TSV_TNEW_PAGE_ALLOC_FAILED Error in VF04 tcode

Hi Guru's
When I am executing T-code VF04 (SDBILLDL) with Input value,I am getting dump of " TSV_TNEW_PAGE_ALLOC_FAILED alon with the short Text " No more storage space available for extending an internal table."
Is it has any SAP notes for solving this problem.???
Regards
P.Senthil Kumar

Hi Volker Binder,
We unable to inform basis people to extend memory space in our system without giving any proper notes..
i want to give detailed solution for this then only basis people extend the memory space..
is it has any sap notes for solving this issue..
Regards
P.Senthil Kumar

Similar Messages

Error in the tcode KOK3

Hi gurus,
im getting the following error in the tcode KOK3 (Collective Disp. Internal Orders , part of FI/CO package, KAUF), after applying the new support pack. Error is as follows:
System error: Error in routine T021Q_SON_LESEN SAPMKAUFORC 0
Message no. F4308
Diagnosis
An internal error has occurred.
System Response
Processing cannot be continued.
Procedure
Contact SAP to clarify whether the error can be corrected by a program adjustment or by changes in the parameters.
In order to clarify the error situation, specify the routine T021Q_SON_LESEN in which the error occurred, as well as any other parameters (if specified in the message) which could refer to a key which does not exist.
It tried to find the routine T021Q_SON_LESEN (may be due to its inactivation), but was unable to do find that.
Pl reply.
Thanx,
Naveen Vishal

It was resolved due to support pack.

Error with s_alr_87013019 tcode

Hi gurus!
I have an error with s_alr_87013019 tcode.
i have a purchase document that its pending and it must be showed on comitment column of s_alr_87013019.
But the comitment column is empty and all the import is in the real column wich is no correct.
Thanks.

Hi!
I have discovered that i dont have set the commint management in the type of orden in tcode KOT2.
I have set the flag but i have no lines in commitment for this orden in s_alr_87013019 report.
How can i solve this?
If i execute rkanbu01 whart consecuences can i have?
Thanks

How to handle the errors using RSRV tcode

Hi all,
Could any one give tell me how to handle the errors,(if possible give me some example errors)and correct the errors using RSRV tcode.
Thanks & Regards,
Aswini.

Hello Aswini,
For further details on RSRV go through the link:
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
Hope it helps
Cheers
SRS

"TSV_TNEW_PAGE_ALLOC_FAILED" errors

Our SAP system always gets the "TSV_TNEW_PAGE_ALLOC_FAILED" errors,
It has 16 GB physical memory and its em/initial_size_MB is 13.87 GB and its ztta/roll_extension isztta/roll_extension 2.79 GB.
I want to know where these errors come from :
(1)Our overall Extended Memory (em/initial_size_MB) is not large enough ?
(2)Or our overall Extended Memory is OK but ztta/roll_extension is too small ?
Please help me how to find out the root cause of this error.
Thank you very much.

is this dump for standard SAP or locally developed program? also check whether user ran report without any selection parameters? is this dump occurring frequently?
cheers,
-Sunil

TSV_TNEW_PAGE_ALLOC_FAILED Error in Mass Update of Alternative Hierarchies

Hi Experts,
I am updating Cost Centers in the alternative nodes by calling a standard Program
PERFORM hierarchy_generate IN PROGRAM saplkkhi.
All these Entries are coming from a file having a Cost Center and respective hierarchies
under which it should be updated.
Suppose in a file a Cost Center was attached to one node and if it needds to be detached
in to another node within same common node i am using a Function Module K_HIERARCHY_UPDATE
to update the cost center under given node.For all these Process i have created a Z Function
Module.
A report is executed in background which calls the above FM and was supposed to display all
the Cost Centers and Hierarchies attached.
Unfortunately I am getting TSV_TNEW_PAGE_ALLOC_FAILED Error even when i am Processing the
Report in Background.
Please help me solving this Issue.
Regards
Manjari Patankar

As an addition to the answer from Siegfried.
Very often SAP application developers define internal buffering tables (in ABAP) to store some information for the fast access. Initialization of these tables are normally programmed in some function modules that are called in certain scenarios. However I have seen the cases where initialization was not intended at all. Developers motivated it with the fact that corresponding functions are not designed to call them in batch many times or with large data volumes.
If such kind of initialization does not happen, you are going to have memory issues.
I would proceed as follows:
1. Run your job in foreground
2. In SM50/SM66 monitor the memory consumption of the work process.
3. When it goes high, debug the work process from SM50/SM66.
4. Being in debugger, look at the memory areas and find out objects that occupy a lot of memory.
5. Display these objects (normally internal tables) in ABAP editor and use "where used list" to find the places where they are initialized.
6. Try to call initialization functions/subroutines in your coding after each data package and subsequent commit work and wait.

"CALL_FUNCTION_CONFLICT_TYPE" runtime error while running tcode BPS0 in BW

Hi ,
Can anybody have any idea about this dump error in BW quality system while user running tcode BPS0 and getting this dump repeatedly please help me out on this.
Error in the ABAP Application Program
The current ABAP program "SAPLZBSV_BPS_E_PLA_VARIABLES" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
A function module was called incorrectly.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE'
     not caught in
    procedure "CHECK_FILE_ENTRIES2" "(FORM)", nor was it propagated by a RA
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The call to the function module "RSD_CHKTAB_GET_FOR_CHA_BAS" is incorre
    The function module interface allows you to specify only
    fields of a particular type under "E_CHNTAB".
    The field "L_TABNM" specified here is a different
    field type
How to correct
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CALL_FUNCTION_CONFLICT_TYPE" "CX_SY_DYN_CALL_ILLEGAL_TYPE"
"SAPLZBSV_BPS_E_PLA_VARIABLES" or "LZBSV_BPS_E_PLA_VARIABLESF01"
"CHECK_FILE_ENTRIES2"
Thanks & Regards
    Rituraj

Hello,
I get the answer. In program personal_data is associated with bapip0002 structure.
where as in function personal_data is associated with BAPIP0002B. and the structure of BAPIP0002 is differ to BAPIP0002B.
minaxi shah

Error while running tcode wwy1 in r/3

Hello,
I am beginner for Internet Transaction Server (ITS).
while running tcode wwy1 in SAP R/3, ther is an ABAP runtime error as below.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_COMMAND_0100" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the function "BAPI_EMPLOYEE_GETDATA" the STRUCTURE parameter "PERSONAL_DATA"
is typed in such a way
that actual parameters are not valid, unless they are compatible
according to the Unicode fragment view.
But when I run test for function "BAPI_EMPLOYEE_GETDATA", it display the result.
Can anyone have a clue ?
Thanks in regards.
Minaxi shah

Hello,
I get the answer. In program personal_data is associated with bapip0002 structure.
where as in function personal_data is associated with BAPIP0002B. and the structure of BAPIP0002 is differ to BAPIP0002B.
minaxi shah

HTTP error 500: Internal server error: In OAC0 tcode - CS Admin button.

Hi,
In our ecc system, when I go to OAC0 TCode and click the button CS Admin, it does open the page "Content Server administration" but on the bottom bar I always see error "HTTP error 500: Internal server error".
I want to know if this is normal. We have setup archiving a few years back.
The Archive database is Filenet system and using websphere web server.
Thanks.

Thanks you But ys, the backend archive server (in this case Filenet along with Websphere) is up and running all the time.
How do I check content repository connection?? is it in OAC0? If yes then we did it and it works fine.
We have also resent the certificate from OAC0 and it got imported at their end too. Yes our SAP system got refreshed but after that we created new entry in strustsso2 and exchanged the certificate. But till date I have always seen HTTP 500 on the "Content Server administration", enen on production server. Not sure if this is normal.
Apart from this, on non production systems we are unable to perform any kind of archiving too. We get HTTP500 whenever we run a Store Job.
Regards,

Error while adding tcode in favorites

Dear experts,
i got an error message when add tcode in portal favorites
Management trasactions cannot be called directly-message no sf474
it comes in my devlopemt ecc system but in production i easily add tcode in favorites
please help.....................

problem solved by me

Runtime error while executing Tcode FAGLL03

Hello experts
we have 2 clients in PRD
100,200
In 100 if i execute the tcode FAGLL03 it is showing the line items within 100 sec.
where as in 200 if i execute FAGLL03 it is showing runtime error.
if this executed in background it takes 1300 sec and finished successfully.
From basis perspective what would be the issue.
Regards
Ravi

Hello srini
Thanks for ur input
Details
Recording at local and central time........................ 06.05.2009 14:03:30
Task................ 07522 / Dialog work process No. 00
User................ DEVAKUMAR
Client.............. 200
Terminal............ H2SBASIS
Session............. 1
Transaction code.... FAGLL03
Program name........ FAGL_ACCOUNT_ITEMS_GL
Problem class....... T    Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abinit
Line................ 1890
Error text.......... ab_chstat
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. TIME_OUT
Technical details
File................ 000989
Position............ 0000261540
Entry type.......... l      ( Error (Module, Row)            )
Message ID.......... AB 0
Variable parts...... ab_chstat                                           abinit 1890
this is the log got from SM21.
The runtime error is time out error
Regards
Ravi

Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"

I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this.
"Internal error in program SAPLFIBS number 5"

Hi Dsr,
Use transaction code OB58->Highlight the Fin. Stmt. version you want to Change and click on the Display icon.->Next, click on the "Fin.Statement items" icon on the application tool bar. You can then expand and carry out your update as appropriate.
If you do not have the prerequisite authorisations, you wouldn't be able to do this.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Error while using Tcode MB1C

Hi
I want to add initial stocks to plant zs10 using movement type 561. But I am getting an error stating "Account determination for entry 0009 GBB ____ BSA 3000 not possible". I went into Tcode obyc for chat of account 0009 but I don't know how to proceed with this. Can anyone tell me how to rectify this error.
points will be awarded
thanks in advance
Subhash

Hi,
"Account determination for entry 0009 GBB ____ BSA 3000 not possible". means
You have to maintain the G/L Accounts in these combination.
Here 0009 --> Valuation Grouping Code
        GBB --> Transaction Event Keys
        BSA --> Account Grouping Code (General Modification)
        3000 --> Valuation Class
So first you have maintain the "Valuation grouping code" and assign this VGC to Valuation area with "OMWD" transaction.
I think this u have already done.i.e is 0009 u can check it once in OMED screen against u r valuation area.
Now go to OBYC transaction
Click on the Transaction Eventy Key "GBB"
It's asks for Chart of Accounts. Enter Chart of Accounts
Now maintain the G/L Accounts in the combination of Valuation class 3000, General modification BSA, Valuation grouping code 0009
I hope that problem that you will resolve
Thanks & Regards
Anilkumar Dalai

Want to run a BDC even if there is an error in the TCode

Hi,
In one of the screens in my BDC an error comes (this happens when that transaction is run from command prompt in foreground also). But in the actual transaction after the user sees the error, he is able to continue changing the fields on the screen and post it. However in BDC, as soon as the error comes, the BDC exits and comes back. I would like it to continue, just the way it does during the manual entry, is there a way I can do this?
The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC. I also tried using function module L_TO_CREATE_POSTING_CHANGE, but it gives the same error as the screen
FORM create_to USING r_mblnr TYPE mblnr
 r_to_lgort TYPE lgort_d
 r_sto_bin TYPE lgpla
 CHANGING rt_bapi_message TYPE type_t_bapi_message
 r_success TYPE c.
DATA: v_mode TYPE c,
 wa_bapi_message TYPE bdcmsgcoll.
CLEAR s_bdcdata.
REFRESH t_bdcdata.
PERFORM bdc_dynpro USING 'SAPML02B' '0203'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RL02B-MBLNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
PERFORM bdc_field USING 'RL02B-MBLNR'
 r_mblnr.
PERFORM bdc_field USING 'RL02B-MJAHR'
 '2009'.
PERFORM bdc_field USING 'RL02B-DUNKL'
 'H'.
PERFORM bdc_dynpro USING 'SAPML03T' '0102'.
PERFORM bdc_field USING 'LTAP-NLTYP'
 r_to_lgort.
PERFORM bdc_field USING 'LTAP-NLBER'
 '001'. "destn storage section
PERFORM bdc_field USING 'LTAP-NLPLA'
 r_sto_bin. "destn storage section
v_mode = 'N'.
CALL TRANSACTION 'LT06'
 USING t_bdcdata
 MODE v_mode
 UPDATE 'S'
 MESSAGES INTO t_messtab.
IF sy-subrc <> 0.
IF sy-subrc = 0.
 LOOP AT t_messtab INTO wa_bapi_message.
 APPEND wa_bapi_message TO rt_bapi_message.
 EXIT.
 MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
 WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
 ENDLOOP.
ELSE.
 LOOP AT t_messtab INTO wa_bapi_message.
 MESSAGE ID wa_bapi_message-msgid TYPE wa_bapi_message-msgtyp NUMBER wa_bapi_message-msgnr
 WITH wa_bapi_message-msgv1 wa_bapi_message-msgv2 wa_bapi_message-msgv3 wa_bapi_message-msgv4.
 APPEND wa_bapi_message TO rt_bapi_message.
 ENDLOOP.
 APPEND t_messtab to rt_bapi_message.
ENDIF.
COMMIT WORK AND WAIT.
ENDFORM. "create_to
Thanks for reading

Hi ,
Now as per the transaction an error is prompted only when the compiler interprets it as false on a data field or a combination of them . Now its in the programmers hand to validate the data before submitting it to the screen .. now this validation should cover all scenario's . One point i want to make here is that bdc is nothing but replaying how the user enter's manually for no of records..
i dont know about this tcode LT06 .
//The Tcode is LT06 and when user enters the Material doc and click on enter the error occurs, but in the manual mode he is able to enter the Destn Bin, storage type etc and continue. However that is not the case with BDC.//
you are entering the material doc no in screen 0203 ..use all screen mode and check what is the error prompting if any and in the normal debugging track that error if some user exit is written using sy-binpt with some error message..
did you tried some relavant tcode other than LT06 which can be used for this purpose cause sometimes we have alternate tcodes to run the bdc .. please check on this .
Br,
Vijay.

Dump error while running tcode

Hi
When i am running my payroll with standard tcode pc00_m10_calc that tcode is going into abap runtime error.,
I even checked with abap and basis but can able to solve the prob so kindly help me
Error in the ABAP Application Program
The current ABAP program "RPMENUSTART00" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RPCALCU0 " in include "RPCASFU0
" in
line 216:
"The FORM "FUUNMEX" does not exist, but there is a FORM with the similar"
name "FUENAME" . . ."
The current ABAP program "RPMENUSTART00" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Note: for INDIA and INTERNATIONAL i can open the tcode and run a payroll but only for US payroll i cant open the standard tcode
Thanks
Vibin

check sap note 1599678

TSV_TNEW_PAGE_ALLOC_FAILED Error in VF04 tcode

Similar Messages

Maybe you are looking for