TSV_TNEW_PAGE_ALLOC_FAILED dump
HI ,
The user is getting the TSV_TNEW_PAGE_ALLOC_FAILED error while running a some job
The amount of storage space (in bytes) filled at termination
Roll area...................... 6221072
Extended memory (EM)........... 2002738624
Assigned memory (HEAP)......... 3000059984
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... 4294967295
he is getting this error while executing when ever he runs that job
It is a z job of some archiving for PP_Order
For this user only we are getting this error for that perticular job.
The systme is ECC 6.0 Ehp6 oracle database .
SAP kernel....... 720
Memory consumption is
Roll.... 6221072
EM...... 2002738624
Heap.... 3000059984
Page.... 32768
MM Used. 4737199616
MM Free. 254668992
These are the current peremeters which were configured
abap/buffersize 2000000
em/initial_size_MB 40960http://
ztta/roll_extension 2000000000
ztta/roll_area 7000000
abap/heap_area_nondia 3000000000
in our system.
================
Category Resource Shortage
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 05.08.2014 16:44:40
|Short text |
| No more storage space available for extending an internal table. |
|What happened? |
| You attempted to extend an internal table, but the required space was |
| not available. |
|What can you do? |
| Note which actions and input led to the error. |
| |
| For further help in handling the problem, contact your SAP administrator |
| . |
| |
| You can use the ABAP dump analysis transaction ST22 to view and manage |
| termination messages, in particular for long term reference. |
| |
| Try to find out (e.g. by targetted data selection) whether the |
| transaction will run with less main memory. |
| |
| If there is a temporary bottleneck, execute the transaction again. |
| - |
| |
| If the error persists, ask your system administrator to check the |
| following profile parameters: |
| |
| o ztta/roll_area (1.000.000 - 15.000.000) |
| Classic roll area per user and internal mode |
| usual amount of roll area per user and internal mode |
| o ztta/roll_extension (10.000.000 - 500.000.000) |
| Amount of memory per user in extended memory (EM) |
| o abap/heap_area_total (100.000.000 - 1.500.000.000) |
| Amount of memory (malloc) for all users of an application |
| server. If several background processes are running on |
| one server, temporary bottlenecks may occur. |
| Of course, the amount of memory (in bytes) must also be |
| available on the machine (main memory or file system swap). |
| Caution: |
| The operating system must be set up so that there is also |
| enough memory for each process. Usually, the maximum address |
| space is too small. |
| Ask your hardware manufacturer or your competence center |
| about this. |
| In this case, consult your hardware vendor |
| abap/heap_area_dia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each dialog process. |
| Parameters for background processes: |
| abap/heap_area_nondia: (10.000.000 - 1.000.000.000) |
| Restriction of memory allocated to the heap with malloc |
| for each background process. |
| Other memory-relevant parameters are: |
| em/initial_size_MB: (35-1200) |
| Extended memory area from which all users of an |
| application server can satisfy their memory requirement. |
|Error analysis |
| The internal table "\FUNCTION-POOL=SCD5\DATA=DATA_TAB_POS" could not be further |
| extended. To enable |
| error handling, the table had to be delete before this log was written. |
| As a result, the table is displayed further down or, if you branch to |
| the ABAP Debugger, with 0 rows. |
| |
| At the time of the termination, the following data was determined for |
| the relevant internal table: |
| |
| Memory location: "Session memory" |
| Row width: 1568 |
| Number of rows: 424196 |
| Allocated rows: 424196 |
| Newly requested rows: 8 (in 1 blocks) |
|How to correct the error |
| The amount of storage space (in bytes) filled at termination time was: |
| |
| Roll area...................... 6221072 |
| Extended memory (EM)........... 2002738624 |
| Assigned memory (HEAP)......... 3000059984 |
| Short area..................... " " |
| Paging area.................... 32768 |
| Maximum address space.......... 4294967295 |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following
Similar Messages
-
TSV_TNEW_PAGE_ALLOC_FAILED dump in WDBU: Assortment listing
Hi all,
when my SD consultants are executing WDBU either in background or foreground we are getting dump:
TSV_TNEW_PAGE_ALLOC_FAILED
details are as follows:
No more storage space available for extending an internal table.
Error anslysis
The internal table "???" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1032
Number of rows: 6729552
Allocated rows: 6729552
Newly requested rows: 8 (in 1 blocks)
how to correct the error:
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2718352
Extended memory (EM)........... 5002852296
Assigned memory (HEAP)......... 2000090624
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
earlier the values for
ztta/roll_extension and abap/heap_area_total was 2 GB
for corrections i have made changes in the parameters as follows:
ES/TABLE SHM_SEGS
ztta/roll_extension 5000000000
abap/heap_area_total 5000000000
I have AIX OS and the RAM is 16 GB on this particualr application server, which is central Instance.
the swap space allocated is 40 GB.
please tell me what to do to resolve this particular issues.
regards,
PriyaThe selection criteria when you go to WBDU T-code are:
Assortment User:
sales organisation - we are specifying it
Distribution channel - we are specifying it
customer no. - site - we are just specifying one site
Assortment List:
Assortment List Type
Control Data:
Donot use cycle - we are ticking this option.
Generate Merged Versions
Parallel Processing
Max Number Of processes
Logon/ server Group - we are specifying the server the instance server.
what else can the selection criteria be narrowed down to.
Also in the dump when it says "The internal table "???" could not be further extended"what is table ??? means.
When i was going through SAP Notes i found few notes : 542669, 959104 , 740976. But these are applicable to ECC 500 and 470.mine is ECC 6.0 and our APPL level is 12.
What do you think can be done in this situation..
we are using just one site.
Regards,
Priya -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in CRM
Hi Experts,
While accessing the custom componenet in CRM system we are getting the dump TSV_TNEW_PAGE_ALLOC_FAILED saying No more storage space available for extending an internal table. And we are not getting this dump every time we access this componenet. We get it on a particular time. And when we checked the shared memory in SHMA during that time, Free memeory is very less. Automatically after sometime the free memory gets increased. Then the dump does not occur. What could be the reason. Do we need to change any memory parameter. Kindly clarify.
Thanks & Regards,
Sundara.The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested
because the program needed to expand an internal table, but none is available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error
TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
Are you using a 64-bit or a 32-bit system if it is a 64 bit system then refer to note 146289. This note shows how to Implement the SAP profile parameters.
See SAP Note 425207 for parameter limitations
Setting of em/initial_size_MB usually depends on the physical RAM on the server and if you have any other instances on that same server. According to note #146289 this can be increased to very high
values if there is sufficent RAM on the box.
Also please review the following notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
417307 Extractor package size: Collective note for applica
Regards,
Gervase -
TSV_TNEW_PAGE_ALLOC_FAILED Dump in Production BW 3.5 system
Hi Basis Gurus,
In our production BW 3.5 system we are getting dump in ST22.
The dump is TSV_TNEW_PAGE_ALLOC_FAILED
Please let me know what could be the reason for this dump and why we are getting it.
I tried searching in service market place and there we can find lot of things related to this dump.But not sure which one is specificaly related to this dump.
Our system details are as follows
BW 3.5
Solaris OS
Oracle Database.
Please help me in resolving this dump.
Regards,
Anil.Hello Anil,
what is the frequency of these dumps.
If the dump once in a while,you can simply ignore it
If frequency is more....you will need to reasrch a bit before increasing the paging memory as suggested previously
Just check what program is causing the dump,is it SAP standard program or a z program created by your developers.
If it is a SAP standard program just search on market place and look if any new version of the program exists which is tuned better and which consumes less memory
If it is a z program ask your developer to tune the program(this can be a highly cause of this dump as programs created usually consume a lot of memory due to which this dump occurs)
If none of these help,go for increase in the paging memory as previusly suggested
Rohit -
Strange TSV_TNEW_PAGE_ALLOC_FAILED dump...
Hi guys!
I have this weird problem:
I have a program that does some updates to standard tables. The program runs ok, but if I comment the "update" lines, the execution ends with this dump: TSV_TNEW_PAGE_ALLOC_FAILED
With the UPDATE doesn't cancel, without the update DOES cancel...
Do you have any idea?????
Thanks in advance!
BetHi,
probably there is a loop with reading data in an internal table:
- without update the process does not terminate at all or nearly does not
- with update the process terminates soon.
With kind R´regards
Walter Habich -
GD13: TSV_TNEW_PAGE_ALLOC_FAILED dump: workaround
Hi All,
While executing GD13 transaction code for some functional activity, the below dump is occurring:
TSV_TNEW_PAGE_ALLOC_FAILED.
Neither we can not change any memory parameter for a temporary activity which is consuming high memory, nor the activity can be splitted in steps for business criticality. From BASIS point view what can be done to make the GD13 activity successful avoiding the memory issue?
System ECC 6.0 (Netweaver 2004s)
(One SAP note: 600176, is available, but that is for lower version, not applicable for ECC 6.0)
Please share your ideas.
Thanks & Regards,
Sujit.Hi Juan,
Thanks for reply.
Below is the dump details:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
Error analysis
The internal table "\FUNCTION=G_GLU1_ACCUMULATE_FOR_GD13\DATA=E_T_GLU1_***"
could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4764
Number of rows: 966
Allocated rows: 966
Newly requested rows: 2 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server gvaaps51_PRD_51 on host gvaaps51 (wp 5)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
I am not pasting the SAP recommendation for increasing memeory parameter values, which is generic.
I have to find some way to help the team to execute the activity.
Your suggestion will be highly appreciated.
Thanks & Regards,
Sujit. -
TSV_TNEW_PAGE_ALLOC_FAILED dump Issue
Hello All,
We are facing this dump error when executed from SM35.
It is a ECC 6 PRD system on Windows(64bit) & SQL server.
What Happened:
Information on where terminated
Termination occurred in the ABAP program "SAPLSBDR" - in "BDC_OBJECT_SELECT".
The main program was "SAPMSBDC_CC ".
In the source code you have the termination point in line 59
of the (Include) program "LSBDRU04".
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4019392
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000021120
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "Hello Venkat,
Please find the details as per the SAP Note,
1.Memory consumption
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4019392
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000021120
Short area..................... " "
Paging area.................... 57344
Maximum address space.......... " "
2.System Data
System environment
SAP-Release 700
Application server... "SAP-PROD"
Network address...... "172.23.0.112"
Operating system..... "Windows NT"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAP-PROD"
Database type..... "MSSQL"
Database name..... "AEP"
Database user ID.. "aep"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
3.R/3 Storage Parameter
a.SAP Memory
Roll memory Dialog session kB 6,348
Nondialog sess. kB 6,348
Available kB 262,144
in shared memory kB 262,144
on disk kB 0
Used kB 9,778
Maximum used kB 20,280
Paging memory Session buffer kB 1,200
Available kB 262,144
in shared memory kB 131,072
on disk kB 131,072
Used kB 13,721
Maximum used kB 262,136
Extended memory Dialog session kB 1,953,125
Nondialog sess. kB 1,953,125
Available kB 9,904,128
Used kB 2,801,664
Maximum used kB 5,255,168
Heap memory Dialog session kB 1,953,125
Nondialog sess. kB 0
Used kB 0
Maximum used kB 9,908,208
b. Current Parameters
Profile Parameter Value Unit Comment
Roll, extended and heap memory EXTM
ztta/roll_area 6500000 Byte
ztta/roll_first 1 Byte
ztta/short_area 4000000 Byte
rdisp/ROLL_SHM 32768 8 kB
rdisp/PG_SHM 16384 8 kB
rdisp/PG_LOCAL 150 8 kB
em/initial_size_MB 9676 MB
em/blocksize_KB 4096 kB
em/address_space_MB 4096 MB
ztta/roll_extension 2000000000 Byte Max.
abap/heap_area_dia 2000000000 Byte Max.
abap/heap_area_nondia 0 Byte Max.
abap/heap_area_total 10146021376 Byte Max.
abap/heaplimit 40000000 Byte
abap/use_paging 0
Edited by: Hasan Bilali on Mar 6, 2012 4:38 PM
Edited by: Hasan Bilali on Mar 6, 2012 4:41 PM -
TSV_TNEW_PAGE_ALLOC_FAILED dumps
The dump says u201CNo storage space available for extending an internal tableu201D.
The control is dumping at FM :ARFC_RUN
at line append data_of_dest
Kindly help
Thanks in advanceYour program is using too much memory space (i.e. internal tables are too large). Before you follow advice to have available memory extended, better check your program logic.
Maybe you can delete temporary internal tables using the FREE command, or you can implement some sort of block processing (fill internal table with e.g. 10K records, process, delete, fill with next 10K records etc.)
Thomas -
Production error - Urgent - TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
Im getting dumps in production system with
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required.
Any pointers to this wil be helpful
thanks
Boomathe TSV_TNEW_PAGE_ALLOC_FAILED dump has naught to do with the version of MCVBAPB. the dump clearly states that there was no more paging area available to run the report/transaction that caused the dump. this might either be due to an too big selection or a lack of memory. Consult your basis-people with that one.
the version of MCVBAPB: MCVBAPB is a structure belonging to LIS (Logistics Information System) so obviously someone changed that structure. check in t-code SE11, MCVBAPB the runtime and the database object of the structure (in case it is active). -
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 18.11.2009 12:12:09
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin SharmahI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " " -
Short dump TSV_TNEW_PAGE_ALLOC_FAILED when import SAPKB70016
Hi all,
I´m trying to import the support package SAPKB70016 im my QAS system and I got an error. The import stop on phase XPRA_EXECUTION and I saw at the tcode sm37 that there is a job running with the name RDDEXECL. This job is canceled with the dump TSV_TNEW_PAGE_ALLOC_FAILED. I already changed some parameters and also I applied some notes but I can´t solve this issue.
Parameter changed Before After
ztta/roll_area 30000000 100000000
ztta/roll_extension 4000317440 8000000000
abap/heap_area_dia 2000683008 4000683008
abap/heap_area_nondia 2000683008 4000683008
abap/heap_area_total 2000683008 4000683008
em/initial_size_MB 392 1024
abap/shared_objects_size_MB 20 150
es/implementation map std
JOB LOG:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server FQAS were synchronized
ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
Job cancelled
ST22 LOG:
Memory location: "Session memory"
Row width: 510
Number of rows: 0
Allocated rows: 21
Newly requested rows: 288 (in 9 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server FQAS_QAS_01 o
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhau
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1897
The error reported by the operating system is:
Error number..... " "
Error text....... " "
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 99661936
Extended memory (EM)........... 8287273056
Assigned memory (HEAP)......... 1376776176
Short area..................... " "
Paging area.................... 49152
Maximum address space.......... 18446743890583112895
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_ENH_UTILITIES_XSTRING======CP" or "CL_ENH_UTILITIES_XSTRING======CM008"
"GET_DATA"
Now, I don´t know what I can do to solve this problem.
Can you help me?
ThanksHi all,
Gagan, I already changed my parameters according to the above post. I increased this parameters until maximum allowed but the dump still persists.
Bhuban
In this server I have 16GB RAM and 600GB HD.
total used free shared buffers cached
Mem: 16414340 4973040 11441300 0 454436 3572592
-/+ buffers/cache: 946012 15468328
Swap: 20479968 0 20479968
Size Used Avail Use% Mounted on
441G 201G 218G 48% /oracle
20G 6.5G 12G 36% /sapmnt
25G 21G 2.7G 89% /usr/sap/trans
25G 8.8G 15G 39% /usr
20G 14G 5.1G 73% /
Anil, I already stop my appl and my db, I rebooted my OS too and after i tried again, no success.
What else can i do?
Thanks for all. -
Hi All,
I'm currently having problems with the deletion/archiving process on one of my XI boxes. I has been
configure to use the Switch Procedure and, the error happens during the TABLE_SWITCH procedure.
Due to this error, I have 1 dump per day and the other jobs related with this task are failing.
The dump says:
TSV_TNEW_PAGE_ALLOC_FAILED
and I have found note 1017000 for this issue and sucesfully applied.
According to the note, next step should be:
"To stop the archiving process, start the deletion process for the failed
archiving runs manually directly from the archive administration."
by I'm not able to do that. I go to XMS_SATA and with object name BC_XMB try to run the "Delete" action
but can not continue as there is no archive file to select.
Anyone with the same issue?
Thanks in advance?Hi Prateek,
Thanks for your help but I don see how is this related to XI. I read about IS-OIL and IS-MINE. I already found a note that helps with this issue but I'm stuck with one of the steps and can cancel the copy process.
Regards,
Encinas -
Hi SAP Gurus,
Production system SAP R/3 Enterprice. 4.7
OS:AIX 5.3
DB:DB2
memory Parameters are already set properly, there was no issues from past 3 years, We din't change any parameter recently.
All my Pay run B/G job canceling due to dump: TSV_TNEW_PAGE_ALLOC_FAILED
B/G job log
================
11/26/2007 03:01:22 Job started
11/26/2007 03:01:22 Step 001 started (program RBDSER01, variant YBD40_01, user ID BC-BATCH)
11/26/2007 03:01:22 0 master IDocs set up for message type CHRMAS
11/26/2007 03:01:22 0 communication IDoc(s) generated for message type CHRMAS
11/26/2007 03:01:23 0 master IDocs set up for message type CLSMAS
11/26/2007 03:01:23 0 communication IDoc(s) generated for message type CLSMAS
11/26/2007 03:01:23 0 master IDocs set up for message type CLFMAS
11/26/2007 03:01:23 0 communication IDoc(s) generated for message type CLFMAS
11/26/2007 03:05:53 ABAP/4 processor: TSV_TNEW_PAGE_ALLOC_FAILED
11/26/2007 03:05:54 Job cancelled
Please let me know ASAP,
Thanks & Regards,
Kishore.
nullHi,
If you did'nt change anything in the system, you'd better open a SAP support call urgently as it is a production problem...
>>>Production system SAP R/3 Enter<b>price</b>. 4.7
Nice and well choosen typo !
Regards,
Olivier -
Hi All,
I am getting the dump TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB in LCOM_PARTNER_OB in line 165.
Short text
No more storage space available for extending an internal table.
What happened
You attempted to extend an internal table, but the required space was not available.
The error is occuring in line
INSERT GS_CURRENT_PARTNERSET INTO TABLE GT_PARTNERSETS.
CT_PARTNER[] = GS_CURRENT_PARTNERSET-PARTNER[]. "#EC ENHOK
ENDIF.
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 6221152
Extended memory (EM)........... 3909511400
Assigned memory (HEAP)......... 2000692032
Short area..................... " "
Paging area.................... 417792
Maximum address space.......... 18446697117078316543
The dump is occuring in the standard program. Is there any note for this.
Kindly help.
Thanks,> I am getting the dump TSV_TNEW_PAGE_ALLOC_FAILED in program SAPLCOM_PARTNER_OB in LCOM_PARTNER_OB in line 165.
> Extended memory (EM)........... 3909511400
> Assigned memory (HEAP)......... 2000692032
> The dump is occuring in the standard program. Is there any note for this.
Did you try a notes search?
This program is already using roughly 6 GB of RAM which seems quite a lot.
What transaction/process is triggering this error? It may be that a user just selects too much data.
Markus -
APD master data join - ABAP dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi,
I have created an APD to join 3 ISU master data infoobjects
1. left join 0UCPREMISE with 0UC_CONNOBJ
2. left join 0UCINSTALLA with result of 1.
3. Store the data in ODS
When I did this in DEV (D4S) everything worked - but there is also much
less data in the master data infoobjects.
When running the APD in Test (Q4S) I get ABAP dump after a while (not
time out): TSV_TNEW_PAGE_ALLOC_FAILED
1. I have tried with the APD setting to store in internal memory to OFF
but the same problems occur.
2. I tried to create index (on /BI0/P* ) for fields part of the join
which was not table key but same problem occurs.
3. I have no filters for the joins as I want to get all master data in
the output ODS.
4. The size of the p-tables are:
/BI0/PUCPREMISE = 1 385 792
/BI0/PUC_CONNOBJ = 1 031 272
/BI0/PUCINSTALLA = 2 445 742
5. Components + SP level:
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D
ST-PI 2005_1_700 0005 SAPKITLQI5
SAP_BW 700 0015 SAPKW70015
BI_CONT 703 0005 SAPKIBIIP5
Linux / Oracle 10.2.0.2.0
6. Info from ABAP Dump:
Error analysis
The internal table "\CLASS=CL_RSMD_RS_UTILITIES\METHOD=DATA_TO_RETURN\DATA=L_SX
RETURN-TVALUE" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 200
Number of rows: 15
Allocated rows: 15
Newly requested rows: 64 (in 1 blocks)
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server q4s_Q4S_72 on host q4s (wp 12)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1881
The error reported by the operating system is:
Error number..... " "
| Error text....... " "
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 2755600
Extended memory (EM)........... 1977608256
Assigned memory (HEAP)......... 2000733904
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"CL_RSMD_RS_UTILITIES==========CP" or "CL_RSMD_RS_UTILITIES==========CM006"
| "DATA_TO_RETURN"
Anybody have any idea what i can do to be able to run this APD (in production I want to run it on a monthly basis). To me it seems the APD fills 2 gig of mem, I thought the APD option to not store the complete dataset in internal memory (using temp tables instead) would kick in before the 2 gigs was used. Basis team didn't want to raise mem paramenters if it could be sorted out any other way.
Thanks,
JohanI have searched on my problem before posting here ofcourse - but somehow I missed this one, mentioned in 794257:
"InfoObject" data source
A dump occurs because of a memory overflow in the SAPLRSDM_F4 function group in the SD_CHA_GET_VALUES function module.
The InfoObject data source for reading master data is currently based on a function module that loads all data into the main memory in an inefficient data structure. As a result, the data source is only suitable for reading master data with a few data records. A memory overflow can occur for master data tables with lots of records such as business partners or products. This occurs regardless of how the "Process data in the memory" indicator was set.
If this situation occurs, set the InfoObject in such a way that it is available as an InfoProvider. Then use the "InfoProvider" data source instead of the "InfoObject" data source in the analysis process.
I'll try this...
//Johan
Maybe you are looking for
-
I need Help!!! Need to remove file from my project that I can't find
I'm on an extremely tight deadline and am trying to make a test DVD to show to client and am getting a strange message that takes me to a dead-end. When I try to export using Quicktime Conversion, I get a message saying: "The movie file "...FIN-00000
-
Service Pack 2 for Windows Server 2003 broke our online connection to our self-hosted website
We have two office computers with Microsoft Server 2003. On one of these machines, we have hosted our own website for about 10 years. Eveything worked well until yesterday night, when Microsoft upgraded our webhost machine with Service Pack 2. When
-
Invoking JVM with C++
I'm having the problem identical to the one in this post: http://forum.java.sun.com/thread.jspa?forumID=52&threadID=599688 I get the same error messages: invoke.obj : error LNK2001: unresolved external symbol __imp__JNI_CreateJavaVM@12 invoke.obj : e
-
Could not install on HD error going from 10.5.8 - 10.6
Hi folks. I got the same error that everyone seems to get - i tried everything suggested in the forum (partition resize, no pgp, etc) - no good. It may be that I am running a mirrored drive on my MacBook Pro? Anyway, I cloned it to a standalone disk
-
Crash in application by using TestStand 4.0 and CVI labWindows 8.01
Our application often crashes in two areas: 1) Often crash in the case: During running, if there is poop, like error message, you want to debug by opening other programs,like notepad. It shows error signature: AppName: operator Interface