TSV_TNEW_PAGE_ALLOC_FAILED Dump in Production BW 3.5 system
Hi Basis Gurus,
In our production BW 3.5 system we are getting dump in ST22.
The dump is TSV_TNEW_PAGE_ALLOC_FAILED
Please let me know what could be the reason for this dump and why we are getting it.
I tried searching in service market place and there we can find lot of things related to this dump.But not sure which one is specificaly related to this dump.
Our system details are as follows
BW 3.5
Solaris OS
Oracle Database.
Please help me in resolving this dump.
Regards,
Anil.
Hello Anil,
what is the frequency of these dumps.
If the dump once in a while,you can simply ignore it
If frequency is more....you will need to reasrch a bit before increasing the paging memory as suggested previously
Just check what program is causing the dump,is it SAP standard program or a z program created by your developers.
If it is a SAP standard program just search on market place and look if any new version of the program exists which is tuned better and which consumes less memory
If it is a z program ask your developer to tune the program(this can be a highly cause of this dump as programs created usually consume a lot of memory due to which this dump occurs)
If none of these help,go for increase in the paging memory as previusly suggested
Rohit
Similar Messages
-
Dump in production system :Incorrect status in pricing
Hi All,
We have patched out SRM5.5 server system recently with 15 and 16 patch.
After the patch we are getting many dums in production system.
When i check in the ST22 ,the error syaing that
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
*Incorrect status in pricing*
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
and i have checked the IPC ,it is also active only,.
We have got his issue all of suddenlly,
Can any one tell us what could be the issue.
Regards
cbHi All,
thanks a lot for your response ,
I have done the Simulation which shows everything is fine and i have chcked with BBP_CND_CUSTOMIZING_CHECK t-codes even that is also correct only .
we are plannning for rasing the issue with SAP.
Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
@Robin which the badi we can check.
once agina thanks a lot for your replys.
Regards
cb -
Too many abap dumps in production system
gurus ,
i have a doubt . there was around 56 abap dumps by a single user .
i just want to know whether having these much of abap dumps in the production will hit performance system in a way or other ?
if so i can make alert them on the criticality of running a report in production ."the problem is , most of the dumps are SYNTAX_ERROR which are generated by the customized reports created by the users"
Good! I much prefer them to the "there is something wrong with your system" type dumps.
"these people make a direct attempt in production directly resulting in lot of dumps .
we have a quality client with the latest production datas , but they dont do their first .
i am not sure whether this practice will really hit any performance issue .
if so then i can insist them the importance of being alert before making an attempt in production"
Bad, bad, bad practise.
As you have mentioned a QA system, I'm assuming that you have at least a 3 tier landscape ... tell the developers to use it!
p.s - the problem isn't so much that the users are running the reports directly in Prod, it's that the reports haven't been tested properly before they reach the Prod system ! -
CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test
Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught in
procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
that this file is
not open. Therefore, the file cannot be accessed.The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.
-
Dump in Production due to CALL_FUNCTION_OPEN_ERROR???
Hi all,
I am getting lot of dumps in Production with following details
What happened?
Error in ABAP application program.
The current ABAP program "SAPLOLEA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An error occurred when executing a Remote Function Call.
"Protocol error when communicating with SAPGUI."
Status of connection.... "RFC DRV=GUI INPUT"
Internal error code.... "RFC_IO20"
When communicating with SAPGUI, a protocol error was detected.
Any have Idea for this ?Dear Vipin
That is a very complicated error, difficult to analyze.
First I would recommend an update of the SAP GUI onto the newest patch
level. Additionally please update the SAP kernel to the latest patchlevel and the RFC libraries!
If that all should not help, deeper analyses are to be made so in your system.
For that you should then create a support message.
Best regards
Sven -
ZReport getting dump in Production but not in Quality and development
Hi,
There isa Zreport which displays daily stock in PP module.
It is getting dump in Production not in quality and development.
Since four days it is getting dump. Before that it is fine.
Please any one guide How to resolve.
Advance Thanks.Runtime Error SAPSQL_IN_ITAB_ILLEGAL_OPTION
Occurred on 29.08.2007 at 08:50:13
<u>Invalid value in OPTION field of value table for IN itab operator.</u>
What happened?
<b>Error in ABAP application program.</b>
The current ABAP program "ZPPRDR417" had to be terminated because o
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admin
termination messages, especially those beyond their normal deletio
date.
<b>Error analysis</b>
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here.
<b>How to correct the error</b>
Use only one of the permitted values in the OPTION column.
Information on where terminated
The termination occurred in the ABAP program "ZPPRDR417" in "WIP_STOCK_REP
The main program was "ZPPRDR417 ".
The termination occurred in line 330 of the source code of the (Include)
program "ZPPRDR417_FORM"
of the source code of program "ZPPRDR417_FORM" (when calling the editor 33
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
003000 ? r_bwart-low = '106'.
003010 ? append r_bwart.
003020 ?
003030 ? r_bwart-low = '124'.
003040 ? append r_bwart.
003050 ?
003060 ? r_bwart-low = '125'.
003070 ? append r_bwart.
003080 ?
003090 ? select matnr
003100 ? werks
003110 ? into table i_marc
003120 ? from marc
003130 ? where ( matnr LIKE 'BILC%'
003140 ? OR matnr LIKE 'LGN%'
003150 ? OR matnr LIKE 'BRN%'
003160 ? OR matnr LIKE 'EBB%' )
003170 ? AND matnr NE 'BRN_DECLASSE'
003180 ? AND matnr NE 'BRN_SAF'
003190 ? and werks in r_werks.
003200 ?
003210 ? r_material-sign = 'I'.
003220 ? r_material-option = 'EQ'.
003230 ?
003240 ? loop at i_marc into wa_marc.
003250 ? r_material-low = wa_marc-matnr.
003260 ? append r_material.
003270 ? endloop.
003280 ? clear r_material.
003290 ?
> ? if not i_matdoc is initial.
003310 ? select MBLNR
003320 ? MJAHR
003330 ? ZEILE
003340 ? BWART
003350 ? MATNR
003360 ? WERKS
003370 ? SHKZG
003380 ? MENGE
003390 ? UMWRK
003400 ? into table i_mseg_qty
003410 ? from mseg
003420 ? for all entries in i_matdoc
003430 ? where MBLNR eq i_matdoc-MBLNR
003440 ? and MJAHR eq i_matdoc-MJAHR
003450 ? and BWART in r_bwart
003460 ? and matnr in r_material
003470 ? and werks in r_werks.
003480 ?
003490 ? sort i_mseg_qty by matnr. -
Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
Name : Seagate Backup+ BL Media
Type : Disk
Partition Map Scheme : Master Boot Record
Disk Identifier : disk1
Media Name : Seagate Backup+ BL Media
Media Type : Generic
Connection Bus : USB
USB Serial Number : NA5B83S2
Device Tree : IODeviceTree:/PCI0@0/XHC1@14
Writable : Yes
Ejectable : Yes
Location : External
Total Capacity : 1 TB (10,00,20,48,85,504 Bytes)
Disk Number : 1
Partition Number : 0
S.M.A.R.T. Status : Not SupportedSeagate website.
Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive. -
Mapping new product code from source system to old product code in Oracle COA
Mapping new product code from source system to old product code in Oracle COA
Here is the situation:
One of our legal entities is changing their product codes in their COA segment. We are not changing the code structure in the global SOB. Is there a workaround to pull the source system information into ADI (or any other tool) and map it to the current Oracle product code?
Thanks and regards,
[email protected]Only The Data of Your Code will Change
then if you are trying to copy a standarad sap-code , you need to copy
every include, FM
there is a Copy option over there in program
you can do tat
thnkx bhanu -
How to download run time ABAP dump in production environment
Hello,
I am getting run time ABAP dump in production environment. Please guide me onHow to download run time ABAP dump in production environment?
Also, please tell me how best can analyze that dump. Like there are tools like gdb, purify etc. to analyze problems in other languages.
Regards,
Sameer.Hi,
Go to ST22, and Double click on the error line, It will show you the detailed analysis.
See the section How to correct the error for details on error correction and the instructions to download the log( you can download in the format you want - HTML would be a nice option).
And there are no tools to analyze errors but ST22 has a large data regarding the location of the error, the reason and the source code which caused. So you need to use the debugger to reproduce the error and check the source code,
Regards
Karthik D -
Short dump in Production system !!!
Hi Experts,
We have getting a short dump for all actions in Production system. Suppose if we use se38 and tried to press display it shows a short dump error. Despite when we tried to use tcodes or using LSMW or try to execute a program or like this all type of actions its throws a short dump error. Dont know what is the reason behind that since the short dump is not the defined the reason for the dumb. Have any of you experts got this type of experience?. Pls give your ideas. Thanks in advance.Hello Kavi,
Contact your basis team. SNAP is a table which holds all ABAP dump. It looks like SNAP table is full and cannot accomodate new entries.
In any production enviornment, the SNAP entires will be deleted regularly and only dumps for the last 8 days will be available
Check if any job(SM36 or table tbtcp) is running for this program RSSNAPDL in your production system.
Thanks -
Hi Experts,
I got following error description in ST22.plz can anyone tell m
what will be the probable reason for this dump. How should i correct it?
Where i need to check?
Errore run-time DBIF_REPO_PART_ALREADY_EXISTS
Analysis:
Internal problem: You attempted to insert a program which already
exists partially at least. This is probably due to an inconsistency in the database tables.hi Sheetal,
What happened is your Basis guy might have not imported this TR properly.
I will tell what would have been your scenario. There is a program in production.
You deleted that program in developement and recreated the same and you moved it to production under one TR. Correct me if I am wrong in any of above.
Just ask your Basis to import this TR with overwrite option checked.
Reward all useful answers.
Regards,
Atish -
Getting Dump in Production system
Hi,
we are getting dump in one customise program due to missing include program.
how to transport this missing program.?
regards,
RameshHi,
run tcode SE10 in DEV system.
click on create -> select workbench request -> enter description of request -> enter
now double click on request -> click change end enter following
In first row
Program ID: R3TR
Object Type: PROG
Object Name: name of include. press enter
in second row
Program ID: LIMU
Object Type: REPS
Object Name: name of include. press enter
then click on release.
import this request in PRD system.
regards,
kaushal -
hi floks,
We have created one new DSO and moved to Production system. When we did data load and try activating the request we are getting a short dump. The screen shots are attached here with.
We did not face any problems in D and Q systems. Please let me know if you need any other information on this.Hi,
may be the data volume is high and also due to non availability of background process. Try reactivating the request in Prod.
Mostly it will occur due to no background process availability.
Let us know the details.
Reg
Pra -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in CRM
Hi Experts,
While accessing the custom componenet in CRM system we are getting the dump TSV_TNEW_PAGE_ALLOC_FAILED saying No more storage space available for extending an internal table. And we are not getting this dump every time we access this componenet. We get it on a particular time. And when we checked the shared memory in SHMA during that time, Free memeory is very less. Automatically after sometime the free memory gets increased. Then the dump does not occur. What could be the reason. Do we need to change any memory parameter. Kindly clarify.
Thanks & Regards,
Sundara.The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but none is available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error
TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
Are you using a 64-bit or a 32-bit system if it is a 64 bit system then refer to note 146289. This note shows how to Implement the SAP profile parameters.
See SAP Note 425207 for parameter limitations
Setting of em/initial_size_MB usually depends on the physical RAM on the server and if you have any other instances on that same server. According to note #146289 this can be increased to very high
values if there is sufficent RAM on the box.
Also please review the following notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
417307 Extractor package size: Collective note for applica
Regards,
Gervase -
VERY URGENT.... DUMP IN PRODUCTION STOPPED TRANSACTION .
"FUNCTION GROUP J1I7 CONTAINS ERROR"
THIS DUMP ERROR IS COMING FOR ALL EXCISE AND INVOICE TRANSACTION IN PRODUCTION.
CAN ANY BODY TELL WHY THIS ERROR COMING AFTER TRANSPORTING A REQUST.
PLEASE HELP ITS VERY CRITICAL.Hi!
Check out the given function group in SE80 transaction and try to activate it in the production system.
It will navigate you to the error.
Regards
Tamá
Maybe you are looking for
-
I-work 09 installs but doesn't open on my macbook pro 10.5.8
I recently had the trial version but that ran out, so i bought the boxed version......1st i installed the dvd and it still asked me for the serial number. As there is no serial number i went to applications, dragged the i-works folder to the trash a
-
Reg: HRforms converted to PDF and send email to individual employee
Hi Experts, The requirement is convert the HR form output to pdf and send email to respective employee in standard transaction. I copied RPCEDTX0 to ZRPCEDTX0 and include RPCEDS09 to ZRPCEDS09, the changes need to be done for individual PERNR, I hav
-
I have a SanDisk USB 2.0 Cruzer. Can I add information at different times? Can I erase individual items when I am through with them? How to I divide the individual folders etc. so I can find them again? Any help will be appreciated. Thanks JLR
-
Hi All, Q1. How does xellerate provide for passwords expiring every X days and count-down notifications are delivered to user to change password Q2. And also how does xellerate prompt a user to change his password when he attempts to authenticate wit
-
Hello, I'm a longtime Freehand user trying to come up to speed on Illustrator's flattening feature. Using Illustrator CS2 I've created an EPS file that will be imported into Multi-Ad Creator 'Professional' document for newspaper printing. I've examin