TSV_TNEW_PAGE_ALLOC_FAILED dump Issue
Hello All,
We are facing this dump error when executed from SM35.
It is a ECC 6 PRD system on Windows(64bit) & SQL server.
What Happened:
Information on where terminated
Termination occurred in the ABAP program "SAPLSBDR" - in "BDC_OBJECT_SELECT".
The main program was "SAPMSBDC_CC ".
In the source code you have the termination point in line 59
of the (Include) program "LSBDRU04".
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4019392
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000021120
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
Hello Venkat,
Please find the details as per the SAP Note,
1.Memory consumption
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4019392
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000021120
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
2.System Data
System environment
SAP-Release 700
Application server... "SAP-PROD"
Network address...... "172.23.0.112"
Operating system..... "Windows NT"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAP-PROD"
Database type..... "MSSQL"
Database name..... "AEP"
Database user ID.. "aep"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
3.R/3 Storage Parameter
a.SAP Memory
Roll memory Dialog session kB 6,348
Nondialog sess. kB 6,348
Available kB 262,144
in shared memory kB 262,144
on disk kB 0
Used kB 9,778
Maximum used kB 20,280
Paging memory Session buffer kB 1,200
Available kB 262,144
in shared memory kB 131,072
on disk kB 131,072
Used kB 13,721
Maximum used kB 262,136
Extended memory Dialog session kB 1,953,125
Nondialog sess. kB 1,953,125
Available kB 9,904,128
Used kB 2,801,664
Maximum used kB 5,255,168
Heap memory Dialog session kB 1,953,125
Nondialog sess. kB 0
Used kB 0
Maximum used kB 9,908,208
b. Current Parameters
Profile Parameter Value Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area 6500000 Byte
ztta/roll_first 1 Byte
ztta/short_area 4000000 Byte
rdisp/ROLL_SHM 32768 8 kB
rdisp/PG_SHM 16384 8 kB
rdisp/PG_LOCAL 150 8 kB
em/initial_size_MB 9676 MB
em/blocksize_KB 4096 kB
em/address_space_MB 4096 MB
ztta/roll_extension 2000000000 Byte Max.
abap/heap_area_dia 2000000000 Byte Max.
abap/heap_area_nondia 0 Byte Max.
abap/heap_area_total 10146021376 Byte Max.
abap/heaplimit 40000000 Byte
abap/use_paging 0
Edited by: Hasan Bilali on Mar 6, 2012 4:38 PM
Edited by: Hasan Bilali on Mar 6, 2012 4:41 PM
Similar Messages
-
Hi
I get blue dump issue 5 or 6 time in day .
Can you tell the reasons and the overcome solutions for this.
Regards
AmolYou will have to upload the .DMP file for analysis because there are literally thousands of things that can cause your system to crash.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
TSV_TNEW_PAGE_ALLOC_FAILED dump in WDBU: Assortment listing
Hi all,
when my SD consultants are executing WDBU either in background or foreground we are getting dump:
TSV_TNEW_PAGE_ALLOC_FAILED
details are as follows:
No more storage space available for extending an internal table.
Error anslysis
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1032
Number of rows: 6729552
Allocated rows: 6729552
Newly requested rows: 8 (in 1 blocks)
how to correct the error:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2718352
Extended memory (EM)........... 5002852296
Assigned memory (HEAP)......... 2000090624
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
earlier the values for
ztta/roll_extension and abap/heap_area_total was 2 GB
for corrections i have made changes in the parameters as follows:
ES/TABLE SHM_SEGS
ztta/roll_extension 5000000000
abap/heap_area_total 5000000000
I have AIX OS and the RAM is 16 GB on this particualr application server, which is central Instance.
the swap space allocated is 40 GB.
please tell me what to do to resolve this particular issues.
regards,
PriyaThe selection criteria when you go to WBDU T-code are:
Assortment User:
sales organisation - we are specifying it
Distribution channel - we are specifying it
customer no. - site - we are just specifying one site
Assortment List:
Assortment List Type
Control Data:
Donot use cycle - we are ticking this option.
Generate Merged Versions
Parallel Processing
Max Number Of processes
Logon/ server Group - we are specifying the server the instance server.
what else can the selection criteria be narrowed down to.
Also in the dump when it says "The internal table "???" could not be further extended"what is table ??? means.
When i was going through SAP Notes i found few notes : 542669, 959104 , 740976. But these are applicable to ECC 500 and 470.mine is ECC 6.0 and our APPL level is 12.
What do you think can be done in this situation..
we are using just one site.
Regards,
Priya -
GD13: TSV_TNEW_PAGE_ALLOC_FAILED dump: workaround
Hi All,
While executing GD13 transaction code for some functional activity, the below dump is occurring:
TSV_TNEW_PAGE_ALLOC_FAILED.
Neither we can not change any memory parameter for a temporary activity which is consuming high memory, nor the activity can be splitted in steps for business criticality. From BASIS point view what can be done to make the GD13 activity successful avoiding the memory issue?
System ECC 6.0 (Netweaver 2004s)
(One SAP note: 600176, is available, but that is for lower version, not applicable for ECC 6.0)
Please share your ideas.
Thanks & Regards,
Sujit.Hi Juan,
Thanks for reply.
Below is the dump details:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
Error analysis
The internal table "\FUNCTION=G_GLU1_ACCUMULATE_FOR_GD13\DATA=E_T_GLU1_***"
could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4764
Number of rows: 966
Allocated rows: 966
Newly requested rows: 2 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server gvaaps51_PRD_51 on host gvaaps51 (wp 5)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
I am not pasting the SAP recommendation for increasing memeory parameter values, which is generic.
I have to find some way to help the team to execute the activity.
Your suggestion will be highly appreciated.
Thanks & Regards,
Sujit. -
ABAP Dump issue while accessing Gateway
Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c 1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c 1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam -
Thread Dump issue with LD_ASSUME_KERNEL=2.4.1
Hi ,
When I take Thread Dump using 'jstack <PID>' in JDK 1.5 it givss me "sun.jvm.hotspot.debugger.DebuggerException" in the dump nothing more
I set LD_ASSUME_KERNEL=2.4.1 in my server to avaoid some other issue ( JVM crash some times)
Surprisingly, I can not stop my server ( my java process ) after that using our Shutdow scripts , Ctrl C or even "kill -9 <PID>",
I have to restart the machine or manually release uncleaned resources that my server occupied and restart the server
This happens Redhar 9 as well as in Linux ES.
Anybody faced similar problem?
Any help or information regarding this is highly apprecialted
Vasu
Thread Dump Output:
Caused by: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet0(Native Meth
od)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.access$800(LinuxDebuggerLocal.java:34)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$1GetThreadIntegerRegisterSetTask.doit(Li
nuxDebuggerLocal.java:431)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.run(Linux
DebuggerLocal.java:109)
sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_re
gs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.execute(L
inuxDebuggerLocal.java:134)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet(LinuxDebugge
rLocal.java:437)
at sun.jvm.hotspot.debugger.linux.LinuxThread.getContext(LinuxThread.java:48)
at sun.jvm.hotspot.runtime.linux_x86.LinuxX86JavaThreadPDAccess.getCurrentFrameGuess(LinuxX86
JavaThreadPDAccess.java:75)
at sun.jvm.hotspot.runtime.JavaThread.getCurrentFrameGuess(JavaThread.java:252)
at sun.jvm.hotspot.runtime.JavaThread.getLastJavaVFrameDbg(JavaThread.java:211)
at sun.jvm.hotspot.tools.StackTrace.run(StackTrace.java:42)
at sun.jvm.hotspot.tools.JStack.run(JStack.java:41)
at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
at sun.jvm.hotspot.tools.JStack.main(JStack.java:58)
Caused by: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet0(Native Meth
od)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.access$800(LinuxDebuggerLocal.java:34)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$1GetThreadIntegerRegisterSetTask.doit(Li
nuxDebuggerLocal.java:431)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.run(Linux
DebuggerLocal.java:109)
sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_re
gs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.execute(L
inuxDebuggerLocal.java:134)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet(LinuxDebugge
rLocal.java:437)@brain0
I've downloaded the glic-2.3.6 sources from gnu, so I could build it from those. I'm however reluctant to do this because I really don't want to break my install.
I do agree with you on the NPTL statement, but pvs relies on allegro, which relies on LinuxThreads. Allegro is not being ported to new versions of glibc, so that approach is unfortunately not viable.
@iphitus
I wasn't very specific - it's allegro as in a lisp environment.
I think I'll try and install an old version of arch on wmware instead. Is there anywhere you can check out glibc version numbering on old arch install isos (ie. do I need arch-0.[1-9].iso)? And anywhere you can download the old isos (tried filewatcher, but a lot of the older sites seem broken)?
Thanks for the replies,
Mads
PS. I noticed that you recommended slackware for old kernels in another thread. I'm however in a bit different situation as I need old versions of glibc. Furthermore I would prefer sticking to arch, but was wondering whether there were any specific reasons for not doing that. -
could anybody advice, ALV GRID FM(field catalog issue)is getting short dump, but workig fine for ALV LIST.
PERFORM create_field_catalog USING:
'TRAFFIC_LIGHT' ' ' 15 'Status' 'Status' ' ',
'VKORG' ' ' 15 'Sales Org' 'Sales Org' ' ',
'VTWEG' ' ' 15 'Dist Channel' 'Dist Channel' ' ',
'KUNRG' ' ' 15 'Payer' 'Payer' ' ',
'PAYER' ' ' 15 'Payer Name' 'Payer Name' ' ',
'KUNAG' ' ' 15 'Ship-To' 'Ship-To' ' ',
'SHIPTO' ' ' 15 'Ship-To Name' 'Ship-To Name' ' ',
'SHIPTOPAR' ' ' 15 'Bill to Party' 'Bill To Party' ' ',
'KDGRP' ' ' 15 'Customer Grp' 'Customer Grp' ' ',
'ZCUSTPO' ' ' 15 'Customer PO' 'Customer PO' ' ',
'VBELN' ' ' 15 'Billing Doc' 'Billing Doc' ' ',
'FKDAT' ' ' 15 'Billing Date' 'Billing Date' ' ',
'FKART' ' ' 15 'Billing Type' 'Billing Type' ' ',
'ZOUTPUT' ' ' 15 'Output Type' 'Output Type' ' ',
'NETWR' ' ' 15 'Net Value' 'Net Value' 'X',
'KWERT' ' ' 15 'Total VAT' 'Total VAT' 'X',
'WAERK' ' ' 15 'Currency' 'Currency' ' ',
'XBLNR' ' ' 15 'Reference' 'Reference' ' ',
'DELNO' ' ' 15 'Delivery #' 'Delivery #' ' ',
'TLINE' ' ' 15 'Manifest #' 'Manifest #' ' ',
'ZBOL' ' ' 15 'Bill Of Ldng' 'Bill of Ldng' ' ',
'LIFEX' ' ' 15 'Ext Del #' 'Ext Del #' ' ',
'POSNR' ' ' 15 'Item' 'Item' ' ',
'MATNR' ' ' 18 'Material' 'Material' ' ',
'KDMAT' ' ' 15 'Cust Matl' 'Cust Matl' ' ',
'WERKS' ' ' 15 'Plant' 'Plant' ' ',
'ZZPLAT' ' ' 10 'Platform' 'Platform' ' ',
'ZZPRONUM' ' ' 10 'Program' 'Program' ' ',
'ZZPROCODE' ' ' 10 'Prod Code' 'Prod Code' ' ',
'FKIMG' ' ' 15 'Qty' 'Qty' ' ',
'VRKME' ' ' 15 'UoM' 'UoM' ' ',
'ARKTX' ' ' 15 'Description' 'Description' ' ',
'KBETR' ' ' 15 'Price' 'Price' ' ',
'VATRT' ' ' 15 'VAT Rate' 'VAT Rate' ' ',
'KWERT_D' ' ' 15 'Item VAT' 'Item VAT' 'X',
'NETWR_D' ' ' 15 'Item Net Value' 'Item Net Value' 'X',
'VGBEL' ' ' 15 'Ref Document' 'Ref Document' ' ',
'VGPOS' ' ' 13 'Ref Doc Line' 'Ref Doc Line' ' ' .
FORM create_field_catalog USING fieldname TYPE c
inttype TYPE c
outputlen TYPE i
coltext TYPE c
seltext TYPE c
do_sum TYPE c.
DATA: l_f_fieldcat TYPE slis_fieldcat_alv.
l_f_fieldcat-fieldname = fieldname.
l_f_fieldcat-inttype = inttype.
l_f_fieldcat-outputlen = outputlen.
l_f_fieldcat-seltext_m = coltext.
l_f_fieldcat-seltext_l = seltext.
l_f_fieldcat-reptext_ddic = coltext.
l_f_fieldcat-do_sum = do_sum.
APPEND l_f_fieldcat TO t_field_catalog.
CLEAR l_f_fieldcat.
ENDFORM. "CREATE_FIELD_CATALOG
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_callback_user_command = 'F_USER_COMMAND'
i_grid_settings = f_grid_settings
is_layout = f_grid_layout
is_print = f_print_settings
i_background_id = 'BACK'
it_events = t_events[]
it_fieldcat = t_field_catalog
it_sort = t_sortcat[]
i_default = 'X'
i_save = 'A'
is_variant = f_variant
TABLES
t_outtab = t_output4
EXCEPTIONS
program_error = 1
OTHERS = 2.BEGIN OF t_output4 OCCURS 0,
traffic_light TYPE c,
vkorg LIKE vbrk-vkorg,
vtweg LIKE vbrk-vtweg,
kunrg LIKE vbrk-kunrg,
payer LIKE adrc-name1,
kunag LIKE vbrk-kunag,
shipto LIKE adrc-name1,
shiptopar LIKE likp-kunnr,
kdgrp LIKE vbrk-kdgrp,
zcustpo LIKE vbkd-bstkd,
vbeln LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
fkart LIKE vbrk-fkart,
zoutput LIKE dnast-kschl,
netwr LIKE vbrk-netwr,
kwert LIKE konv-kwert,
waerk LIKE vbrk-waerk,
xblnr LIKE vbrk-xblnr,
delno LIKE likp-vbeln,
t_line LIKE tline-tdline,
zbol LIKE likp-bolnr,
lifex LIKE likp-lifex,
posnr LIKE vbrp-posnr,
matnr LIKE vbrp-matnr,
kdmat LIKE lips-kdmat,
werks LIKE vbrp-werks,
zzplat LIKE vbrp-zzplat,
zzpronum LIKE vbrp-zzpronum,
zzprocode LIKE a802-zzprocode,
fkimg LIKE vbrp-fkimg,
vrkme LIKE vbrp-vrkme,
arktx LIKE vbrp-arktx,
kbetr LIKE konv-kbetr,
vatrt TYPE p DECIMALS 1,
kwert_d LIKE konv-kwert,
netwr_d LIKE vbrp-netwr,
vgbel LIKE vbrp-vgbel,
vgpos LIKE vbrp-vgpos,
END OF t_output4, -
Hi Expert,
I face a DTP shortdump issue on loading data from PSA to DSO
The DSO is write optimize.
DTP is using symantic loading and support 3 processor, pack size is default
Situation is as below:
1. This issue occurs every two days. In some situation, it will occur everday
2. The DTP will face short dump. Then when we rerun the DTP, everything goes will
3. Not all the system face this issue (for example, we have dev/qas/prd, this issue cannot be reproduced in qas)
Below is the shortdump point in ST22
when '3'.
select single * from rsmonicdp into l_s_monicdp where
rnr = l_rnr and
icube = p_ods and
dp_nr = i_datapakid.
if sy-subrc <> 0.
data: l_s_iccont type rsiccont.
data: l_s_reqdone type rsreqdone.
select single * from rsreqdone into l_s_reqdone where
rnr = l_rnr.
if sy-subrc <> 0.
message x000.
endif.
l_s_reqdone-datum = l_s_reqdone-datum + 3.
if l_s_reqdone-datum < sy-datum.
select single * from rsiccont into l_s_iccont where
rnr = l_rnr and
icube = p_ods.
if sy-subrc <> 0.
exit.
else.
message x000.
endif.
else.
message x000. (Shortdump here)
endif.
endif.
l_s_monicdp-status = icon_red_light.
Could you kindly let me know you face simulation issue before and possible solution?
Thanks and best regards
Alex yangHi KP,
Thanks for your information.
Please check below information in ST22 side
Error analysis
Short text of error message:
Status Manager *****
Long text of error message:
Technical information about the message:
Message class....... "RSSTATMAN"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_RSSM_STATMAN_TARGET_ODSO===CP" or "CL_RSSM_STATMAN_TARGET_ODSO===CM007"
"IF_RSBK_DATAPACKAGE_OBSERVER~UPDATE_STATUS_TABLES"
BTW, do you think this issue will be related to larger data volum in DSO side?
Thanks and best regards
Alex yang -
Dear All,
I have used a standard FM MS_EXCEL_OLE_STANDARD_DAT to get the data from internal table directly into excel.
But the issue is if the length of Header field and Respective Item field is not equal then i am getting short dump.
I should have the item table field data should be independent of Header data field length.
eg:
Project Status Start Date
NOCH 4/1/2008
in the above given eg header of 1st field Project Status is 14 char, where as NOCH is only 4 char,
but when i give the same i am getting Short dump when i give NOCH also of 14 char then it is not giving any short dump.
Appreciate for any replys
Thanks & Regards
NSKKindly Refer ...
TABLES: USR03,DD02L.
DATA: YX030L LIKE X030L.
DATA BEGIN OF YDFIES OCCURS 0.
INCLUDE STRUCTURE DFIES.
DATA END OF YDFIES.
DATA: BEGIN OF FLDITAB OCCURS 0,
FLDNAME(11) TYPE C,
END OF FLDITAB.
DATA ITABUSR03 LIKE USR03 OCCURS 0 WITH HEADER LINE.
DATA TNAME LIKE DD02L-TABNAME.
SELECT * FROM USR03 INTO TABLE ITABUSR03.
TNAME = 'USR03'.
PERFORM GETFIELEDS.
PERFORM SHOW123.
FORM GETFIELEDS.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
LANGU = SY-LANGU
ONLY = SPACE
TABNAME = TNAME
WITHTEXT = 'X'
IMPORTING
HEADER = YX030L
TABLES
FIELDTAB = YDFIES
EXCEPTIONS
INTERNAL_ERROR = 01
NO_TEXTS_FOUND = 02
TABLE_HAS_NO_FIELDS = 03
TABLE_NOT_ACTIV = 04.
CASE SY-SUBRC.
WHEN 0.
LOOP AT YDFIES.
FLDITAB-FLDNAME = YDFIES-FIELDNAME.
APPEND FLDITAB.
ENDLOOP.
WHEN OTHERS.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
with SY-SUBRC.
ENDCASE.
ENDFORM.
FORM SHOW123.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
EXPORTING
FILE_NAME = 'C:USR03.XLS'
DATA_SHEET_NAME = 'USER LIST'
TABLES
DATA_TAB = ITABUSR03
FIELDNAMES = FLDITAB
EXCEPTIONS
FILE_NOT_EXIST = 1
FILENAME_EXPECTED = 2
COMMUNICATION_ERROR = 3
OLE_OBJECT_METHOD_ERROR = 4
OLE_OBJECT_PROPERTY_ERROR = 5
INVALID_FILENAME = 6
INVALID_PIVOT_FIELDS = 7
DOWNLOAD_PROBLEM = 8
OTHERS = 9.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Regards
Renu -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in CRM
Hi Experts,
While accessing the custom componenet in CRM system we are getting the dump TSV_TNEW_PAGE_ALLOC_FAILED saying No more storage space available for extending an internal table. And we are not getting this dump every time we access this componenet. We get it on a particular time. And when we checked the shared memory in SHMA during that time, Free memeory is very less. Automatically after sometime the free memory gets increased. Then the dump does not occur. What could be the reason. Do we need to change any memory parameter. Kindly clarify.
Thanks & Regards,
Sundara.The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but none is available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error
TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
Are you using a 64-bit or a 32-bit system if it is a 64 bit system then refer to note 146289. This note shows how to Implement the SAP profile parameters.
See SAP Note 425207 for parameter limitations
Setting of em/initial_size_MB usually depends on the physical RAM on the server and if you have any other instances on that same server. According to note #146289 this can be increased to very high
values if there is sufficent RAM on the box.
Also please review the following notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
417307 Extractor package size: Collective note for applica
Regards,
Gervase -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in Production BW 3.5 system
Hi Basis Gurus,
In our production BW 3.5 system we are getting dump in ST22.
The dump is TSV_TNEW_PAGE_ALLOC_FAILED
Please let me know what could be the reason for this dump and why we are getting it.
I tried searching in service market place and there we can find lot of things related to this dump.But not sure which one is specificaly related to this dump.
Our system details are as follows
BW 3.5
Solaris OS
Oracle Database.
Please help me in resolving this dump.
Regards,
Anil.Hello Anil,
what is the frequency of these dumps.
If the dump once in a while,you can simply ignore it
If frequency is more....you will need to reasrch a bit before increasing the paging memory as suggested previously
Just check what program is causing the dump,is it SAP standard program or a z program created by your developers.
If it is a SAP standard program just search on market place and look if any new version of the program exists which is tuned better and which consumes less memory
If it is a z program ask your developer to tune the program(this can be a highly cause of this dump as programs created usually consume a lot of memory due to which this dump occurs)
If none of these help,go for increase in the paging memory as previusly suggested
Rohit -
Dump issue in standard transaction
I am getting a dump error in a standard transaction while clicking save option,
could you please confirm me whether the issue is with SAP standard transaction path fill missing or some thing else since when we will do the same steps in same transaction to some other server its not giving dump error.
Should I've to do any code changes in the standard transaction by registering access key request or is there would be any basis related issue.
Also, I debugg a lot and not sure from where the issue is comming.
Please suggest.I'm done with the debugging and found the reason for the problem.
Secondly as I said it a pure slandered transaction and we have not done any code changes, enhancement, BDT/BRF etc
so there in no way to get into depth for debugging since every line of code would be correct but the we need to find out where and why its getting stuck and throughing the dump.
Where
In DSAVE BRF event only its giving error as error message = E once no entry found in the internal table. however it has to get some data from some where but unfortunately its not collecting the data so it remain initial and its result error type and E which indicate dump with logical (feeder) system not determine
Why
SAP insurance module consist of CD, CM, ISM, Banking and where BP will act as a central component,
so there would be by default integration between BP and CD,CM,ICM,Banking. But I think the default connection between these all is not exist in our server, therefore once we are clicking save option in our process its not getting the path for interconnection with CM.
Final conclusion the integration between BP and CM is not establish hence its giving dump.
So could any one please tell me how to establish the integration between BP an CM, it might be related to BASIS issue but I welcome all who ever can provide the solution. (Might be we have to do some configration or something in SPRO-cross application - SAP BP - etc. )
Edited by: Helpfriends on May 23, 2011 10:15 AM -
TSV_TNEW_PAGE_ALLOC_FAILED dump
HI ,
The user is getting the TSV_TNEW_PAGE_ALLOC_FAILED error while running a some job
The amount of storage space (in bytes) filled at termination
Roll area...................... 6221072
Extended memory (EM)........... 2002738624
Assigned memory (HEAP)......... 3000059984
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 4294967295
he is getting this error while executing when ever he runs that jobIt is a z job of some archiving for PP_Order
For this user only we are getting this error for that perticular job.
The systme is ECC 6.0 Ehp6 oracle database .
SAP kernel....... 720
Memory consumption is
Roll.... 6221072
EM...... 2002738624
Heap.... 3000059984
Page.... 32768
MM Used. 4737199616
MM Free. 254668992
These are the current peremeters which were configured
abap/buffersize 2000000
em/initial_size_MB 40960http://
ztta/roll_extension 2000000000
ztta/roll_area 7000000
abap/heap_area_nondia 3000000000
in our system.
================
Category Resource Shortage
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 05.08.2014 16:44:40
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available. |
|What can you do? |
| Note which actions and input led to the error. |
| |
| For further help in handling the problem, contact your SAP administrator |
| . |
| |
| You can use the ABAP dump analysis transaction ST22 to view and manage |
| termination messages, in particular for long term reference. |
| |
| Try to find out (e.g. by targetted data selection) whether the |
| transaction will run with less main memory. |
| |
| If there is a temporary bottleneck, execute the transaction again. |
| - |
| |
| If the error persists, ask your system administrator to check the |
| following profile parameters: |
| |
| o ztta/roll_area (1.000.000 - 15.000.000) |
| Classic roll area per user and internal mode |
| usual amount of roll area per user and internal mode |
| o ztta/roll_extension (10.000.000 - 500.000.000) |
| Amount of memory per user in extended memory (EM) |
| o abap/heap_area_total (100.000.000 - 1.500.000.000) |
| Amount of memory (malloc) for all users of an application |
| server. If several background processes are running on |
| one server, temporary bottlenecks may occur. |
| Of course, the amount of memory (in bytes) must also be |
| available on the machine (main memory or file system swap). |
| Caution: |
| The operating system must be set up so that there is also |
| enough memory for each process. Usually, the maximum address |
| space is too small. |
| Ask your hardware manufacturer or your competence center |
| about this. |
| In this case, consult your hardware vendor |
| abap/heap_area_dia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each dialog process. |
| Parameters for background processes: |
| abap/heap_area_nondia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each background process. |
| Other memory-relevant parameters are: |
| em/initial_size_MB: (35-1200) |
| Extended memory area from which all users of an |
| application server can satisfy their memory requirement. |
|Error analysis |
| The internal table "\FUNCTION-POOL=SCD5\DATA=DATA_TAB_POS" could not be further |
| extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1568 |
| Number of rows: 424196 |
| Allocated rows: 424196 |
| Newly requested rows: 8 (in 1 blocks) |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221072 |
| Extended memory (EM)........... 2002738624 |
| Assigned memory (HEAP)......... 3000059984 |
| Short area..................... " " |
| Paging area.................... 32768 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following -
hi
i am having a issue in using the method raise_error_message.
I am using it for displaying a msg if the customer is locked.
currently if my system has locked a customer & i try to access it through,its give me the msg for user locked by user name.
but now i am facing a problem,if the some other user has locked the customer & me or any other system try to access the same customer,than this raise_error_message gives the dump & error message is not raised.
below is my code:
CALL FUNCTION 'ENQUEUE_EZMDAP_OCM'
EXPORTING
mode_zmdap_stat_hist = 'E'
MANDT = SY-MANDT
kunnr = ls_cr_gen_data-kunnr
X_KUNNR = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4 into lv_msgtxt.
get message manager
DATA lo_api_controller TYPE REF TO if_wd_controller.
DATA lo_message_manager TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager.
report message
CALL METHOD lo_message_manager->raise_error_message----<dump coming here for WebDynpro Exception
EXPORTING
message_text = lv_msgtxt.
Edited by: Vipin on Nov 9, 2009 3:39 PMHi,
you can even do in the following way..
CALL FUNCTION 'ENQUEUE_EZLOCK_PCT'
EXPORTING
MODE_ZRM_C_CV_OPEC = 'E'
MANDT = SY-MANDT
USERID = LV_USERID
LANG = LV_LANG
* INDEX1 =
* X_USERID = ' '
* X_LANG = ' '
* X_INDEX1 = ' '
* _SCOPE = '2'
* _WAIT = ' '
* _COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
CALL METHOD lo_message_manager->report_t100_message
EXPORTING
msgid = sy-msgid
msgno = sy-msgno
msgty = sy-msgty
p1 = sy-msgv1
p2 = sy-msgv2
p3 = sy-msgv3.
Using this you can even catch the exceptions thrown by the FM
Hope this helps you.
Priya -
Strange TSV_TNEW_PAGE_ALLOC_FAILED dump...
Hi guys!
I have this weird problem:
I have a program that does some updates to standard tables. The program runs ok, but if I comment the "update" lines, the execution ends with this dump: TSV_TNEW_PAGE_ALLOC_FAILED
With the UPDATE doesn't cancel, without the update DOES cancel...
Do you have any idea?????
Thanks in advance!
BetHi,
probably there is a loop with reading data in an internal table:
- without update the process does not terminate at all or nearly does not
- with update the process terminates soon.
With kind R´regards
Walter Habich
Maybe you are looking for
-
IPhone 5 - Can I swap out the sim card to use in China?
Can I swap out the US Verizon sim card in my iPhone 5 to use in China with a local Chinese carrier? What needs to happen? Thanks, Dxeph
-
Do I need antivirus on my iPad?
Hi, Please could someone tell me if I need antivirus on my ipad2? Only had it a couple of days but just wanted to make sure before I did any banking etc. Thanks in advance. Trish
-
Skype sms cannot be received by "Digi" network?
I use the Skype to send SMS to my friends in Malaysia. Unfortunately, all my friends using one of the carriers ( "Digi" network ) do not seem to receive my SMS. However, other friends using carrier ( "Celcom" network ) can receive my SMS successfully
-
Power outage caused display issue
we had a power outage that shut off the computer. After unplugging it until the power came back on; we found that when we turned the computer on the display just showed several 4" squares across the screen. The computer seems to have functionality st
-
Request: script to stream music for given amount of time
I'm looking for a bash script (or anything that will get the job done) that will: -stream music from my favorite internet radio station (ie: di.fm) -play stream for a given time in increments of 1hr (ie: 1 hr, 3 hrs, etc) -at the end of the given tim