ROM BC-5500S ATA Device Help

I have a laptop with an Opticarc BD ROM bc-5500s ata device. The problem is the drive fails to recognizes inserted disks with data. I've contacted HP and they provided the following trouble shooting solutions.
1.      Power drain.
2.      Check for the drive in the BIOS.
3.      Reseat the optical drive.
4.      Check for the presence of the optical drive in Device Manager.
5.      Uninstall and reinstall drivers in Device Manager.
6.      Delete upper and lower filters from the windows registry
The drive recognizes that a disk has been inserted but it recognizes the disk as blank even when there is data on the disk. (It tries to format the disk as a new disk.)
The trouble shooting solutions provided have not rectified the problem. The only way to get the drive to recognize a disk is to delete the driver in the Device Manager, Scan for New Hardware and Reinstall; sometimes with a reboot and sometimes not. I guess this is okay as a work around solution but it is a pain to delete and reinstall the drive every time I want to use it.
If anyone has a more permanent fix, the help would be greatly appreciated as this is extremely frustrating considering it's a relatively new system.

Im also still waiting for a firmware update for this device. My Dv7 wont play any blu-ray since may 09 and I was quite shure that a software update would sort this thing out. In September my laptop's warranty expired and HP says they cant help me anymore.
I notice that there are lots of people out there having the same issues with this hardware. Just for the record, my symptoms are I put in a Blu-ray disc and the drive spins up and down repeatedly like it's trying to read, but nothing ever happens on the screen. The OS never realizes there is a BD in the drive.
It used to play some blu-rays but one day just stopped working. When I go into my computer to view the drives, and have a blu ray disk in (tried this with 4 blu rays) it thinks there is no disk at all in the drive. I've tried updating firmware, updating quickplay, downloading powerdvd 9, checked drivers in device manager and pretty much anything else I can think of. So now Im at the point where I think the drive might be bad but dont really want to fork out the money for a new one if I dont really have to.

What is an ATA device

What is an ATA device I really need to know can you help me

It is a term related to the type of disk drive interface. For a MacBook Pro, however, you need a SATA (Serial ATA) notebook drive. You can find them at OWC.

Sony dvd-rw dru-820a ata device on Windows 8

sao paulo, (Brazil), January 26, 2013.
Hi ! I´ve just converted my computer to Windows 8 and the Drive SONY DVD RW DRU-820A ATA DEVICE is not OPERATING any more ! Would you pleas help ? We need the computer for working purposes. Thanks,
jose gonçalves brazuna
phone: (55-11-3285-4625)
e-mail: [email protected] or [email protected]

Hello Jose,
Welcome to the Sony Community.
You can contact Sony Storage support team by e-mail at [email protected] for assistance
If my post answers your question, please mark it as an "Accepted Solution."
Thank you for your post.

No ATA device present?

I have a macbook 2007 with a disc drive issue. I can put a cd or dvd in the drive, and it accepts it and spins it, but nothing is coming up on the desktop. And i cannot eject the disc either with the eject button or the manual ways i've read about (holding down the trackpad button during startup, the credit card method, etc.)
I've restarted several time and I've attempted reseeting the power management. no change.
I should also state that this is a drive that i have recently installed. the old one was bunk, and I have replaced it with another used one. However, it was working properly when I installed it. I have since having this current issue, gone back in a made sure everything is connected properly.
Under the system profile it shows under ATA that no ATA device is present, and a similar message is showing under disc burning.
is there any hope for this one, or do I need to blow more money on this thing?

Wolczk, it was taken from a little bit newer model supposidly. The mackbook has a Serial-ATA hard drive. The optical drive shows up under hardware>ATA.
thraex, I woudn't be surprised. However, i have taken it apart for the third time and removed the drive and reinstalled it, and now it seems to be working. So i guess I didn't have it plugged in all the way or something. No clue.
thanks for the responses.

Tsst corp cddvdw ts-l632h ata device in c736tu is not detected

Similar Messages

Maybe you are looking for