TSST corp CDDVDW TS-L632N Device freezes 99% when burning

Hi I have this device on my HP Presario A900,whenever Itry to burn a disc it freezes o 99%,destroying countless discs
Can someone please help with this problem?
Thanx
Jack

What firmware level is your CD/DVD drive? 
Try using a quality media such as Verbatim and avoid the cheap stuff.  Have you tried using differnet applications to burn the media.  Try Imgburn (it's a freebie).
Use R/W media until you can separate the problem between software and hardware as being the culprit.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • Tsst corp cddvdw ts-l632h ata device in c736tu is not detected

    hi all
    my cd rom is not being detected besides i have applied all known corrections of driver update etc including the tips in HP support page...........................help me out plz

    This can happen when you install CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it may load an incompatible Filter Driver in Vista and cause problems.
    Try removing the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

  • TSST corp cddvdw TS-L6334 missing

    Apparently my driver disappeared no longer shows up as my driver. no longer reads cds or dvds. do I need to reinstall, if from where?  I have a satellite model #A665-S6086

    Here's the link that you can try to resolve the issue provided by Toshiba  
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ct=SB&soid=445782&ref=EV
    Just follow the steps and if it would not resolve the issue, you can try this
    ClickStart, and then clickRun.
    In theOpenbox, typeregedit, and then clickOK.
    In the navigation pane, locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    In the right pane, clickUpperFilters.
    NoteYou may also see an UpperFilters.bak registry entry. You do not have to remove that entry. ClickUpperFiltersonly. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 7.
    On theEditmenu, clickDelete.
    When you are prompted to confirm the deletion, clickYes.
    In the right pane, clickLowerFilters.
    NoteIf you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further.
    On theEditmenu, clickDelete.
    When you are prompted to confirm the deletion, clickYes.
    Exit Registry Editor.
    Restart the computer.
    NOTE IF IT WOULD NOT WORK WE NEED TO DO A REINSTALLATION OF THE WINDOWS USING THE HDD PARTITION OF TOSHIBA REMEMBER THAT ONCE WE DO THIS ALL OF THE FILES WOULD BE DELETED AND WHAT WOULD ONLY BE BACK ARE THE SOFTWARES THAT CAME WITH THE LAPTOP WHEN YOU BOUGHT IT.
    HERE'S THE LINK FOR HDD RECOVERY INSTRUCTIONS
    http://aps2.toshiba-tro.de/kb0/HTD7C02140000R01.htm
    Hope this helps   

  • Adobe Encore Problem: 'Device Not Ready' when burning to BluRay

    Hi Im using Encore cs6 to burn to BluRay.  The programme runs for about 20 mins or so then suddenly stops and the message 'device not ready' comes up.
    I downloaded and tried ImgBurn to make sure my BluRay drive was working properly and it had no problems, the problem is just with Encore.  I saved my Encore project as an image in order to burn with Imgburn but it did not take across the menu I had designed.
    Im under a deadline to get this dvd finished, does anyone have any ideas?
    Im using an Alienware computer on Windows 8.
    thanks!
    Tony

    I don't recall this occurring with imgBurn or Encore doing the burning. I can only imagine that your project is corrupt.
    I would create a new, test project, to see if the menus "behave."
    Create a new Encore project, new name, in the new project settings make it Bluray.
    Add menus from the library: Crib Menu HD and City Lights HD. On Crib, in properties, motion tab, click on the video option and hit delete (this will remove the motion from the menu).
    On that same menu, delete the bottom two buttons. On the city lights menu, delete all buttons but the top.
    Select the m2v file (from the Crib motion menu) and select new timeline. Select that timeline and set the end action as "Last menu."
    On the Crib menu, link the top button to the City menu. Link the second button to the timeline.
    On the city menu, link the button to the Crib menu.
    Build to a BD image. Burn with ImgBurn. Are the menus the same?

  • My TSSTcorp CDDVDW TS-L632N unable to read or write

    I'm facing the same problem with HP Pavillion dv9704tx laptop.
    My TSSTcorp CDDVDW TS-L632N unable to read or write. It tries to detect & when clicking the my computer icon it says to insert the CD/DVD. Device manager shows that it is installed & My computer also displays the drive.
    Windows Vista 32 bit system.
    P/N: KD347PA#ACJ
    S/N: CNF8018GFB
    P/N: KD347PA#ACJ
    S/N: CNF8018GFB

    Hi,
    Unless you are using OCR (optical character recognition) software when doing the scan, the result of scanning a document is only an image, a picture of the document. Since you only have a picture of the document at this point, the only thing that you can do with it in Word is to insert the image into the document. As an image, you won't be able to edit or search the text that appears in the image. You need to run OCR software to examine the image and convert the images of the characters into editable text. If you are already using OCR software, reply back and let me know which application you are using, and I'll try to help you further.
    Hope this helps,
    Ken

  • TSST Corp. TS-H652D will not function with iTunes installed.

    I have a TSST Corp. TS-H652D DVDW.
    When iTunes is installed the device can not start, (Error Code 10).
    When I uninstall iTunes it functions as it should.
    Does anyone know how I can correct this?

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

  • HT4759 I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

    I just updated my iPad to the new ios and now it won't let me use iCloud. I have been in my settings and it says I need to agree to the new t&c's but when I click to do it my device freezes. Any Idea what I can do as I can't download new app either

    Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
    Maybe it's time to buy yourself a new iPod Touch.

  • After 10.3.1 update, device freezes

    Hi,
     I found the my Q10 freezes after updating to os 10.3.1.1581
    Customization ringtones works as expected only for calls, doesnt work for mails and other messages and also Customised  LED dont work.
    Freezes once in while if i search for contacts and displays few contacts.Edited Content to Comply
    Mod Edit: Edited post to rename as a separate Topic
    Solved!
    Go to Solution.

    jhanks64 wrote:
    What happened to the Sachesi thread?  I was taken here when I clicked on the link in the email with subject:
    Re: Upgrading BB10 OS Using Sachesi for an OTA-like Update (BlackBerry® 10 OS Device Software Subscription Update)
    @jhanks64 
    These few posts about device freezing were extracted and move to their own thread, since they were not relevant to the Sachesi thread, which is still located here > Upgrading BB10 OS Using Sachesi
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • ITunes freezes (SWOD) when iPOD is connected

    Since the latest iTunes upgrade to 7.7.1, iTunes freezes (SWOD) when my iPOD is connected. Worse, if one clicks on iTunes to make it the foreground application, the entire system becomes frozen and only powering off/on with the power button gets the system back (unless one forgets to disconnect the iPOD in which case one is back where one started).
    This is an old iPOD that uses a firewire connection. Given how difficult it is completely crash a *nix-based system, I suspect a hardware interrupt is behind this but who knows? Searching the knowledge base and forums hasn't lead to any solution.
    Any suggestions?
    Thanks!

    You mean a clean install or system restore of Windows Vista?
    Wow -- I hope it doesn't take something that extreme...
    (And again: gawd I hate Windows!)
    Any other suggestions of things to try/look at before resorting to that?
    Also -- when I go to Device Manager, there are no issues at all in the USB controllers list -- and in fact my iPod isn't listed there at all. However, in the "Portable Devices" section , my iPod is listed there -- and the properties says that the driver is provided by Microsoft (not Apple) and is dated 6/21/2006 and is version 6.0.6001.18000

  • [SOLVED]Video device file switches when starting Motion in daemon mode

    I am not sure whether this should be here or in Kernel and Hardware.
    Motion live stream shows gray frame which says "Unable to open video device" and /var/log/errors.log gives:
    Failed to open video device /dev/video0: No such file or directory
    Could not fetch initial image from camera
    Motion continues using width and height from config file(s)
    When I plug my Philips SPC1300NC webcam in it shows up as a recognized usb device, both by lsusb and under /dev.  Initially it comes in as /dev/video0, but after running motion the device file is /dev/video1.  If I kill motion, the device file still being video 1, and edit the configuration file (/etc/motion/motion.conf) to use /dev/video1 instead of /dev/video0 the device file name changes back when I start motion.  It is always opposite of whatever I have in the configuration file.
    system: arch arm
    user is in video group
    output of lsusb:
    $lsusb
    Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. LAN9500 Ethernet 10/100 Adapter
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
    Bus 001 Device 116: ID 0471:0331 Philips (or NXP) SPC 1300NC PC Camera
    video device configuration:
    # Videodevice to be used for capturing (default /dev/video0)
    # for FreeBSD default is /dev/bktr0
    videodevice /dev/video0
    ls /dev before running motion:
    ls /dev | grep video
    video0
    ls /dev after running motion in daemon mode (still running):
    ls /dev | grep video
    video1
    So far I have attempted to remove and add back in gspca modules with and without device plugged in.
    That was the only tidbit I could find online regarding the issue.  I have had motion set up with this camera before, but it was on a different machine running x86_64 arch.
    thanks
    SOLUTION
    I wasn't thinking about the draw for the camera and was trying to just have it powered through the usb on a raspberry pi (need a powered usb hub).  I am not sure however why the device file switches when there is not enough power, so if you come across this an know please post a reply.
    Last edited by brewforce (2013-01-31 03:05:08)

    andre.ramaciotti wrote:And I'm not sure if you should put that & after exec awesome. It works fine here without it.
    No & after entries in .xinitrc . You've commented out the awesome entry.

  • IPod touch freezes up when deleting apps

    My iPod touch is freezing up when I try to delete any apps from the main screens ( not in usage.  I have to reboot and at times it will not reboot right away. Do you know what I can do to fix this issue?

    Just the standard fixes:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.                       

  • I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

    I have iPhone 5s. After updating to 8.0.2 , it freezes often when i cut the call... happened 7 times ... had to switch off every time .... what to do?????? help....

    Hi there SraZamora,
    The troubouleshooting steps in the article below can be helpful when troubleshooting unresponsive devices.
    iOS: Not responding or does not turn on
    -Griff W.

  • Lightroom 5.7.1 64bit constantly freezes up when importing, requiring a reboot.

    Hey folks
    Running Windows 8.1 As of a week ago, Lightroom 5.7.1 64bit constantly freezes up when importing, and it take a reboot for it to successfully import again. Nothing about my operating system or environment has changed (no new devices plugged in).
    This is a total pain.
    I've uninstalled/reinstalled Lightroom, but that hasn't helped.
    Can anyone assist?  Thanks.

    Hi Panda,
    I basically left it - and left it - and left it. Eventually it recovered, and started importing photos. So my experience was that it will work eventually - it just takes ages, and looks like it's hanging at first.
    I think I left it for three days in total. After the spinning beach ball appearing for many hours, it did start slowly importing.
    Good luck!

  • Adobe Bridge CC freeze always when plugin selecting folder.

    Adobe Bridge CC freeze always when plugin selecting folder.

    Can you be more specific with this problem, I'm not sure I understand what you mean with plug in.
    maybe this page might be of help to you to describe the problem furthermore:
    http://forums.adobe.com/thread/375816?tstart=0

  • Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

    My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with  multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
    My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a  32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
    I run Photoshop CS4 on this unit.
    after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
    They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
    I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
    the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
    This system with Photoshop CS5, freezes up faster then the CS4 system.
    When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
    when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
    I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
    People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

    Thanks everyone for jumping in with both feet.
    Let me review what I have already done.
    (1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
    I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets  are the most preferred pen tablets for professional illustrators.
    I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
    A number of the helpful people here have tried to advise this to me but I have already be down tha road.
    (2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
    Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
    I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
    I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
    But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
    Bye the way I really enjoy the humor, the Mac people are very serious people.
    the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
    We PC users have been given no such expecatations. THANKS NOEL
    Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
    and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
    (3) the memory, CPU and mother board can not be ruled out  completly, just yet
    As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
    I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
    Do any of you work with files like I have been talking about? and if so do you experience any problems?
    The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
    I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
    I hope I will be able to up load the screen shots so you all can have a look see.
    The CPH is more than likely not the problem.
    I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
    dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
    Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
    Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
    I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

Maybe you are looking for