TSV_TNEW_PAGE_ALLOC_FAILED Short Dump
Hi
I am scheduling a Setup tables job in background to fill setup table but i am getting a short dump with TSV_TNEW_PAGE_ALLOC_FAILED error
any ideas on how can i fix it
Thanks in advance
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested by the system because the program needed to expand an internal table, but not is available. When Extended Memory is completely used up, the process will go into PRIV mode and it will start using Heap Memory in case of Windows or vice versa in case of Unix. Once this enters into PRIV mode, no other user will be able to use the corresponding work process. If there is enough memory for it to finish, You will not see the error.
Note: Internal table can store max of 2GB data.
Please refer the following SAP notes:
SAP Note 649327 Analysis of memory consumption.
SAP Note 20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
SAP Note 185185 Application: Analysis of memory bottlenecks
SAP Note 369726 TSV_TNEW_PAGE_ALLOC_FAILED
What can you do?
1) Process smaller chunks of data. (E.g. not all 50.000 records at once) is one option.
2) Create a memory snapshot right before the program dumps and analyze where the memory is consumed in order to understand if or where you can reduce memory consumption.
Similar Messages
-
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED
Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 18.11.2009 12:12:09
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Try to find out (e.g. by targetted data selection) whether the
transaction will run with less main memory.
If there is a temporary bottleneck, execute the transaction again.
If the error persists, ask your system administrator to check the
following profile parameters:
o ztta/roll_area (1.000.000 - 15.000.000)
Classic roll area per user and internal mode
usual amount of roll area per user and internal mode
o ztta/roll_extension (10.000.000 - 500.000.000)
Amount of memory per user in extended memory (EM)
o abap/heap_area_total (100.000.000 - 1.500.000.000)
Amount of memory (malloc) for all users of an application
server. If several background processes are running on
one server, temporary bottlenecks may occur.
Of course, the amount of memory (in bytes) must also be
available on the machine (main memory or file system swap).
Caution:
The operating system must be set up so that there is also
enough memory for each process. Usually, the maximum address
space is too small.
Ask your hardware manufacturer or your competence center
about this.
In this case, consult your hardware vendor
abap/heap_area_dia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each dialog process.
Parameters for background processes:
abap/heap_area_nondia: (10.000.000 - 1.000.000.000)
Restriction of memory allocated to the heap with malloc
for each background process.
Other memory-relevant parameters are:
em/initial_size_MB: (35-1200)
Extended memory area from which all users of an
application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin SharmahI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " " -
TSV_TNEW_PAGE_ALLOC_FAILED - error -Short Dump - Storage Problems
Dear Gurus,
I am new at SAP Basis, can you please help with the following;
One of our FI System Analyst is running a FI report that gives the followin error:
ABAP runtime errors TSV_TNEW_PAGE_ALLOC_FAILED
Occurred on 30.04.2008 at 11:11:14
>> Short dump has not been completely stored. It is too big.
Please helpIs the report a standart report or a custom one?
If custom, then the report might be using too much memory. You have to look into the report to optmize it. -
Getting short dump "TSV_TNEW_PAGE_ALLOC_FAILED" during the load
Hi Experts,
I am getting short dump "TSV_TNEW_PAGE_ALLOC_FAILED" when loading data one ODS to Two cubes in 3.1 system . we have only 12000 records to load. this load is delta update. daily we loaded 14000 record from this load but today we are getting short dump.
Short Dump : TSV_TNEW_PAGE_ALLOC_FAILED
Description : No storage space available for extending the internal table.we attempted to extend an internal table, but the required space wasnot available.
ThanksThis is a memory issue whereby an internal table requires more memory than what is currently available. If you're executing this during processing of other ETL, then your memory is being consumed by all of the processes and you would need to change your schedule as to balance the load better.
Another possibility is that you have an extremely inefficient SQL statement in a routine that is causing the memory to be overly consumed. Even though the output may be less than average, there is a possiblity that it's reading more data in a SELECT statement and therefore requires more memory than normal.
Finally, have you Basis team look at this issue to determine if there's anything that they can do to resolve it. -
Short Dumps in BW Production System
Hi BW Experts,
When iam loading the PCA data (0PCA_C01), i am getting the following Short Dumps in my Systems.
DBIF_RSQL_SQL_ERROR
RAISE_EXCEPTION
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
TSV_TNEW_OCCURS_NO_ROLL_MEMORY
SYSTEM_NO_ROLL
Today i got 131 Short Dumps in my System.
Please can anyone tell me the solution for this Short Dumps.
Thanks in advance
Regards,
AnjaliI am receiving the following Run time error in a Process Chain
Name of the runtime: System_NO_ROLL
*Information on where terminated*
The termination occurred in the ABAP program "GP45O123XOQKIU82AMIR5C27RCN" in
"ROUTINE_9998".
The main program was "SAPMSSY1 ".
The termination occurred in line 3255 of the source code of the (Include)
program "GP45O123XOQKIU82AMIR5C27RCN"
of the source code of program "GP45O123XOQKIU82AMIR5C27RCN" (when calling the
editor 32550).
Source Code Extract
Line SourceCde
3225 *delete DATA_PACKAGE where CRM_SRVORG <> '50000053'.
3226 *** Move data package to internal table******************************
3227 *it_package[] = DATA_PACKAGE[].
3228 *SORT it_package ASCENDING BY CRM_ACGUID.
3229 *DELETE ADJACENT DUPLICATES FROM it_package
3230 * COMPARING CRM_ACGUID.
3231 *ilookup[] = it_package[].
3232 *SORT ilookup ASCENDING BY CRM_ACGUID.
3233 ** if abort is not equal zero, the update process will be canceled
3234 * ABORT = 0.
3235
3236 * New code to get the Interaction id for Quick Close
3237 DATA : it_package like STANDARD TABLE OF DATA_PACKAGE.
3238
3239 delete DATA_PACKAGE where CRM_SRVORG <> '50000053'.
3240
3241 it_package[] = DATA_PACKAGE[].
3242
3243 DELETE it_package where crm_prctyp <> 'Z260'
3244 AND crm_preotp <> 'BUS2000126'
3245 AND crm_predoc is INITIAL.
3246 SORT it_package ASCENDING BY crm_predoc.
3247
3248 DELETE ADJACENT DUPLICATES FROM it_package
3249 COMPARING crm_predoc.
3250
3251 SELECT CRM_ACGUID CRM_OBJ_ID FROM /BIC/AZ0SAL_D100 INTO TABLE ilookup
3252 FOR ALL ENTRIES IN it_package
3253 WHERE CRM_ACGUID = it_package-crm_predoc.
3254
>>>>> SORT ilookup ASCENDING BY CRM_ACGUID.
3256
3257
3258 -
Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80
Hi experts,
I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004). We have a user who cannot save BW reports to his favorites and he is getting a number of error messages. OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80. The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications. I have attempted to execute this program on several occassions and always get run-time errors (short dumps). Here is the error:
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 2008.09.17 19:00:49
ShrtText
No storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters. Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
Thanks,
HCHi,
The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system. Not sure what that means.
The full dump is too large to paste here. I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user. Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
Thanks for your answer.
//HC -
What is the maximum number of recursive call as i think it is causing short dump
Hi All,
This may not have a specific answer i suppose but approx is also fine. There was a short dump in production ( the background job failed , an is failing each day since a week now ). I was analysing it what i found was the cause for there was numerous call to the same routine within it self ( recursion ). The exact number i dont have but they were atleast more the 200.
The error message which i get is :
Are there any solution regarding
Category
Resource Shortage
Runtime Errors
TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
it would be great if we know the max numbers of an recursive call so that i can do the necessary changes or if some 1 has any other alternative solution pls. help.
Regards,
Dhruvin
P.s : it's a productive environment issue.The dump is not caused by depth of recursion but rather memory limits being exceeded by your process, these are controlled by profile parameters (System administrator stuff) and "normally" (unless changed to other values) allow up to 4 GB of memory usage (mostly by internal tables). You can quickly check the current memory consumption of your active process via SM50.
Make sure that the routine that is called recursively (or other relevant parts of your process) free up memory by using CLEAR and FREE statements for internal tables that are no longer needed.
If data is being selected from the database also look into block processing via the PACKAGE SIZE option.
Thomas -
Short dump errors desc--how to resolve
I would like to know the short dump errors meaning and how to resolve it. i have the following errors
1. TSV_TNEW_PAGE_ALLOC_FAILE----
for this the description for ERROR ANALYSIS is : The internal table "IT_24" could not be enlarged further. To allow error handling, the table has to be deleted before this log was created.HOW TO CORRECT THE ERROR is : the amount of storage space was (in bytes) filled at termination time was:
Roll area..........1708928
Extended memory (EM).........440057520
Assigned memory (HEAP).......465813648
short area.........." "
Paging area.....33857536
Maximum address space....." "
2. DBIF_DSQL2_SQL_ERROR----
HOW TO CORRECT THE ERROR is:
Database error text......."ORA-01555: snapshot too old: rollback segment number 2 with name "PRS_0" too small"
Database error code - 1555
Triggering SQL statement......."FETCH NEXT"
Internal call code................"[DBDS / NEW DSQL]"
Please check the entries in the system log (Trasaction SM21)
3. TSV_LIN_ALLOC_FAILED----
this error analysis which also gives HOW TO CORRECT THE ERROR is almost the same like the first error description which i have written like memory space and so on
i would appreciate if u could clarify these errors and how to resolve it. Thanks in advance.Hi,
TSV_TNEW_* error are the memory problems in BI, you need to wait untill the system load is reduced...check the TA: SM37 and then repeat the failed steps, it will be successful.
DBIF_* are database releated errors....oracle backend error, u need to find out where the error has occured in the SQL statement and fix the error.
Usually these errors will the locks.
Oracle 8i error message says:
<u><b>ORA-01555</b></u>
snapshot too old: rollback segment number string with name "string"
too small
Cause: Rollback records needed by a reader for consistent read are overwritten
by other writers.
Action: Use larger rollback segments.
Regards,
Vijay
Message was edited by:
Vijaya Kumar Malyavantham -
Changing message text for short dumps
Hi, we have users running open transactions and finally core dumps with message:
TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
Is there a way to customize the message a bit to give more helpful information?
Thanks,
Jonathan.Jonathan,
I am not an expert in BASIS, so I cannot say if it is possible to change the texts for these messages. I am a bit surprised that you think " No more storage space available for extending an internal table" is not adequate. In addition, I am a more than a bit surprised that you are implicitly expecting to get dumps, so much so that you want to make the messages more user-friendly.
Runtime errors are not a tool to remind users that they have performed an impermissable activity. When a dump occurs, you pray that SAP will properly roll back all data to a consistant, pre-error state. I assure you, that this will not always happen in a complex environment. A runtime error is normally considered a very serious event. In most companies, it is the goal to never have a runtime error, and someone is usually charged with running these down and eliminating them. And that 'someone' is not a user.
Anyhow, you might want to try one of the many ABAP forums, one of the experts there may be able to assist you in changing these texts.
Sorry I couldn't be of more assistance,
DB49 -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
SHORT DUMP WHILE EXECUTING DTP.
Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu -
Custom error message in user exit is giving Short dump
Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
lc_zin TYPE vbak-auart VALUE u2018ZINu2019,
lc_zir TYPE vbak-auart VALUE u2018ZIRu2019,
lc_text(32) TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
CLEAR ok_code.
LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see... -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE
Hi All
I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
After we release the CU design to Generate order we get SHORT DUMP.
Any help will be of great help.
I am pasting the details from the dump file here.
Please let me know.
Appretaite your help.
Thanks
Meghana
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Date and Time 27.08.2007 18:01:10
Short text
"The current application triggered a termination with a short dump."
What happened?
Error in the ABAP Application Program
The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "MESSAGE_TYPE_X"
on the called page.
How to correct the error
Please refer to the notes described in the
short dump.
System environment
SAP-Release 700
Application server... "MB1ES1005"
Network address...... "10.191.97.206"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "MB1ES1005"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jul 25 2007 00:57:05"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 121
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 14633136
Heap.... 0
Page.... 131072
MM Used. 5005432
MM Free. 1263944
User and Transaction
Client.............. 200
User................ 10086330
Language key........ "E"
Transaction......... "/***/DESIGN "
Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
Program............. "/***/SAPLCUORDER_N"
Screen.............. "/***/SAPLCUORDER_N 2000"
Screen line......... 34
Information on where terminated
Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
"SAVE_DESIGN".
The main program was "/***/SAPLCUORDER_N ".
In the source code you have the termination point in line 594
of the (Include) program "/***/LCUORDER_NF07".
Source Code Extract
Line
SourceCde
564
ENDIF .
565
ENDLOOP .
566
IF l_ret-type = 'E' OR
567
l_ret-type = 'A' .
568
CLEAR: save_okcode .
569
570
Show Messages
571
CALL FUNCTION '/***/N_LOG_ADD_MSG'
572
EXPORTING
573
i_log_type = 'G'
574
TABLES
575
t_ret = t_ret.
576
PERFORM log_order_create_show .
577
Show first Message
578
MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
579
WITH
580
l_ret-message_v1 l_ret-message_v2
581
l_ret-message_v3 l_ret-message_v4.
582
CALL FUNCTION '/***/N_DESIGN_INIT' .
583
ELSE .
584
IF g_design_mode = con_mode_crea.
585
Need to update DMS documents with real design number
586
PERFORM document_prepare_002 USING con_desnum_tmp_1
587
lv_desnum.
588
ENDIF.
589
Commit design BAPI's
590
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
591
592
IF save_okcode = con_order.
593
Commit order BAPI's
>>>>>
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
595
DESTINATION 'NONE'.
596
597
call of fct. RFC_CONNECTION_CLOSE is important to get a new
598
initial roll area with initial internal tables next time
599
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
600
EXPORTING
601
destination = 'NONE'
602
EXCEPTIONS
603
destination_not_open = 1
604
OTHERS = 2.
605
ENDIF.
606
607
IF lv_desnum IS INITIAL .
608
lv_desnum = /***/cudesign-desnum .
609
ENDIF .
610
SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
611
Changes saved
612
MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
613
ENDIF .
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
2000
SY-UCOMM
CU01
SY-TITLE
Change Design: 50000109
SY-MSGTY
X
SY-MSGID
00
SY-MSGNO
341
SY-MSGV1
MESSAGE_TYPE_X
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070827
SY-UZEIT
180110
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 594
SAVE_DESIGN
3 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 2616
CHECK_AND_SAVE_F07
2 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF04 311
USER_COMMAND_D2000
1 MODULE (PAI) /***/SAPLCUORDER_N /***/LCUORDER_NI05 28
USER_COMMAND_2000
Chosen variables
Name
Val.
No. 4 Ty. FORM
Name SAVE_DESIGN
%_DUMMY$$
2222
0000
0000
0000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_DESIGN_MODE
R
5
2
0
0
CON_MODE_CREA
I
4
9
0
0
GT_NODE_CUI
Table[initial]
SY-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DESNUM_TMP_1
TM00000001CY
543333333345
4D0000000139
000000000000
000000000000
LV_DESNUM
222222222222
000000000000
000000000000
000000000000
SAVE_OKCODE
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
CON_ORDER
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
SY-XPROG
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DELETE
LVMS
4545222222222222222222222222222222222222222222222222222222222222222222
C6D3000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CHECK_AND_SAVE_F07
CL_GUI_ALV_GRID=>MC_MB_VIEW
&MB_VIEW
2445544522222222222222222222222222222222222222222222222222222222222222
6D2F695700000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
GT_OP
Table IT_303[2x1320]
PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
Table reference: 118
TABH+ 0(20) = 7039FC3C5824DB3C00000000760000002F010000
TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
TABH+ 40( 8) = 08000000C1308001
store = 0x7039FC3C
ext1 = 0x5824DB3C
shmId = 0 (0x00000000)
id = 118 (0x76000000)
label = 303 (0x2F010000)
fill = 2 (0x02000000)
leng = 1320 (0x28050000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000093
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010FC3C
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 234 (0xEA000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60B7153D
collHook = 0x00000000
ext2 = 0x1024DB3C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE00FFC3C
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
G_BADI_PROGRAM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LOG_ERROR
2
0
0
0
CON_BUTT_DELETED
@11QDelete@
43355466676422222222222222222222222222222222
011C145C545000000000000000000000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
G_CU_EXIT_CU_EXPLODE
F0000000
F0000000
/***/CUDESIGN-OBJNR
CY00000000000000008835
4533333333333333333333
3900000000000000008835
0000000000000000000000
0000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_SEC_COUNT
0
0000
0000
LV_UPD
X
5
8
0
0
%_SPACE
2
0
0
0
GS_ROW_NO
0.0.0.1.
0000
1000
0000
0000
SCREEN
/***/CUDESIGN-GLTRP
2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
00
33222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
SWO_%CONTAINER
000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
SY-MSGNO
341
333
341
000
000
/***/CVCUI-CUTYP
2
0
0
0
SY-MSGV1
MESSAGE_TYPE_X
44554445555455222222222222222222222222222222222222
D533175F4905F8000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
No. 2 Ty. FORM
Name USER_COMMAND_D2000
/***/CVCUI
0.0.0.0.0.0.0.1. 000000
2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_MODE_COPY
C
4
3
0
0
LT_BAPI_RETURN
Table IT_1778[2x1088]
PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
Table reference: 310
TABH+ 0(20) = 8837083D407E1C3D0000000036010000F2060000
TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
TABH+ 40( 8) = 08000000C1308101
store = 0x8837083D
ext1 = 0x407E1C3D
shmId = 0 (0x00000000)
id = 310 (0x36010000)
label = 1778 (0xF2060000)
fill = 2 (0x02000000)
leng = 1088 (0x40040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 1
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x50C6073D
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1534 (0xFE050000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x6067033D
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE82F063D
delta_head = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CON_MODE_ORDE
O
4
F
0
0
TGSBT
22222222222222222222222222222222222222
00000000000000000000000000000000000000
00000000000000000000000000000000000000
00000000000000000000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
LS_NUMBERS-AUFNR_NEW
000001000677
333333333333
000001000677
000000000000
000000000000
T024I
200UT10100PG for Term & Comp
33355333335426672567622246672222222222222222
20054101000706F20452D0603FD00000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
LS_T399X
200UT10UM01 X INST 30UT01UT01
3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CON_VBKZ_U
U
5
5
0
0
/***/CU_ORDER_IO-DISP_FACTOR
2097152
0
0
LS_DESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
/***/CUDESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_DROP_COUNT
0
0000
0000
LS_DESIGN-DESNUM
000050000109
333333333333
000050000109
000000000000
000000000000
No. 1 Ty. MODULE (PAI)
Name USER_COMMAND_2000
GT_SELTAB_INIT
Table[initial]
Internal notes
The termination was triggered in function "RfcExtendedReceive"
of the SAP kernel, in line 422 of the module
"//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
The internal operation just processed is "FUNC".
Internal mode was started at 20070827180011.
Status of connection:
RFC state: " "
RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
CPI-C error text: "The current application triggered a termination with a short
dump."
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=26488)
When : 8/27/2007 18:1:10.942
Threads : 2
Computer Name : MB1ES1005
User Name : ec6adm
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 5e10
eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:056d71f0=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:62bd5803=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess (ntstcdbg.c (501))
056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack (dptstack.c (1367))
056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2 (dptstack.c (352))
056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack (dptstack.c (182))
056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax (abrabax.c (1243))
056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message (abrfcrcv.c (422))
056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive (abrfcrcv.c (59))
056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get (abfunc.c (5103))
056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc (abfunc.c (554))
056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri (abextri.c (552))
056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent (abrunt1.c (281))
056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep (abdynpro.c (492))
056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal (dymainstp.c (2398))
056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0 (dymainstp.c (1004))
056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl (dymainstp.c (360))
056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00 (dymain.c (1628))
056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00 (thxxhead.c (4773))
056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop (thxxhead.c (4455))
056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart (thxxhead.c (1173))
056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain (dpxxdisp.c (1121))
056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main (thxxanf.c (82))
056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup (crtexe.c (395))
056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 61fc
eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0799fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:64e9e4d3=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc (signt.c (610))
0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
/***/SAPLCUORDER_N
0
10.08.2007
10:12:44
541696
E
1
Typ
/***/CUDESIGN
0
10.08.2007
10:05:19
7168
2
Typ
/***/CU_ORDER_IO
0
10.08.2007
09:53:38
4096
3
Typ
/***/DESTYPE
0
10.08.2007
10:05:21
2048
4
Typ
/***/PRF_ORD
0
10.08.2007
10:05:21
4096
5
Prg
SAPMSSYD
0
04.04.2007
10:28:36
21504
E
6
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
7
Typ
/***/G_CUST
0
10.08.2007
09:53:39
3072
8
Prg
/***/SAPLTABLES
8
10.08.2007
10:13:00
19456
E
9
Typ
/***/G_CHAR
0
10.08.2007
10:05:21
3072
10
Prg
SAPLCTCE
10
09.09.2004
14:18:34
9216
E
11
Typ
CABN
0
18.09.2001
10:02:26
12288
12
Prg
SAPLICON
12
04.04.2007
10:10:28
27648
E
13
Prg
%_CICON
12
07.02.2006
10:40:00
104448
E
14
Typ
ICONT
0
04.04.2007
10:10:08
2048
15
Typ
NRIV
0
02.04.1998
08:14:54
3072
16
Prg
SAPLBSVA
16
04.04.2007
14:47:00
296960
E
17
Typ
/***/CU_ORDER_S_OP_N
0
10.08.2007
09:53:39
14336
18
Prg
CL_GUI_CONTROL================CP
18
28.02.2005
21:03:09
112640
E
19
Prg
%_CCNTL
18
18.02.2005
14:15:08
15360
E
20
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
21
Prg
CL_GUI_OBJECT=================CP
21
05.07.2005
13:10:15
375808
E
22
Prg
CL_GUI_CFW====================CP
22
28.02.2005
21:03:09
172032
E
23
Prg
CL_GUI_PROPS_CONSUMER=========CP
23
18.02.2005
14:15:08
30720
E
24
Prg
SAPLTHFB
24
04.04.2007
13:24:38
390144
E
25
Typ
EUDB
0
06.11.2003
20:28:08
8192
26
Prg
SAPLSFES
26
08.08.2007
16:46:17
259072
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Prg
SAPLSTTMYes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back. Suddenly it has started giving us this dump.
The code is as follows.
Commit design BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
IF save_okcode = con_order.
Commit order BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
DESTINATION 'NONE'.
Here con_order is CU01.
Please let me know if anybody has faced this problem earlier.
Thanks in Advance
Meghana
Maybe you are looking for
-
How to discover which Conditions exist throughout a book?
I am new to FM and I inherited a bookfile with 50 component files. Each has 20 conditions available, but it *appears* that only about 5 are ever used. Is there a way to search or generate a report on which Conditions are in use in the book (so I can
-
How to Update an XML schema..
Hi All, I am new to XML concept. I have a requirement to create a xml schema which will be updated on a weekly basis and a table which associated to the created xml schema.. when ever the Schema is updated the table should not get affected.. Is there
-
How to disable cache for a single query ?
Hello BW Experts, I am running a Bex query. since the cache is not getting cleared it shows me wrong results. how to disable the cache settings for a single query ? are these settings different if you are running query using a web template.. Please s
-
Trying to upgrade software for my iphone 4 and it is greyed out
i have an iphone 4 and have not been able to upgrade my software to either version 6 or 7. I am still runing version 5. When i go to sofware update to upgrade my software, my "download and install" is greyed out and does not allow me to update. An
-
In mail my inbox folder summary shows *(4294967294 messages)*, yet neither of the two email accounts have that amount of messages. If I click on an account it may or may not show the same amount of messages in the summary, but just valid mail in the